Técnicas multivariadas na determinação da diversidade genética em gergelim usando marcadores RAPD

O objetivo deste trabalho foi comparar diferentes técnicas multivariadas na caracterização de 35 genótipos de gergelim mediante 769 marcadores RAPD. As distâncias genéticas foram obtidas pelo complemento aritmético do coeficiente de Jaccard e agrupadas pelos métodos hierárquicos do vizinho mais próximo, do vizinho mais distante, das médias aritméticas não ponderadas (UPGMA), do método de otimização de Tocher e análises de coordenadas principais. O agrupamento dos genótipos foi alterado em função dos diferentes métodos usados. Adotando-se a mesma distância genética (0,36) como valor de corte, diferenciaram-se quatro grupos no método do vizinho mais próximo, 13 para o vizinho mais distante, 11 no UPGMA e quatro no Tocher. Entre os métodos hierárquicos, o UPGMA apresentou o melhor ajuste das distâncias originais e estimadas (CCC = 0,89). As análises das coordenadas principais confirmaram a baixa diversidade existente entre os genótipos. A maior divergência ocorreu entre as cultivares Seridó 1 e Arawaca 4, e a menor, entre os genótipos VCR-101 e GP-3314. As três primeiras coordenadas principais contabilizaram 35,13% do total da variabilidade, e 18 autovalores foram necessários para explicar 81% da variação genética. Os métodos UPGMA, de otimização de Tocher, e as análises de coordenadas principais são complementares na formação dos grupos.

Discalculia do desenvolvimento: avaliação da representação numérica pela ZAREKI-R

O presente estudo investigou aspectos da representação numérica (processamento numérico e cálculo) e memória operacional de crianças com transtornos de aprendizagem. Participaram 30 crianças de idade entre 9 e 10 anos, ambos os gêneros, divididas em dois grupos: sem dificuldade em aritmética (SDA; N=11) e com dificuldade em aritmética (CDA; N=19), avaliadas pela ZAREKI-R, Matrizes Coloridas de Raven, o Blocos de Corsi e o BCPR. Crianças CDA exibiram escores levemente mais baixos que as SDA quanto ao nível intelectual e nos Blocos de Corsi. Na ZAREKI-R apresentaram prejuízo nos subtestes ditado de números, cálculo mental, problemas aritméticos e total. Crianças CDA apresentaram déficits específicos em memória operacional visuoespacial e comprometimento em processamento numérico e cálculo, compatível com discalculia do desenvolvimento.

Utilização de redes neurais artificiais para a determinação do número de refeições diárias de um restaurante universitário

OBJETIVO: Construir uma rede neural artificial para auxiliar os gestores de restaurantes universitários na previsão de refeições diárias. MÉTODOS: O estudo foi desenvolvido a partir do levantamento de oito variáveis que influenciam o número de refeições diárias servidas no restaurante universitário. Utiliza-se o algoritmo de treinamento Backpropagation. Os resultados por meio da rede são comparados com os da série estudada e com resultados da estimação por média aritmética simples. RESULTADOS: A rede proposta acompanha as inúmeras alterações que ocorrem no número de refeições diárias do restaurante universitário. em 73% dos dias analisados, o método das redes neurais artificiais apresenta uma taxa de acerto maior do que o método da média aritmética simples. CONCLUSÃO: A rede neural artificial mostrou-se mais adequada para a previsão do número de refeições do que a metodologia de média simples ou quando a decisão do número de refeições é feita de forma subjetiva, sem critérios científicos.

PHYLOGENETIC STUDIES OF SOME SPECIES OF THE GENUS COFFEA .1. NUMERICAL-ANALYSIS OF FLAVONOID COMPOUNDS

Flavonoid compounds were analyzed in ripe fruit pulp of ten species of Coffea, including two cultivars of C. arabica and two of C. canephora. Three coefficients of similarity: Simple-Matching, Jaccard and Ochiai and three different clustering methods, Single Linkage, Complete Linkage and Unweighted Pair Group, Using Arithmetic Averages (UPGMA), were used to analyze the data.Jaccard and Ochiai's coefficients of association showed a more coherent result, when compared with taxonomic and hybridization studies. Inclusion of Psilanthopsis kapakata in the genus Coffea, as C. kapakata, is justified by the similarity of this species with other studied species, and clusters clearly approximate the species C. arabica and C. eugenioides. The latter is one of the possible parents of the allotetraploid species C. arabica, C. congensis is the only species whose position remains ambiguous, probably due to the fact that the plants of this species that were introduced into the Campinas collections, were hybrids and not typical of C. congensis.

PHYLOGENETIC STUDIES OF SOME SPECIES OF THE GENUS COFFEA .2. NUMERICAL-ANALYSIS OF ISOENZYMATIC DATA

Thirteen species of Coffea were studied for five enzymes systems, including alpha and beta esterase, alkaline phosphatase, acid phosphatase, malate dehydrogenase and acid dehydrogenase. Three coefficients of similarity: Simple Matching, Jaccard and Ochiai and three different clustering methods: Single Linkage, Complete Linkage and Unweighted Pair Group, using Arithmetic Averages (UPGMA) were used to analyse the data.The phylogenetic relationships among the twelve diploid species and between them and the tetraploid species C. arabica showed that similarity among species of the same subsection is not always greater than among species of different subsections. In addition, although there are several similarity groups in common, established by isoenzymatic polymorphism, morphological characteristics, chemical data, crossability and geographic distribution, there is no common trend among the phylogenetic relationships as indicated by all these different evaluating procedures.

HIERARCHICAL VERSUS NONHIERARCHICAL PATTERNS OF GENETIC DISTANCES AMONG POPULATIONS - A SIMULATION STUDY

A simulation study was made of the effects of mixing two evolutionary forces (natural selection and random genetic drift), combined in a single data matrix of gene frequencies, on the resulting genetic distances among populations. Twenty-one, kinds of simulated gene frequencies surfaces, for 15 populations linearly distributed over geographic space, were used to construct 21 data matrices, combining different proportions of two types of surfaces (gradients and random surfaces). These matrices were analysed by Unweighted Pair-Group Method - Arithmetic Averages (UPGMA), clustering and Principal Coordinate Analysis. The results obtained show that ordination is more accurate than UPGMA in revealing the spatial patterns in the genetic distances, in comparison with results obtained using the Mantel test comparing directly genetic and geographic distances.

Genetic diversity of Stryphnodendron adstringens (Mart.) Coville determined by AFLP molecular markers

Bark extracts of Stryphnodendron adstringens (Mart) Coville a Leguminosae species, well known in Brazil as barbatimao, are popularly used as healing agent. The objective of this work was to determine the genetic diversity of S. adstringens populations and to correlate genetic distances to the production of tannins. S. adstringens accessions from populations found in Cerrado regions in the states of Goias, Minas Gerais and São Paulo were analyzed using the AFLP (Amplified Fragment Length Polymorphism) technique. A total of 236 polymorphic bands were scored and higher proportion of genetic diversity was found inter populations (70.9%), rather than intra populations (29.1%). F-ST value was found to be significantly greater than zero (0.2906), demonstrating the complex genetic structure of S. adstringens populations. Accessions collected in Cristalina, GO, showed higher percentage of polymorphic loci (87.3%) and the highest genetic diversity. The lowest genetic variability was detected among accessions from the population growing in Caldas Novas, GO. The genetic distance among populations was estimated using the Unweighted Pair Group Method with Arithmetic Mean (UPGMA), which grouped populations into 3 clusters. Moreover, chemotypes with tannin concentration above 40% showed higher genetic similarity. AFLP analysis proved to be an efficient gene mapping technique to determine the genetic diversity among remaining populations of S. adstringens. Obtained results may be employed to implement further strategies for the conservation of this medicinal plant. (C) 2011 Elsevier Ltd. All rights reserved.

Genetic data of 15 autosomal STR loci: an analysis of the Araraquara population colonization (São Paulo, Brazil)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Balanço de radiação em cultivos de feijão-vagem com e sem cobertura de polietileno

The radiation budget in agricultural crops is very important on the microclimate characterization, on the water losses determination and on dry matter accumulation of vegetation. This work describes the radiation budget determination in a green beans crop (Phaseolus vulgaris L.), in Botucatu, SP, Brazil (22° 54′S; 48° 27′W; 850 m), under two different conditions: the normal field culture and in a polyethylene greenhouse. The densities of fluxes of radiation were used to construct diurnal curves of the components of global radiation (Rg), reflected radiation (Rr), net radiation (Rn).The arithmetic's relations allowed to obtain the components net short-waves (Rc) and net long-waves (Rl). The analysis of these components related to the leaf area index (LAI) in many phenological phases of the culture showed Rg distributed in 68%, 85%, 17% and 66%, 76%, 10% to Rn, Rc and Rl in the internal and external ambients in a polyethylene greenhouse, respectively.

Genetic divergence in Eucalyptus spp. clones by molecular RAPD markers

The genetic divergence in 20 Eucalyptus spp. clones was evaluated by multivariate techniques based on 167 RAPD markers, of which 155 were polymorphic and 12 monomorphic. The measures of genetic distances were obtained by the arithmetic complement of the coefficients of Jaccard and of Sorenso-Nei and Li and evaluated by the hierarchical methods of Single Linkage clustering and Unweighted Pair Group Method with Arithmetic Mean (UPGMA). Independent of the dissimilarity coefficient, the greatest divergence was found between clones 7 and 17 and the smallest between the clones 11 and 14. Clone clustering was little influenced by the applied procedure so that, adopting the same percentage of divergence, the UPGMA identified two groups less for the coefficient of Sorenso-Nei and Li. The clones evidenced considerable genetic divergence, which is partly associated to the origin of the study material. The clusters formed by the UPGMA clustering algorithm associated to the arithmetic complement of Jaccard were most consistent.

Variable speed refrigeration system with HPF input rectifier stage

This paper is based on the analysis and implementation of a new drive system applied to refrigeration systems, complying with the restrictions imposed by the IEC standards (Harmonic/Flicker/EMI-Electromagnetic Interference restrictions), in order to obtain high efficiency, high power factor, reduced harmonic distortion in the input current and reduced electromagnetic interference, with excellent performance in temperature control of a refrigeration prototype system (automatic control, precision and high dynamic response). The proposal is replace the single-phase motor by a three-phase motor, in the conventional refrigeration system. In this way, a proper control technique can be applied, using a closed-loop (feedback control), that will allow an accurate adjustment of the desirable temperature. The proposed refrigeration prototype uses a 0.5Hp three-phase motor and an open (Belt-Drive) Bitzer IY type compressor. The input rectifier stage's features include the reduction in the input current ripple, the reduction in the output voltage ripple, the use of low stress devices, low volume for the EMI input filter, high input power factor (PF), and low total harmonic distortion (THD) in the input current, in compliance with the IEC61000-3-2 standards. The digital controller for the output three-phase inverter stage has been developed using a conventional voltage-frequency control (scalar V/f control), and a simplified stator oriented Vector control, in order to verify the feasibility and performance of the proposed digital controls for continuous temperature control applied at the refrigerator prototype. ©2008 IEEE.

A true programmable HPF hybrid three-phase rectifier

In this paper is proposed and analyzed a digital hysteresis modulation using a FPGA (Field Programmable Gate Array) device and VHDL (Hardware Description Language), applied at a hybrid three-phase rectifier with almost unitary input power factor, composed by parallel SEPIC controlled single-phase rectifiers connected to each leg of a standard 6-pulses uncontrolled diode rectifier. The digital control allows a programmable THD (Total Harmonic Distortion) at the input currents, and it makes possible that the power rating of the switching-mode converters, connected in parallel, can be a small fraction of the total average output power, in order to obtain a compact converter, reduced input current THD and almost unitary input power factor. The proposed digital control, using a FPGA device and VHDL, offers an important flexibility for the associated control technique, in order to obtain a programmable PFC (Power Factor Correction) hybrid three-phase rectifier, in agreement with the international standards (IEC, and IEEE), which impose limits for the THD of the AC (Alternate Current) line input currents. Finally, the proposed control strategy is verified through experimental results from an implemented prototype. ©2008 IEEE.

Comparative analysis of human and bovine teeth: Radiographic density

Since bovine teeth have been used as substitutes for human teeth in in vitro dental studies, the aim of this study was to compare the radiographic density of bovine teeth with that of human teeth to evaluate their usability for radiographic studies. Thirty bovine and twenty human teeth were cut transversally in 1 millimeter-thick slices. The slices were X-rayed using a digital radiographic system and an intraoral X-ray machine at 65 kVp and 7 mA. The exposure time (0.08 s) and the target-sensor distance (40 cm) were standardized for all the radiographs. The radiographic densities of the enamel, coronal dentin and radicular dentin of each slice were obtained separately using the histogram tool of Adobe Photoshop 7.0 software. The mean radiographic densities of the enamel, coronal dentin and radicular dentin were calculated by the arithmetic mean of the slices of each tooth. One-way ANOVA demonstrated statistically significant differences for the densities of bovine and human enamel (p < 0.05) and for bovine and human coronal dentin (p < 0.05). No statistically significant differences were found for the bovine and human radicular dentin (p > 0.05). Based on the results, the authors concluded that: a) the radiographic density of bovine enamel is significantly higher than that of human enamel; b) the radiodensity of bovine coronal dentin is statistically lower than the radiodensity of human coronal dentin; bovine radicular dentin is also less radiodense than human radicular dentin, although this difference was not statistically significant; c) bovine teeth should be used with care in radiographic in vitro studies.

HPF boost interleaved operating in discontinuous conduction mode for trolleybus application

This paper deals with results of a research and development (R&D) project in cooperation with Electric Power Distribution Company in São Paulo (Brazil) regarding the development and experimental analysis of a new concept of power drive system suitable for application in traction systems of electrical vehicles pulled by electrical motors, which can be powered by urban DC or AC distribution networks. The proposed front-end structure is composed by five boost power cells in interleaving connection, operating in discontinuous conduction mode as AC-DC converter, or as DC-DC converter, in order to provide the proper DC output voltage range required by DC or AC adjustable speed drivers. Therefore, when supplied by single-phase AC distribution networks, and operating as AC-DC converter, it is capable to provide high power factor, reduced harmonic distortion in the input current, complying with the restrictions imposed by the IEC 61000-3-4 standards resulting in significant improvements for the trolleybuses systems efficiency and for the urban distribution network costs. Considering the compliance with input current restrictions imposed by IEC 61000-3-4 standards, two digital control strategies were evaluated. The digital controller has been implemented using a low cost FPGA (XC3S200) and developed totally using a hardware description language VHDL and fixed point arithmetic. Experimental results from a 15 kW low power scale prototype operating in DC and AC conditions are presented, in order to verify the feasibility and performance of the proposed system. © 2009 IEEE.

Efeito competicional em testes de progênies de eucalipto

Many studies have recommended the use of small plots for forest experiments, although they do not consider the inter-genotype competition increase. If this competition is not isolated from the mathematics model, it can lead to incorrect selection of genetic materials. The aim of this work was to evaluate the effect of seven competition covariates in two Eucalyptus spp. progeny tests. Data from the two half-sib eucalyptus progenies were analyzed, using the randomized blocks design. The seven analyzed covariates were HegyI's competition index (IC), self-competition (AT), alo competition (AL), self-competition mean (MAT), alo competition mean (MAL), and arithmetic means of four (M4) and eight (M8) nearest neighbors. Individual and combined analyses of covariates were used for the wood volume trait. All the variance components and the changes caused by covariates use were evaluated. The competition affects the results of eucalypt progeny analysis in different ways, according to its type, self or alo competition. Most influential covariates were MAT, MAL and IC. Most promising results of competition effects reduction were observed for the IC/MAT covariates inclusion in eucalypt progeny tests.