A oficina terapêutica como intercessão em problemáticas de sujeitos constituídos por foraclusão

O presente estudo é uma reflexão crítica sobre um estágio realizado para pensar o dispositivo Oficina na Atenção Psicossocial (CAPS), levantando, a partir da teoria psicanalítica lacaniana, questões que permitiram desenvolver um trabalho sobre o laço social de Lacan para refletir a posição de estagiários e usuários dentro da oficina e problematizar a melhor maneira de trabalhar quando tratamos de sujeitos constituídos pela foraclusão. A forma de trabalhar o sofrimento mental também é discutida a partir da clínica ampliada, que coloca a doença entre parênteses para enxergar o sujeito. A criação de uma oficina, destinada a sujeitos constituídos pela foraclusão, trabalha com a hipótese de reestruturação psíquica através da criação artística. Funcionaria como delírio para a saída do desmoronamento foraclusivo e na diminuição do gozoOutro. Considera-se a dimensão da enunciação, sempre atenta ao surgimento de significantes, com o objetivo de dar maior suporte aos usuários da instituição. O Dispositivo Oficina seria o lugar onde se realizaria esta importante forma de subjetivação.

Increase on incineration capacity and NOx control for air enrichment in the experimental simulation of aqueous residue incineration

An experimental investigation of air enrichment in a combustion chamber designed to incinerate aqueous residues is presented. Diesel fuel and liquefied petroleum gas (LPG) were used independently as fuels. An increase of 85% in the incineration capacity was obtained with nearly 50% O-2 in the oxidant gas, in comparison to incineration with air only. The incineration capacity continues increasing for enrichment levels above 50% O-2 , although at a lower pace. For complete oxy-flame combustion (100% O-2 ), the increase of the incineration capacity was about 110% relative to the starting conditions and about 13.5% relative to the condition with 50% O-2 . The CO concentration measured near the flame front decreases drastically with the increase of O-2 content in the oxidant gas. At the chamber exit, the CO concentration was always near zero, indicating that the chamber residence time was sufficient to complete fuel oxidation in any test setting. For diesel fuel, the NOx was entirely formed in the first region of the combustion chamber. For diesel fuel, there was some increase in the NOx concentration up to 35% of O-2 ; this increase became very sharp after that. From 60 ppm, at operation with air only, the NOx concentration raises to 200 ppm at 35% O-2 , and then to 2900 ppm at 74% O-2 . The latter corresponds to six times more NOx in terms of the ratio of mass of NO to mass of residue, compared to the situation of combustion with air only. For LPG, the NOx concentrations reached 4200 ppm at 80% O-2 , corresponding to nine times more, also in terms of the ratio of mass of NO to mass of residue, in comparison with combustion with air only. Results of different techniques used to control the NOx emission during air enrichment are discussed: (a) variation of the recirculated zone intensity, (b) increase of the spray Sauter mean diameter, (c) fuel staging, (d) oxidizer staging, and (e) ammonia injection. The present paper shows that NOx emission may be controlled without damage of the increase of incineration capacity by the enrichment and with low emission of partial oxidation pollutants such as CO.

Factors contributing to the differences in peritonitis rates between centers and regions

Despite improvements in connectology, peritoneal dialysis (PD) - associated peritonitis contributes significantly to morbidity and modality failure in patients maintained on PD therapy. A broad spectrum of organisms -gram-positive, gram-negative, fungal, anaerobic - are involved in this complication. In addition, a significant percentage of episodes involve polymicrobial and culture-negative infection. Technological advances are being developed to minimize the incidence of access-related complications such as peritonitis. Many traditional factors such as exit-site infection and poor technique have been already identified. In the present review, we discuss the geographic, patient selection, and clinical issues that can affect peritonitis rates in different areas of the world and in different centers in the same area.

Synthesis by the polymeric precursor method and characterization of undoped and Sn, Cr and V-doped ZrTiO4

In this work, zirconium titanate doped with 0. 1, 0.2, and 0.4 mole% of tin, chromium and vanadium was synthesized by the polymeric precursors method and characterized by thermal analysis (TG/DTA), X-ray diffraction (XRD), nitrogen adsorption and scanning electronic microscopy (SEM). The powder presented two mass losses attributed to the exit of water and to the pyrolysis of the organic material. The surface area reduction observed from 500 degrees C indicates the beginning of the sintering process. All the dopants led to changes in the lattice parameters and to the decrease of both crystallite size and particle size. (c) 2005 Elsevier B.V. All rights reserved.

Interactions of indole acetic acid with EGF and FSH in the culture of ovine preantral follicles

The mechanisms that regulate the gradual exit of ovarian follicles from the non-growing, primordial pool are very poorly understood. The objective of this study was to evaluate the effects of adding indole acetic acid (IAA), epidermal growth factor (EGF) and follicle stimulating hormone (FSH) to the media for in vitro culture of ovine ovarian fragments and determine their effects on growth activation and viability of preantral follicles. The ovarian cortex was divided into small fragments; one fragment was immediately fixed in Bouin (control). The other fragments were cultured for 2 or 6 days in culture plates with: minimum essential medium (MEM) supplemented with insulin-transferrin-selenium (ITS), pyruvate, glutamine, hypoxantine, bovine serum albumine and antibiotics (MEM+); MEM+ plus IAA (40 ng/mL); MEM+ plus EGF (100 ng/mL); MEM+ plus FSH (100 ng/mL); MEM+ plus IAA + EGF; MEM+ plus IAA + FSH; MEM+ plus EGF + FSH; or MEM+ plus IAA + EGF + FSH. After 2 or 6 days of culture in each treatment, the pieces of ovarian cortex were fixed in Bonin for histological examination. Follicles were classified as primordial or developing (primary and secondary) follicles. Compared to the control, in all media tested, the percentages of primordial follicles were reduced (P < 0.05) and the percentages of developing follicles were increased (P < 0.05) after 2 or 6 days of culture. Furthermore, culture of ovarian cortex for 6 days reduced the percentages of healthy, viable follicles when compared with the control (P < 0.05), except for cultures supplemented with IAA + EGF and EGF + FSH. In conclusion, the addition of IAA and EGF or EGF and FSH to the culture media were the most effective treatments to sustain the health and viability of activated ovine primordial follicles during in vitro culture. (c) 2005 Elsevier B.V. All rights reserved.

Theoretical study on the reaction mechanism of VO2+ with propyne in gas phase

Possible molecular mechanisms of the gas-phase ion/molecule reaction of VO2+ in its lowest singlet and triplet states ((1)A(1)/(3)A '') with propyne have been investigated theoretically by density functional theory (DFT) methods. The geometries, energetic values, and bonding features of all stationary and intersystem crossing points involved in the five different reaction pathways (paths 1-5), in both high-spin (triplet) and low-spin (singlet) surfaces, are reported and analyzed. The oxidation reaction starts by a hydrogen transfer from propyne molecule to the vanadyl complex, followed by oxygen migration to the hydrocarbon moiety. A hydride transfer process to the vanadium atom opens four different reaction courses, paths 1-4, while path 5 arises from a hydrogen transfer process to the hydroxyl group. Five crossing points between high- and low-spin states are found: one of them takes place before the first branching point, while the others occur along path 1. Four different exit channels are found: elimination of hydrogen molecule to yield propynaldehyde and VO+ ((1)Sigma/(3)Sigma); formation of propynaldehyde and the moiety V-(OH2)(+); and two elimination processes of water molecule to yield cationic products, Prod-fc(+) and Prod-dc(+) where the vanadium atom adopts a four- and di-coordinate structure, respectively.

Experimental aspects of partially premixed pulsating combustion

The pulsating combustion process has won interest in current research due to indications that its application in energy generation can offer several advantages, such as: fuel economy, reduced pollutants formation, increased rate of convective heat transfer and reduced investment, when compared with conventional techniques. An experimental study has been conducted with the objective of investigating the effects of combustion driven acoustic oscillations in the emission rates of combustion gases, especially carbon monoxide and nitrogen oxides. The experiments were conducted in a water-jacketed 1-m long by 25-cm internal diameter stainless steel vertical tube. The combustor operated with liquefied petroleum gas (LPG) in both oscillatory and non oscillatory conditions, under the same input conditions. Part of the reactant mixture was excited acoustically, before the burner exit, by a speaker positioned strategically. The burner was aligned with the chamber longitudinal axis and positioned at its bottom. The experiments were conducted for 0.16 g/s of LPG burning in stoichiometric equivalence ratio. The main conclusions were: a) the pulsating combustion process produces more uniform fuel/air profile than the non pulsating process, b) close to stoichiometric equivalence ratio the pulsating combustion process generates higher rates of NO x; c) the frequency has a strong influence in NO x emission, but the pressure amplitude has a weak influence; d) the presence of the acoustic field may change drastically the combustion gas emissions in diffusion flames, but in pre-mixed flames the influence is not as strong.

The influence of the flame structure on the combustion oscillations in a cylindrical chamber

An experimental study has been conducted with the objective of investigating the effects of the flame structure in the combustion oscillation conditions into a laboratorial scale cylindrical chamber. The experiments were conducted in a water-jacketed 1-m long by 25-cm internal diameter stainless steel vertical tube. The combustor operated with liquefied petroleum gas (LPG) in both oscillatory and non oscillatory conditions, under the same input conditions. Part of the reactant mixture was excited acoustically, before the burner exit, by a speaker positioned strategically. The burner was aligned with the chamber longitudinal axis and positioned at its bottom. The experiments were conducted for 0.16 g/s of LPG burning in stoichiometric equivalence ratio. To analyze the flame structure the image tomographic reconstruction process were used, and the resultant images were associated to the oscillatory conditions (frequency and amplitude) into the combustion chamber. The main conclusions were: 1) when the flame premixed condition increase, for example 60% of the total air flow rate is premixed with LPG, the region of intense energy released is close to burner exit and strong amplitudes of oscillation (close to 50 mbar) were obtained into the chamber; 2) for long flames, predominantly diffusive flames, just weak amplitudes were detected, in the spite of the speaker exiting the premixed flow; 3) when the energy is released distributed through the combustion chamber, the long flame acts like a baffle. Copyright © 2006 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

Avaliação energética de um sistema de refrigeração por absorção utilizando gás de aterro e gás natural

The current technological development made by the absorption refrigeration system is an economic and ambient alternative in comparison to the vapor cycle, possessing an advantage that uses thermal energy that is less noble. Chillers of absorption are used widely in the air conditioned industries, because they can be set in motion through hot water vapors that burn natural gas, solar energy, biomasses amongst others instead of electricity. These systems allow it to reduce the tips of electric demand and balance the rocking of energy demand. This work has had a main objective to simulate a absorption refrigeration cycle with lithium-water bromide solution using biogas of sanitary landfill, and mixtures of this with natural gas. These results shown to the energy viability of the system burning biogas and its mixtures with natural gas in the generator, when compared with equipments that uses traditional fuels (natural gas, oil diesel, amongst others), for operation the commercial chillers with 15 kW of the refrigeration capacity and temperature of the water in the entrance of 14°C and the exit of 7°C.

Estimativa da exigência hídrica do amendoim usando um modelo agrometeorológico

In the experimental area of the Department of Environmental Sciences (21.85° S; 48.43° W; 786 m), in the School of Agronomical Sciences, UNESP, Botucatu, SP, an experiment was carried out using peanut (Arachis hypogaea L), cv. IAC-TATU-ST, to quantify the crop daily water requirements. During the peanut crop cycle, the environmental variables, such as rainfall, air temperature, air relative humidity, soil matric potential, soil heat flux and radiation balance, have been registered continually. These measurements were used to calculate the daily crop evapotranspiration, by the Bowen ratio method. The water replacement required by the peanut crop was done the dripping irrigation system, oriented by a dynamic agrometeorological model that computes the entrance and exit of water in the soil. During the peanut crop cycle, 9.0 mm of water was used from sowing to emergence; 67.0 mm of water, in the growth stage; 166.0 mm, in the flowering stage; 124.0 mm in the final stage and 46.0 mm from physiological maturity to harvest. Oot of 412.0 mm of the total consumption, 246.0 mm of water was supplied by irrigation and 166.0 mm by the rain. The grain yield was 3.15 t ha-1 for 15% of humidity, and the water use efficiency was 0.764 kg m-3.

Análise comparativa do ambiente de aviários de postura com diferentes sistemas de acondicionamento

Poulty house typology and the materials used (mainly for roofing) are the determining factors for an appropriate thermal condition aiming at production. In this context, the main point of this paper was to identify differences in the internal environment of two poultry houses, using monitoring and afterwards using statistics for comparing the environmental variables. The data analyzed did not show evidence of better thermal comfort for the house which was covered with ceramic roofing tile, because this house did not have ridged vents, making the hot air exit from the house difficult by the chimney effect. The ammonia concentration measured inside both houses was within the comfort limit. The temperature and humidity index of the house covered with ceramic roofing tiles was higher than the house which was covered with cement asbestos roofing tile, even though lower temperature on the tiles' surfaces was verified, showing the positive effects of the use of ridge vents at the housing. Based on the results obtained it is recommended for the Bastos, SP region, that poulty houses should be built with the ridge vent and long eaves beyond the roof of ceramic tiles.

Bilateral lower second molar impaction in teenagers: An emergent problem

The frequency of simultaneously impacted second and third molars in teenagers is increasing and becoming a common occurrence in adolescent oral surgery practice. The traditional treatment is the removal of the third molar by conventional access but repositioning of the surgical flap to the distal face of the first molar can predispose to complications such as pericoronitis and delayed healing of the attached gingiva. We present a case in which we use the germectomy approach to remove the impacted third molar for the eruption of the second molar through a vestibular incision. This incision offers excellent bone exposure and exit route for the third molar without disturbing the gingiva attached architecture on the distal face of the first molar providing good healing environment.

Mau Funcionamento do Sistema de Circulação Extracorpórea: Relato de Caso

Background and objectives: The introduction of extracorporeal circulation in clinical practice was decisive for the development of modern cardiovascular surgery. Addition of new procedures and equipment, however, brings inherent risks and complications. The objective of this report is to describe a malfunction of the oxygenation system and emphasize the importance of the interaction among the medical team members to prevent errors and complications. Case Report: During valve replacement and IVC correction surgery, we observed a darker shade of red in the blood on the exit of the oxygenator. Laboratory tests demonstrated severe acidosis and hypoxemia. The entire system was evaluated, but the cause of the malfunction was not found. Measures to reduce damage were successfully instituted. After the surgery, the whole system underwent technical evaluation. Conclusions: Interaction among the medical team members, early diagnosis, and immediate intervention were fundamental for a favorable outcome. © 2011 Elsevier Editora Ltda.

Composição Química e Características Fermentativas de Silagens de Cana-de-Açúcar Contendo Farelo de Babaçu

The objective of this trial was to evaluate the effect of babassu meal addition on chemical composition and fermentative characteristics of sugar cane silages. The addition of three concentrations of babassu meal (0; 15 and 30% in fresh matter) was evaluated in a completely randomized design with four replicates. As experimental silos 12 plastic buckets were used, provided with filter closing to allow the exit of fermentation gases. After 45 days, the silos were opened and samples were taken for the determination of dry matter (MS), crude protein (PB), neutral and acid detergent fibers (FDN, FDA) and hemicelluloses (Hem) content, pH values, total acidity quantification (ATT), losses by gases (PG) and effluents (PE). The addition of babassu meal increased the MS contents (38.4% e 40.6%), PB (7.8 e 8.9%), FDN (68.8% e 70.9%) and FDA (43.0% and 45.1%), respectively, with the addition of 15 and 30% of the by-product. The pH values, averaged 4.4, were not affected by the addition of babassu meal. The percentage of ATT increased 89.2%. PG and PE were reduced in 44.8 and 58.8%, respectively. The addition of babassu meal have contributed to the improvement of fermentative parameters and the concentration of CP in the sugar cane silages. However, its use as additive becomes limited due to the increase in fiber content that provides to the silages, depreciating its nutritive value.

O rio Paraguai no megaleque do Nabileque, sudoeste do Pantanal mato-grossense, MS

The Nabileque fluvial fan is a Quaternary depositional system located along the southwestern border of the Pantanal, covering an area of approximately 9,100 km 2. It is a peculiar alluvial system because it is not associated with inflow from adjacent plateaus. The Nabileque megafan is formed by the Paraguay River at the exit of the Pantanal wetland, coalescing with the Pilcomayo megafan of the Chaco basin. A geomorphological zonation analysis was performed making use of remote sensing data with field verification. Most of the area is a vast alluvial plain made of Pleistocene deposits, whose surface is marked by the presence of an intricate network of distributary paleochannels. Areas blanketed by Pleistocene deposits are dissected by erosional streams and subject to frequent flooding events. The Paraguay River flows in a meander belt constrained by NE fractures associated with the Transbrasiliano Lineament, but deflects towards the SSE after the Negro River confluence composing the system's peripheral drainage. An abandoned meander belt is preserved within a remarkable N-S incised-valley that is interpreted as the ancient Paraguay River course. Processes of avulsion and river capture are suggested to explain the observed changes of the river course. The Nabileque River is an underfit stream within the incised-valley, cutting paleomeanders and point bars of the previous Paraguay River course.