96 resultados para genetic screeing and testing
Resumo:
Babesia bigemina infections were investigated in four genetic groups of beef cattle and in Rhipicephalus (Boophilus) microplus engorged female ticks. Blood samples and engorged female ticks were collected from 15 cows and 15 calves from each of the following genetic groups: Nelore, Angus x Nelore, Canchim x Nelore, and Simmental x Nelore. Microscopic examination of blood smears and tick hemolymph revealed that merozoites of B. bigemina (6/60) as well as kinetes of Babesia spp. (9/549) were only detected in samples (blood and ticks, respectively) originated from calves. PCR-based methods using primers for specific detection of B. bigemina revealed 100% infection in both calves and cows, regardless the genetic group. Tick infection was detected by nested-PCR amplifications showing that the frequency of B. bigemina was higher (P 0.01) in female ticks collected from calves (134/549) than in those collected from cows (52/553). The frequency of B. bigemina was similar in ticks collected from animals, either cows or calves, of the four genetic groups (P > 0.05). (C) 2008 Elsevier B.V. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
In this work, genetic algorithms concepts along with a rotamer library for proteins side chains and implicit solvation potential are used to optimize the tertiary structure of peptides. We starting from the known PDB structure of its backbone which is kept fixed while the side chains allowed adopting the conformations present in the rotamer library. It was used rotamer library independent of backbone and a implicit solvation potential. The structure of Mastoporan-X was predicted using several force fields with a growing complexity; we started it with a field where the only present interaction was Lennard-Jones. We added the Coulombian term and we considered the solvation effects through a term proportional to the solvent accessible area. This paper present good and interesting results obtained using the potential with solvation term and rotamer library. Hence, the algorithm (called YODA) presented here can be a good tool to the prediction problem. (c) 2007 Elsevier B.V. All rights reserved.
Resumo:
Uma vez que a maioria dos carcinogênicos químicos não é capaz de causar efeitos danosos per se, o metabolismo desses compostos é a parte crucial da resposta inicial à exposição ambiental. Os distúrbios causados no balanço entre os processos de ativação e destoxificação podem, assim, explicar as variações individuais em resposta à exposição aos carcinogênicos. A quantidade de compostos carcinogênicos finais produzida depende da ação competitiva entre os passos de ativação e destoxificação, envolvendo as enzimas do citocromo P450 e das S-glutatião transferases.
Resumo:
Significant interindividual variations in health outcome may be caused by the inheritance of variant polymorphic genes, such as CYP2D6 and CYP2E1 for activation, and GSTM1 and GSTT1 for detoxification of chemicals. However. mechanistic studies linking the inheritance of predisposing genes with genotoxic effects towards cancer have yet to be systematically conducted. We have studied 54 lung cancer patients and 50 matched normal controls, who have been cigarette smokers, to elucidate the role of polymorphic genes in cancer. Our data indicates that the inheritance of unfavorable CYP2D6, CYP2E1, and GSTT1 genes is strongly correlated with the smoking-related lung cancer. For heavy cigarette smokers (> 30 pack-years), the smoking habit is the strongest predictor of lung cancer risk irrespective of the inheritance of unfavorable metabolizing genes. For moderate to light smokers (< 30 pack-years), the genetic predisposition plays on important role For the risk (odds ratio = 3.46; 95% CL = 0.46-40.2). Using a subgroup of the study population, we observed that cigarette smokers having the defective GST genes have significantly more chromosome aberrations as determined by the fluorescence-in-situ-hybridization (FISH) technique than smokers with the normal GST genes (P < 0.001). In conclusion, our study provides data to indicate that individuals who have inherited unfavorable metabolizing genes have increased body burden of toxicants to cause increased genetic damage and to have increased risk for cancer. Studies like ours can be used to understand the basis for interindividual variations in cancer outcome, to identify high risk individuals and to assess health risk. (C) 1997 Wiley Liss, Inc.
Resumo:
Arachis villosulicarpa is a perennial species cultivated for its soft and tasty seeds by indigenous inhabitants of the Mate Grosso State, Brazil. Besides A. hypogaea, this species is considered as the only species of Arachis which represents a valuable food source for human consumption. Due to the lack of knowledge concerning the genetic diversity of A. villosulicarpa, this study was conducted to evaluate the genetic variability of the accessions from the Germplasm Collection of CENARGEN/EMBRAPA (Brasilia, DF, Brazil) and Institute Agronomico (IAC, Campinas, SP, Brazil). In addition, the genetic similarity between A. villosulicarpa, the related wild species A. pietrarellii, and the cultivated peanut A. hypogaea cv. Tatu was evaluated. From the entire sample analyzed of A. villosulicarpa, the accession from Institute Agronomico showed the highest indices of diversity for both enzymatic systems analyzed, pointing this accession as a promising source of genetic variability that must be preserved in the Germplasm Bank. A high level of genetic similarity was observed between A. pietrarellii and A. villosulicarpa, supporting previous suggestions that A. pietrarellii could be the ancestral progenitor species of A. villosulicarpa or that both species originated from a common ancestor.
Resumo:
A laboratory setup was designed and put into operation for the development of solid oxide fuel cells (SOFCs). The whole project consisted of the preparation of the component materials: anode, cathode and electrolyte, and the buildup of a hydrogen leaking-free sample chamber with platinum leads and current collectors for measuring the electrochemical properties of single SOFCs. Several anode-supported single SOFCs of the type (ZrO(2):Y(2)O(3)+NiO) thick anode/(ZrO(2):Y(2)O(3)) thin electrolyte/(La(0.65)Sr(0.35)MnO(3)+ZrO(2):Y(2)O(3)) thin cathode have been prepared and tested at 700 and 800 degrees C after in situ H(2) anode reduction. The main results show that the slurry-coating method resulted in single-cells with good reproducibility and reasonable performance, suggesting that this method can be considered for fabrication of SOFCs. (c) 2005 Elsevier B.V. All rights reserved.
Resumo:
A microactuator made from poly(vinylidene fluoride) (PVDF), a piezoelectric polymer, was fabricated to control the gas flow rate through a glass micronozzle. The actuator was formed by gluing together two PVDF sheets with opposite polarization directions. The sheets were covered with thin conducting films on one side, that were then used as electrodes to apply an electric field to move the valve. The actuator has a rectangular shape, 3 mm x 6 mm. The device was incorporated with a micronozzle fabricated by a powder blasting technique. Upon applying a DC voltage across the actuator electrodes, one sheet expands while the other contracts, generating an opening motion. A voltage of +300 V DC was used to open the device by moving the actuator 30 mu m, and a voltage of -200 V DC was used to close the device by moving the actuator 20 mu m lower than the relaxed position. Flow measurements were performed in a low-pressure vacuum system, maintaining the microvalve inlet pressure constant at 266 Pa. Tests carried out with the actuator in the open position and with a pressure ratio (inlet pressure divided by outlet pressure) of 0.5, indicated a flow rate of 0.36 sccm. In the closed position, and with a pressure ratio of 0.2, a flow rate of 0.32 sccm was measured.
Resumo:
Milk yield, fat yield, and fat percentage during the first three lactations were studied using New York Holsteins that were milked twice daily over a 305-d, mature equivalent lactation. Those data were used to estimate variances from direct and maternal genetic effects, cytoplasmic effects, sire by herd interaction, and cow permanent environmental effects. Cytoplasmic line was traced to the last female ancestor using DHI records from 1950 through 1991. Records were 138,869 lactations of 68,063 cows calving from 1980 through 1991. Ten random samples were based on herd code. Samples averaged 4926 dams and 2026 cytoplasmic lines. Model also included herd-year-seasons as fixed effects and genetic covariance for direct-maternal effects. Mean estimates of the effects of maternal genetic variances and direct-maternal covariances, as fractions of phenotypic variances, were 0.008 and 0.007 for milk yield, 0.010 and 0.010 for fat yield, and 0.006 and 0.025 for fat percentage, respectively. Average fractions of variance from cytoplasmic line were 0.011, 0.008, and 0.009 for milk yield, fat yield, and fat percentage. Removal of maternal genetic effects and covariance for maternal direct effects from the model increased the fraction of direct genetic variance by 0.014, 0.021, and 0.046 for milk yield, fat yield, and fat percentage; little change in the fraction was due to cytoplasmic line. Exclusion of cytoplasmic effects from the model increased the ratio of additive direct genetic variance to phenotypic variance by less than 2%. Similarly, when sire by herd interaction was excluded, the ratio of direct genetic variance to phenotypic variance increased 1% or less.
Resumo:
We describe the design, manufacturing, and testing results of a Nb3Sn superconducting coil in which TiAIV alloys were used instead of stainless steel to reduce the magnetization contribution caused by the heat treatment for the A-15 Nb-3 Sn phase formation that affects the magnetic field homogeneity. Prior to the coil manufacturing several structural materials were studied and evaluated in terms of their mechanical and magnetic properties in as-worked, welded, and heat-treated conditions. The manufacturing process employed the wind-and-react technique followed by vacuum-pressure impregnation(VPI) at 1 MPa atm. The critical steps of the manufacturing process, besides the heat treatment and impregnation, are the wire splicing and joint manufacturing in which copper posts supported by Si3N4 ceramic were used. The coil was tested with and without a background NbTi coil and the results have shown performance exceeding the design quench current confirming the successful coil construction.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
We introduce a new hybrid approach to determine the ground state geometry of molecular systems. Firstly, we compared the ability of genetic algorithm (GA) and simulated annealing (SA) to find the lowest energy geometry of silicon clusters with six and 10 atoms. This comparison showed that GA exhibits fast initial convergence, but its performance deteriorates as it approaches the desired global extreme. Interestingly, SA showed a complementary convergence pattern, in addition to high accuracy. Our new procedure combines selected features from GA and SA to achieve weak dependence on initial parameters, parallel search strategy, fast convergence and high accuracy. This hybrid algorithm outperforms GA and SA by one order of magnitude for small silicon clusters (Si6 and Si10). Next, we applied the hybrid method to study the geometry of a 20-atom silicon cluster. It was able to find an original geometry, apparently lower in energy than those previously described in literature. In principle, our procedure can be applied successfully to any molecular system. © 1998 Elsevier Science B.V.
Resumo:
Wild Arachis germplasm includes potential forage species, such as the rhizomatous Arachis glabrata and the stoloniferous A. pinto and A. repens. Commercial cultivars of A. pintoi have already been released in Australia and in several Latin American countries, and most of these cultivars were derived from a single accession of A. pintoi (GK 12787). Arachis repens is less productive as a forage plant than is A. pintoi. However, it can be crossed with A. pintoi, and thus has good potential as germplasm for the improvement of A. pintoi. Arachis repens is also used as an ornamental plant and ground cover. Many new accessions of these two stoloniferous species are now available, and they harbor significant genetic variability beyond that available in the few older accessions, previously available. Therefore, these new accessions need to be conserved, documented and considered in terms of their potential for crop improvement and direct commercial use. Sixty-four accessions of this new germplasm were analyzed using RAPD analysis. Most of the accessions of A. repens grouped together into a clearly distinct group. In general, the accessions from the distinct valleys of the Jequitinhonha, Sao Francisco and Parana rivers did not group together, suggesting there is not a tight relation between dispersion by rivers and the geographic distribution of genetic variation in these species.