Influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures

The objective of the present study was to analyze the influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures. The experimental plots were arranged in a pasture area in the district of Porto Esperidião (Mato Grosso, Brazil). In all of the treatments, the applications contained the herbicides aminopyralid and fluroxypyr (Dominum) at the dose of 2.5 L c.p. ha-1, including the adjuvant mineral oil (Joint Oil) at the dose of 1.0 L and a tracer to determine the deposition by high-performance liquid chromatography (HPLC) (rhodamine at a concentration of 0.6%). The experiment consisted of nine treatments that comprised the combinations of three spray volumes (20, 30 and 50 L ha-1) and three flight heights (10, 30 and 40 m). The results showed that, on average, there was a tendency for larger deposits for the smallest flight heights, with a significant difference between the heights of 10 and 40 m. There was no significant difference among the deposits obtained with the different spray mixture volumes.

Influence of seasonal changes in daily activity and annual life cycle of Geotrigona mombuca (Hymenoptera, Apidae) in a Cerrado habitat, São Paulo, Brazil

The foraging activity of Geotrigona mombuca Smith, 1863 was studied under natural conditions aiming to verify the influence of seasonal changes on daily flight activity and annual cycle of the colony. Daily flight activity was monitored for a year based on the observation and counting of foragers leaving and entering the hive, as well as the kind of material transported and meteorological factors such as day time, temperature and relative humidity. The influence of seasonal changes was evidenced by alterations on daily rhythm of flight activity and by differences on transportation of food resources, building material and garbage. These data indicate that forager behavior is related to daily microclimate conditions and it is synchronized with the requirements of colony annual cycle, which determines an intense pollen collection in the summer. Thus, the recomposition of the intranidal population in spring and summer can be ensured, which is characterized both for a higher intensity of flight activity and increase in garbage and resin transport, as well as the swarming process in the spring. In this way, an action targeting the preservation or management of the species in a natural environment should consider that survival and reproduction of the colony depends greatly on the amount of available pollen in late winter.

Efeito da endogamia em Cotesia flavipes (Cameron, 1891) (Hymenoptera: Braconidae) criada em Diatraea saccharalis (Fabricius, 1794) (Lepidoptera Crambidae) ao longo de gerações

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Análise estrutural de Tie-Rod pelo método dos elementos finitos e através de cálculos analíticos

Currently one of the great concerns of the aeronautical industry is in relation to the security and integrity of the aircraft and its equipments / components when under critical flight maneuvers such as during landing / takeoff and emergency maneuvers. The engineers, technicians and scientists are constantly developing new techniques and theories to reduce the design time and testing, ir order to minimize costs. More and more the Finite Element Method is used in the structural analysis of a project as well as theories based on experimental results. This work aimed to estimate the critical load to failure for tensile, compression and buckling of the Tie-Rod, a fixture aircraft widely used on commercial aircrafts. The analysis was performed by finite element method with the assistance of software and by analytical calculations. The results showed that the Finite Element Method provides relative accuracy and convenience in the calculations, indicating critical load values slightly lower than those found analytically for tension and compression. For buckling, the Finite Element Method indicates a critical load very similar to that found analytically following empirical theories, while Euler's theory results in a slightly higher value. The highest risk is to fail by buckling, but the geometric irregularity of Tie-Rod pieces makes difficult the calculations, therefore a practical test must be done before validation of the results

Caracterização microestrutural de uma estrutura tubular aeronáutica submetida a sucessivos reparos de solda TIG

This work examines the possible effects of successive repair procedures on the microstructure of welded steel SAE 4130 by TIG welding process. Discussions and results were made about the metallographic analysis , non-metallic inclusions and microhardness tests , which were conducted on samples taken from the cradle engine component after the end of its life , a model airplane T-27 Tucano , made by EMBRAER and belonging were performed FAB . The choice of such component is due to the fact that this is critical to flight safety since it provides support for the aircraft engine . Thus regions of the weld metal , base metal and heat affected , with samples of the original weld bead , free of weld bead and also with four rework procedures for TIG welding zone were analyzed . It was found that after the fourth rework there is an increase in the amount of martensite , which may weaken the material with respect to resistance to fatigue. It was also found that the regions of the heat affected zone and weld metal have higher microhardness values when compared to those found in the base metal due to favoring the formation of ferritic and tempered martensite microstructures . Moreover, a welding process promotes a region with less non-metallic inclusions than metal base , which also explains the difference in the results obtained

Uso de redes neurais com adaptação de pesos por modos deslizantes para controle de sistemas e aplicações em máquinas elétricas

Pós-graduação em Engenharia Elétrica - FEIS

A realidade virtual na humanidade atual

Virtual Reality it's present in our personal and professional daily life. Currently it comes been tested in many parameters. An example is, as an intervention mode related to healthy and rehabilitation field ( since phobias to physical problems ) due to dynamic interactive between human being and virtual reality, was able to be designed by a hardware and software integrated system. His appearance was in 1950s, through NASA's flight simulators in order to train astronauts in epoch (TORI et al.,2006).Subsequently, this began to expand to entertainment industry, where due to consumerism, only increasing his capacity to become so much more realist and reliable with the real environment. Because of this, beyond of your capacity be accessible which is low-cost, was used in scientific researches (motor area, physical aptitudes, cognitive, health, among others). The projected interactivity in this system type, in general, seek act according to people answers about the elements of virtual reality. Using the capacity that the reality is able to act of integrated way for human being. Following these concepts about virtual reality, the present study of literature revision, it comes as an purpose see humanity development. Since its birth, going on that point until your actuation and direct and indirect interplay in today's society from maturational form. Taking the concept of researchers' theory like Piaget. Following this line, the study will analyse how virtual reality might come to modify and act in social construction of society nowadays

A plagiotropia como procedimento de estudo relacional da criação, crítica e método de tradução de Haroldo de Campos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do ambiente no desenvolvimento de colônias iniciais de formigas cortadeiras (Atta sexdens rubropilosa)

Annually, mature colonies of Atta ants produce winged males and females, where leave the colony in which they were produced to form new colonies and thus continue the species perpetuation. The foundation of Atta spp. colonies always involves high queen effort, solely responsible for growing the fungus and the care with itself and its offspring. During the foundation there is consumption of body reserves. This study investigated how the environment influences the development of newly founded colonies of leaf cutting ant, Atta sexdens rubropilosa. Therefore, it was compared field colonies collected five months after the nuptial flight and colonies maintained in the laboratory since the nuptial flight. It was analyzed the weight and size of the population (number of workers, larvae, pupae and eggs), the workers size, the volume and weight of the fungus garden and queen effort for the nest foundation (lipid content and weight of queens). In comparison to the field colonies, the laboratory colonies showed higher values in the weight and size of population, the volume and weight of the fungus garden. Measures of workers by class size did not vary between colonies from field and laboratory. The queen effort for nest foundation was higher in field colonies, which showed a lower percentage of fat and lower weight compared to laboratory colonies. These results show that the environment has a strong influence on the colonies development during the foundation, as well as on the physiological status of the queens, and therefore the survival, development and success of the colony, it is a reflection of the queen efforts and of the environment conditions.

Células-combustível a etanol direto embarcadas em aeronaves: estudo de utilização e recuperação de calor residual

Pós-graduação em Engenharia Mecânica - FEG

A “didática” nas peças didáticas de Bertolt Brecht: ensino em cena

Pós-graduação em Educação Escolar - FCLAR

Montagem e avaliação de um sistema de varredura a LASER embarcado em VANT

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Termofisiolofia da vespa Polybia (Trichothorax) ignobilis (Haliday, 1836) (Hymenoptera, Vespidae, Epiponini) durante a atividade de forrageamento

Many social wasps are known to use thermogenesis to warm up their flight muscles and are therefore able to forage under a broad range of ambient temperatures. However it is uncertain whether there exists a possible relation between ambient temperature and thermogenic capacity for tropical species, as we lack studies focusing on these species. Therefore, we examined the use of this mechanism in the neotropical Epiponini wasp Polybia ignobilis. More specifically, we used a thermographic camera to obtain data of the surface temperatures of three body regions (head, thorax and abdomen) of wasps during foraging activities (pre-flight, flight and post-flight) in cold [initial pe- riod of foraging activity: TAM : 15 − 20◦C] and warm [final period of foraging activity: TPM : 30 − 35◦C] conditions. Thorax temperature (Tth) was always higher than head (Th) and abdomen temperature (Tabd). In general, the lowest body temperatures were observed during the pre-flight period, while the highest values occurred upon the return of the wasps from the foraging flight. Except for the pre-flight period, Tth was always higher than Tabd, indicating that heat generated at the thorax was preferentially directed to the cephalic region. Therefore we confirmed the use of thermogenesis by a neotropical social wasp, although its magnitude was found modest compared to temperate species, which suggests a link between thermal environment and thermogenic capacity. We also showed that P. ignobilis modulates heat production as a function of ambient temperature (TA), maintaining a greater temperature difference (Tbody − TA) at cooler temperatures. Finally, we identified the cephalic region of wasps as an important route for the dissipation of the heat generated during flight