Desenvolvimento de um sistema para o pré-processamento da cama de frangos de corte destinada a biodigestão anaeróbia e compostagem in-vessel

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Phosphorus reduction by sifting fish waste meal

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The influence of cage farming on infection of the corvine fish Plagioscion squamosissimus (Perciformes: Sciaenidae) with metacercariae of Austrodiplostomum compactum (Digenea: Diplostomidae) from the Chavantes reservoir, Sao Paulo State, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise da viabilidade do uso de biogás gerado a partir de dejetos bovinos em microturbinas para fins de geração, cogeração e trigeração de energia

The use of digesters has become an important alternative for the proper disposal of organic agricultural wastes, serving as a solution to some environmental and health problems. Furthermore, the process of digestion provides commercially valuable by products such as biogas and bio fertilizer. The generation of biogas from agricultural waste, and its use in power generation systems has aroused great interest in rural areas because it enables supply in whole or in large part the energy demand of ownership by reducing production costs. The advent of technology has brought new forms of energy conversion of biogas, as the use of micro turbines specifies to be fuelled with biogas derived from the decomposition of organic matter in digesters, since it has a low level of methane in its composition, and high degree of impurities such as hydrogen sulphide, which are harmful to equipment and reduce the calorific value of biogas. The use of micro turbines behind other advantages like low emissions, great fuel flexibility and low maintenance. This paper presents an analysis of the feasibility of using biogas generated from cattle manure in micro turbines to generate electricity. Behind also an assessment of the energy potential that each animal has on various uses of biogas, and forms of energy recovery from the exhaust gases of the micro turbine. Also conducts an evaluation of the energy savings that the use of biogas aggregates properties.

Construction and demolition waste as a source of PVC for recycling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eutrofização e qualidade da água na piscicultura: consequências e recomendações

The eutrophication (cultural or anthropogenic) is induced by man and can have different origins, such as domestic sewage, industrial and agricultural activities, including the effluent still breeding systems of aquatic organisms. The expansion of aquaculture, with production of biomass and increase of nutrients in water may cause acceleration of productivity of algae, changing the ecology of aquatic systems. In addition, these waste water may present a risk to health through the transfer of pathogens from manure, plant residues, composted material, among others that are major sources of organic waste in some farming systems. Depending on the trophic level of fish ponds, which are dynamic environments, different planktonic species with short reproductive cycle and adapted to the changes contained in these systems can appear in high abundance. Water quality in the systems for raising fish is related to several factors, such as water source, management (liming, fertilizing, cleaning), cultivated species and quantity and composition of exogenous food. In order to minimize environmental impacts, there are techniques to improve the quality of water in fish farming systems and thus satisfactory answers can be obtained through the application of management practices. This paper aims to review the subject that deals with changes in water quality resulting from the activity of freshwater fish culture in Brazil. Search also recommend techniques of good management practices to minimize the impact generated by the activity.

Níveis de irrigação e de composto de lixo orgânico na formação de mudas cítricas em casa de vegetação

O presente trabalho visou a estudar o efeito da associação entre a irrigação e tipos de substratos na formação de mudas de laranjeira. O delineamento experimental utilizado foi o de blocos casualizados, com parcelas subdivididas, com quatro repetições, três níveis de irrigação e cinco tipos de substratos. Foram utilizados os seguintes substratos: 100% de casca de pínus; 80% de casca de pinus + 20% de composto de lixo orgânico; 60% de casca de pinus + 40% de composto de lixo orgânico; 20% de casca de pinus + 80% de composto de lixo orgânico, e 100% de composto de lixo orgânico. A irrigação por gotejamento foi feita com lâminas de 50%, 100% e 150% da evaporação do atmômetro modificado. A avaliação do desenvolvimento das plantas foi feita quinzenalmente, medindo-se o diâmetro do caule e a altura. Os resultados mostraram que as mudas de citrus apresentaram necessidade de água variável com os diferentes estádios de desenvolvimento e tipos de substratos, dos quais se destacou o substrato 3 (60% de casca de pinus e 40% de composto de lixo urbano), pois propiciou melhores condições para o desenvolvimento das raízes das plantas e também forneceu nutrientes, por meio da decomposição do material orgânico. A irrigação 3 (150% da evaporação do atmômetro) foi a que proporcionou o melhor desenvolvimento das mudas de laranjeira.

Desenvolvimento do feijoeiro sob o uso de biofertilizante e adubação mineral

A produção intensiva de alimentos exige manejo adequado do solo para garantir a produtividade e a sustentabilidade ambiental. Uma das alternativas é a utilização de resíduos orgânicos no desenvolvimento das culturas, diminuindo a dependência de adubos minerais. Com o objetivo de avaliar o desenvolvimento da cultura de feijão (Phaseolus vulgaris L.), utilizando biofertilizante e adubação mineral, conduziu-se o experimento com seis tratamentos dispostos ao acaso, em esquema fatorial, em quatro blocos, com parcelas de 8,0 x 5,0 m. Os tratamentos sob solo cultivado com a cultura de feijão caracterizaram-se como: com e sem biofertilizante (CB e SB, respectivamente) e para a adubação mineral foram utilizadas a dose recomendada no plantio, ½ dose de adubação e sem adubação mineral (AM, 1/2AM, SAM). Adotaram-se práticas culturais convencionais para o preparo inicial do solo, e em seguida foi efetuada a aplicação de biofertilizante de origem bovina na dosagem de 100 m³ ha-1, com antecedência de três meses da semeadura. Foram avaliados os parâmetros massa da matéria seca acumulada na parte aérea da planta, área foliar e produtividade da cultura. Os resultados mostraram semelhanças entre as características analisadas, obtendo-se melhor desenvolvimento à cultura que recebeu biofertilizante.

Efeito do sombreamento e do substrato sobre a germinação e o crescimento de plântulas de Acacia mangium e Acacia mearnsii

The speed and uniform germination of seeds, followed by the prompt seedling emergence, are highly desirable characteristics in seedling production. Studies aiming to enable the use of organic waste such as sewage sludge and pine bark in the supply chain represent a current demand. The aim of this study was to identify conditions of shading and substrate which are more favorable to the process of seed germination and seedling growth of Acacia mangium and Acacia mearnsii. After overcoming dormancy in hot water, the seeds were sown in three substrates: substrate plantmax commercial forest (control), pine bark and pine bark mixed with biosolids (1:1). The tubes were placed in a tree nursery under three shading conditions: 50%, 30% and 0% (full sun). The evaluated parameters were: speed and germination percentage (daily until 30 days) and shoot length of seedlings (weekly from 75 to 150 days). The experiment was a completely randomized design with treatments in a factorial 3 x 3 and the results were submitted to regression analysis. The highest germination was obtained in the sowing of Acacia mangium in pine bark at 30% shading and commercial substrate at 30 and 50% shading for Acacia mearnsii in pine bark under 50% shading or commercial substrate in full sun. For both species, seedlings grew faster and reached larger size in the final substrate of pine bark with biosolids and in any condition of shading (30 e 50 %) and full sun, anticipating the production of seedlings.

Panels Produced from Thermoplastic Composites Reinforced with Peach Palm Fibers for Use in the Civil Construction and Furniture Industry

In order to cooperate in minimizing the problems of the current and growing volume of waste, this work aim at the production of panels made from industrial waste -thermoplastic (polypropylene; polyethylene and acrylonitrile butadiene styrene) reinforced with agro-industrial waste - peach palm waste (shells and sheaths). The properties of the panels like density, thickness swelling, water absorption and moisture content were evaluated using the ASTM D1037; EN 317; and ANSI A208.1 standards regarding particle boards. Good results were obtained with formulations of 100% plastic waste; 70% waste plastics and 30% peach palm waste; and 60% waste plastics and 40% peach palm waste.

Electricity, hot water and cold water production from biomass. Energetic and economical analysis of the compact system of cogeneration run with woodgas from a small downdraft gasifier

Wood gasification technologies to convert the biomass into fuel gas stand out. on the other hand, producing electrical energy from stationary engine is widely spread, and its application in rural communities where the electrical network doesn't exist is very required. The recovery of exhaust gases (engine) is a possibility that makes the system attractive when compared with the same components used to obtain individual heat such as electric power. This paper presents an energetic alternative to adapt a fixed bed gasifier with a compact cogeneration system in order to cover electrical and thermal demands in a rural area and showing an energy solution for small social communities using renewable fuels. Therefore, an energetic and economical analysis from a cogeneration system producing electric energy, hot and cold water, using wooden gas as fuel from a small-sized gasifier was calculated. The energy balance that includes the energy efficiency (electric generation as well as hot and cold water system; performance coefficient and the heat exchanger, among other items), was calculated. Considering the annual interest rates and the amortization periods, the costs of production of electrical energy, hot and cold water were calculated, taking into account the investment, the operation and the maintenance cost of the equipments. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.

On the performance of a dual-mode non-linear vibration energy harvesting device

The research trend for harvesting energy from the ambient vibration sources has moved from using a linear resonant generator to a non-linear generator in order to improve on the performance of a linear generator; for example, the relatively small bandwidth, intolerance to mistune and the suitability of the device for low-frequency applications. This article presents experimental results to illustrate the dynamic behaviour of a dual-mode non-linear energy-harvesting device operating in hardening and bi-stable modes under harmonic excitation. The device is able to change from one mode to another by altering the negative magnetic stiffness by adjusting the separation gap between the magnets and the iron core. Results for the device operating in both modes are presented. They show that there is a larger bandwidth for the device operating in the hardening mode compared to the equivalent linear device. However, the maximum power transfer theory is less applicable for the hardening mode due to occurrence of the maximum power at different frequencies, which depends on the non-linearity and the damping in the system. The results for the bi-stable mode show that the device is insensitive to a range of excitation frequencies depending upon the input level, damping and non-linearity.

Review on the main differences between organic and conventional plant-based foods

P>The present review reports on the main characteristics and properties of plants cultivated following organic and conventional procedures, in the attempt to clarify give a deeper insight into some possible differences and to compare the two cultivation procedures. Here, we summarise research results regarding nutritional and safety properties of vegetable foods, evidencing qualitative differences observed between the two cultivation methods. It appears that the intake of organic foods leads to some advantages, such as the ingestion of a higher content of phenolic compounds and some vitamins, such as vitamin C, and a lower content of nitrates and pesticides. From literature, it appears that a special care should be taken about the ingestion of foods in relation to the content of some substances, e.g. polyamines, substances stimulating cellular division, because some foods coming from organic origin present a higher content of these compounds, which could explain some of the effect of the diet on patients affected by certain syndromes.

Corantes têxteis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Energy efficiency for standard penetration tests

The need for standardization of the measured blow count number N-spt into a normalized reference energy value is now fully recognized. The present paper extends the existing theoretical approach using the wave propagation theory as framework and introduces an analysis for large displacements enabling the influence of rod length in the measured N-spt values to be quantified. The study is based on both calibration chamber and field tests. Energy measurements are monitored in two different positions: below the anvil and above the sampler. Both experimental and numerical results demonstrate that whereas the energy delivered into the rod stem is expressed as a ratio of the theoretical free-fall energy of the hammer, the effective sampler energy is a function of the hammer height of fall, sampler permanent penetration, and weight of both hammer and rods. Influence of rod length is twofold and produces opposite effects: wave energy losses increase with increasing rod length and in a long rod composition the gain in potential energy from rod weight is significant and may partially compensate measured energy losses. Based on this revised approach, an analytical solution is proposed to calculate the energy delivered to the sampler and efficiency coefficients are suggested to account for energy losses during the energy transference process.