Progesterone-based estrous synchronization protocols in non-suckled and suckled primiparous Bos indicus beef cows

In Experiment 1, effects of an intravaginal progesterone insert (CIDR) for synchronization of estrus in non-suckled cycling primiparous Bos indicus beef cows were evaluated. Cows received either no treatment (Control), prostaglandin F(2 alpha) (PGF), or CIDR (6 d)+prostaglandin F(2 alpha) (CIDR+PGF). There were greater (P<0.05) percentages of cows inseminated and pregnant in 4 d of breeding season in CIDR+PGF (81.6%; 48.7%) than in PGF (53.8%; 32.5%) and Control cows (14.6%; 8.5%). In Experiment 2, efficacy of a treatment with CIDR (6 d)+prostaglandin F(2 alpha)+48 h temporary weaning (CIDR+PGF+TW) associated or not with equine chorionic gonadotropin (eCG) for synchronization of estrus in suckled primiparous B. indicus beef cows was evaluated. Cows were assigned to receive either no treatment (Control), CIDR+PGF+TW, CIDR+PGF+TW+200 IU of eCG, or CIDR+PGF+IW+400 IU of eCG. There were greater (P<0.05) percentages of insemination and pregnancy in 4 d of breeding season in treatment groups (47.0%; 27.5%) than in Control cows(4.5%; 3.0%) and in cows treated with eCG (50.9%; 29.4%) than in cows treated only with CIDR+PGF+TW (39.4%: 23.7%). No effects of eCG dosage were detected. The percentage of cows inseminated and pregnant in a 30 d breeding season were greater (P<0.05) in cows assigned to synchronization treatments (53.3%; 37.2%) than in Control cows (35.3%; 21.4%). In the beginning of the BS, non-suckled primiparous cows treated with CIDR+PGF with estrous cycles having been initiated following calving had greater estrous detection and pregnancy rates than PGF and Control cows, and suckled primiparous cows had improved estrous detection and pregnancy rates when eCG was associated with CIDR+PGF+TW. (C) 2009 Elsevier B.V. All rights reserved.

Fixed-time artificial insemination with estradiol and progesterone for Bos indicus cows I: Basis for development of protocols

Five experiments were conducted on commercial farms in Brazil aiming to develop a fixed-time artificial insemination (TAI) protocol that achieved pregnancy rates between 40% and 55% in Bos indicus cows. These studies resulted in the development of the following protocol: insertion of all intravaginal device containing 1.9 g of progesterone (CIDR) plus 2.0 mg im estradiol benzoate on Day 0; 12.5 mg im dinoprost tromethamine on Day 7 in cycling cows or oil Day 9 in anestrous cows; CIDR withdrawal plus 0.5 mg im estradiol cypionate plus temporary calf removal on Day 9; TAI (48 h after CIDR withdrawal) plus reuniting of calves with their dams on Day 11. Reduced dose of prostaglandin F(2 alpha) (PGF(2 alpha): 12.5 mg im dinoprost tromethamine) effectively caused luteolysis. In cycling cows, fertility was greater when the treatment with PGF(2 alpha) was administered on Day 7 than oil Day 9, but in anestrous cows, no effects of time of the PGF(2 alpha) treatment were found. Estradiol cypionate effectively replaced estradiol benzoate or gonadotropin-releasing hormone as the ovulatory stimulus, reducing labor and cost. In this protocol, CIDR inserts were successfully used four times (9 d each use) with no detrimental effects on fertility. (C) 2009 Elsevier B.V. All rights reserved.

Comparison of progesterone-based protocols with gonadotropin-releasing hormone or estradiol benzoate for timed artificial insemination or embryo transfer in lactating dairy cows

The objective was to compare two protocols for synchronizing ovulation in lactating Holstein cows submitted to timed AI (TAI) or timed ET (TET). Within each farm (n = 8), cows (n = 883; mean +/- SEM 166.24 +/- 3.27 d postpartum, yielding 36.8 +/- 0.34 kg of milk/d) were randomly assigned to receive either: 1) an intravaginal progesterone insert (CIDR (R)) with 1.9 g of progesterone + GnRH on Day -10, CIDR (R) withdrawal + PGF2 alpha on Day -3, and 1 mg estradiol cypionate on Day -2 (treatment GP-P-E; n(TAI) = 180; n(TET) = 260); or 2) a CIDR (R) insert + 2 mg estradiol benzoate on Day -10, PGF2 alpha on Day -3, CIDR (R) withdrawal + 1 mg estradiol cypionate on Day -2 (treatment EP-P-E; n(TAI) = 174; n(TET) = 269). Cows were subsequently randomly assigned to receive either TAT on Day 0 or TET on Day 7. Serum progesterone concentration on Day -3 was greater in GP-P-E than in EP-P-E (2.89 +/- 0.15 vs 2.29 +/- 0.15 ng/mL; P < 0.01), with no significant effect of group on serum progesterone on Day 7. Compared to cows submitted to TAI, those submitted to TET had greater pregnancy rates on Day 28 (44.0% [233/5291 vs 29.7% [105/354]; p < 0.001) and on Day 60 (37.6% [199/529] vs 26.5 [94/354]; P < 0.001). However, there were no effects of treatments (GP-P-E vs EP-P-E; P > 0.10) on synchronization (87.0% [383/440] vs 85.3% [378/443]), conception (TAI: 35.3% [55/156] vs 33.8% [50/148]; TET: 50.7% [115/227] vs 51.3% [118/230]) and pregnancy rates on Days 28 (TAT: 30.5% [55/180] vs 28.7% 150/174]; TET: 44.2% [115/260] vs 43.9% [118/2691) and 60 (TAI: 27.2% [49/80] vs 25.9% [45/174]; TET: 38.8% [101/260] vs 36.4% [98/269]). In conclusion, GP-P-E increased serum progesterone concentrations on Day -3, but rates of synchronization, conception, and pregnancy were not significantly different between cows submitted to GP-P-E and EP-P-E protocols, regardless of whether they were inseminated or received an embryo. (c) 2011 Elsevier B.V. All rights reserved.

Development of estrous synchronization protocols using melengestrol acetate in Bos indicus cattle

Five experiments were conducted on commercial farms in Brazil designed to develop the basis for an estrus synchronization protocol using melengestrol acetate (MGA) in Bos indicus cattle. These studies resulted in the development of the following protocol: 0.5 mg.d(-1) of MGA between d -14 and -1; 2.0 mg i.m. injection of estradiol cypionate on d -9; 48 h temporary weaning between d 0 and 2; and natural service beginning on d 0. The basis of this protocol was to induce estrous cyclicity before postpartum loss of body condition, prevent premature luteolysis, eliminate the need for labor required to detect estrus, and consequently increase the likelihood of pregnancy early during the postpartum period. This treatment effectively induced estrous cyclicity among anestrous cows, synchronized estrus activity, and prevented premature luteolysis with no negative effect on pregnancy.

Semen cryopreservation protocols of Mangalarga Marchador stallions

The effect of the utilization of three semen protocols (Inra 82®, Merck Gema and Botu-crio®) and two filling techniques (0.25 and 0.50 mL straws) in Mangalarga Marchador stallions were studied in this experiment. Sperm parameters were assessed during processing and post-freezing. No interactions between the protocols and type of filling were observed, so they were assessed separately. Sperm parameters were not altered when the extender was added to the centrifugation; however, there was reduction of motility and strength when freezing extenders were added. The Botu-crio® protocol preserved the parameters of total and progressive sperm motility, smoothed path velocity (µm/s), straight line velocity (µm/s), track velocity (µm/s) and the average and fast spermatozoa percentage better than the others. No difference between the extenders for the percentage of sperm integrity was observed. There was no difference in the responses studied on the filling techniques. The stallions presented better freezing with the use of the Botu-crio® protocol. The best post-freezing viability results were found for semen frozen using the Botu-crio® protocol and there were no differences concerning the sperm quality comparing 0.25 and 0.50 mL straws.

Biomechanical Evaluation of Platform Switching in Different Implant Protocols: Computed Tomography-Based Three-Dimensional Finite Element Analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Clinical and radiographic changes around dental implants inserted in different levels in relation to the crestal bone, under different restoration protocols, in the dog model

Background: The aim of the present study was to evaluate clinical and radiographic changes that occur around dental implants inserted in different levels in relation to crestal bone under different restoration protocols.Methods: Thirty-six implants were inserted in the edentulous mandible of six mongrel dogs. Each implant was assigned to an experimental group according to the distance from the top of the implant to the crestal bone: Bone Level (at crestal bone level), Minus 1 (1 mm below crestal bone), or Minus 2 (2 mm below crestal bone). Each hemimandible was submitted to a restoration protocol: conventional (prosthesis was installed 120 days after implant placement, including 30 days with healing cap) or immediate (prosthesis was installed 24 hours after implant placement). Fixed partial prostheses were installed bilaterally in the same day. After 90 days, clinical and radiographic parameters were evaluated.Results: As long as the implants were inserted in more apical positions, the first bone-to-implant contact (fBIC) was positioned more apically (P<0.05). However, the apical positioning of the implants did not influence the ridge loss or the position of the soft tissue margin (PSTM) (P>0.05). In addition, in immediately restored sites, the PSTM was located significantly more coronally than that in conventionally restored sites (P=0.02).Conclusions: Despite the more apical positioning of the fBIC, the height of the peri-implant soft tissues and ridge was not jeopardized. Moreover, the immediate restoration protocol was beneficial to the maintenance of the PSTM. Further studies are suggested to evaluate the significance of these results in longer healing periods.

Postoperative periodontal pain prevention using two dexamethasone medication protocols: A double-blind, parallel-group, placebo-controlled randomized clinical trial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Persistence of endodontic methacrylate-based cement residues on dentin adhesive surface treated with different chemical removal protocols

The aim of this study was to evaluate the persistence of methacrylate-based cement residues on the dentin, after dentin surface cleaning with ethanol or acetone, with or without previous application of a dentin adhesive. Forty bovine crown fragments were obtained and the dentin surface was washed with 1.0 mL of 2.5% sodium hypochlorite (NaOCl), followed by 0.1 mL of 17% ethylenediaminetetraacetic acid application for 3 min, and final irrigation with 2.5% NaOCl. The specimens were air dried and resin-based cement was rubbed onto the dentine surface with a microbrush applicator. In 20 specimens, previously to cement, a dentin adhesive was applied in all surfaces. After 15 min, the surface was scrubbed with a cotton pellet and moistened with ethanol or acetone, compounding the following groups: G199.5% ethanol and G2acetone, without previous use of dentin adhesive; G399.5% ethanol and G4acetone, with previous use of dentin adhesive. The dentin surface was scrubbed until the cement residues could not be visually detected. Sections were then processed for scanning electron microscopy and evaluated at 500x magnification and scores were attributed to each image according to the area covered by residual sealer, and data were subjected to KruskalWallis at 5% significance. The lower residue presence was observed in G3 (P = 0.005). All surface presented cement residues when acetone was used as cleaning solution (P = 0.0005). The cleaning solutions were unable to completely remove the cement residues from both surfaces. The ethanol used after previous application of the dentin adhesive promoted the lower presence of residues.

Persistence of resinous cement residues in dentin treated with different chemical removal protocols

The aim of this study was to evaluate the persistence of resin cement residues after dentin surface cleaning with different alcohol-based solutions or an essential oil (eucalyptol). Forty bovine teeth were sectioned in order to expose pulp chamber dentin to be washed with 1.0 mL of 2.5% sodium hypochlorite (NaOCl), followed by 0.1 mL of 17% EDTA application for 3 min, and final irrigation with 2.5% NaOCl. The specimens were air dried and resin-based cement was rubbed onto the dentine surface with a microbrush applicator. After 15 min, the surface was scrubbed with a cotton pellet and moistened with different dentin cleaning solutions, compounding the following groups: G195% ethanol, G270% ethanol, G370% isopropyl alcohol, or G4eucalyptol. The dentin was scrubbed until the cement residues could not be visually detected. Sections were then processed for SEM and evaluated at x 500 magnification. Scores were attributed to each image according to the area covered by residual sealer, and data were subjected to KruskalWallis at 5% significance. Eucalyptol promoted the most adequate dentin cleaning, although no statistical difference was detected amongst the groups (P > 0.05), except between the eucalyptol and 70% ethanol groups (P < 0.05). All the evaluated dentin cleaning solutions were unable to completely remove the cement residues from the dentin surface. Microsc. Res. Tech., 2012. (C) 2012 Wiley Periodicals, Inc.