Desenvolvimento de recobrimento submicrométrico de óxido de nióbio para aplicação em tubulações de prospecção de petróleo

Pós-graduação em Engenharia Mecânica - FEG

Estudo do comportamento em fadiga de um tubo de aço microligado, grau API 5L X70

This work focuses on a study on the fatigue behavior of a microalloyed steel API 5L X70, used in pipes lines to transport oil and gas. These types of steels have excellent mechanical resistance values and ductility and therefore increased their study driven by increased demand for oil and especially natural gas, which consequently raises the need to build new pipelines to transport these products. The oil extraction units, composed of the risers (pipelines connecting the oil well to the ship), are dimensioned to remain installed for periods of 20 to 30 years in the marine environment, a hostile environment for high pressure, corrosion, low temperatures and the stresses caused by the movement of water and tides. For analysis, the S-N (stress versus number of cycles) curves were obtained from data collected from bodies-of-proof cylindrical longitudinal, transverse and that one removed from the weld area of the pipe, tested in accordance with ASTM E466. Tensile tests were performed for characterizing the mechanical properties of the samples and welded joints, concluded that the values meet the specifications of the standard API 5L. To characterize microstructural material, also metallographic analysis was made of regions of the base metal and the HAZ. The results of fatigue tests demonstrated a higher life for the specimens removed from the longitudinal direction the pipe, followed by those in the transverse direction and, finally, the welded joint. The origins of the fatigue cracks were determined by scanning electron microscopy (SEM)

Práticas de gestão da melhoria contínua e aprendizado e suas contribuições para a capacidade de inovação na indústria de construção naval do Brasil

After years of stagnation, the naval construction industry in Brazil has been experiencing a period of recovery caused by investments in the oil and gas sector and the implementation of governmental programs that aimed to regenerate it. However, efforts in learning and innovations are needed in order to reinsert the country in this activity and achieve international levels of competitiveness. Based on literature about learning processes and continuous improvement practices and their impact in the innovative and productive processes, this paper aims to identify the main tendencies, mechanisms and procedures to improve the construction and management processes in the Brazilian naval construction industry. The methodology used for the data analysis classifies obtained information from magazines and annals of congresses of the sector, according to the established analysis categories (phenomena). Such categories study information related to the productive and technological processes of the industry, the main internal and external relations of the industrial park, the management of resources and processes, policies, investments, etc. The data was collected in the period 2004-2010, and more than 500 registers that show a dominance of the investment phenomenon, especially in the increase of productive capacity, were catalogued. In addition to this, there is evidence of modernization in the manufacturing plan and the equipment, diverse forms of cooperation, implementation of human resources management practices and engineering or processes and products. Hence, a process of catching up governs and is guided by modernization and increase training in this industry.

China e a Ásia Central: petróleo, segurança e os Estados Unidos

In the last two decades, the United States have substantially increased their presence in Central Asia. Therefore their presence left China in an uncomfortable position, as China seeks to build a stable and peaceful environment in its near abroad, having under its influence all the countries of Central Asia. One of the ways used by the Chinese government to get closer to the countries of this region is through the oil. Being so, the Chinese oil companies buy rights of exploitation of oil and gas reserves in Central Asia and through this establishes and deepens friendly ties with these countries. This practice became known as oil diplomacy. This new tool of the Chinese government has a double effect: it increases the projection of the Chinese power and dilutes the American influence in the region. In other words, it displeases the United States, and in turn tries to be even more present in Central Asia. The main goal to be worked in this study is how the oil diplomacy increases Chinese influence in Central Asia and dilutes American power in the region. It also aims to explain how the United States uses its presence in Central Asia and on sea lines of communication used to transport oil to contain the Chinese expansion

Desafios tecnológicos na exploração de petróleo em águas profundas: o sistema PETROBRAS de inovação

Pós-graduação em Economia - FCLAR

Análise da resistência à fadiga de tubos de aço API 5CT N80 Tipo Q soldados via processo de indução magnética de alta frequência (HFIW)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da formação do cavaco no torneamento de superligas de níquel

Pós-graduação em Engenharia Mecânica - FEG

Caracterização de um aço microligado ao boro e tratado termicamente utilizado na fabricação de tubos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do potencial de dados polarimétricos Radarsat-2 para mapeamento de uso e cobertura da terra em trecho de faixa de dutos sobre diferentes condições geomorfológicas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Determinação da qualidade da radiografia digital aplicada às soldas de gasodutos e oleodutos terrestres e marítimos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da tenacidade CHARPY-V de um tubo de aço API 5L X70 soldado com arco submerso

This research project focused primarily on assessing the impact toughness of the weld and the base material of a steel pipe API 5L X70 submerged arc welded, used to conduct remote oil and gas (linepipes). The analysis followed strictly the Specification for Line Pipe - API 5L Standard, regarding the removal of the specimens of regions-of-proof-long section of the pipe, at 90o and 180o from the welded joint, and mechanical properties of toughness and Charpy-V, both the joint welded as the base material. Specimens of steel tube supplied by Tenaris Confab-SA were sized for tensile and Charpy-V, according to ASTM E 8M and ASTM E23, respectively. The result obtained showed that the API X70 steel tube has high Charpy-V toughness, near to each other at both 90o and 180o from the welded joint of the tube, and both higher than the weld metal. Microstructural and microhardness analysis complemented the present study

Determinação experimental da tenacidade à fratura em baixas temperaturas de tubos de aço API 5L X70

Because of the great metallurgical advances, the welded tubes by HF / ERW (High Frequency / Electrical Resistance Welding) have played a more active role in the oil and gas, gradually replacing tubes produced by other processes (UOE, SAW, and others) to deep water applications, in high and extremely low temperatures, highpressure conditions and in highly corrosive environments. However, studies have revealed that defects in the welded joints are in one of main causes of failures in pipelines. Associated with damage external and the stringent requirements of this sector, the welded joints become particularly critical for his toughness and the determination of this particular property is fundamental. This study aims to evaluate the toughness of the HF / ERW pipes in HSLA steel API X70 class, used in pipelines transport systems of gas and oil from data obtained with CTOD tests (Crack Tip Opening Displacement). The main objectives of this project are: mechanical and microstructural characterization of steels API X70 manufactured in Brazil; and evaluation of the toughness of weld process by HF / ERW steel API X70 national. After having the tests done, mechanical, chemical and metallurgical, we have the conclusion that those pipe are in agreement to API 5L 42ª edition for X70MO and the toughness behaves like the expected

Investigação experimental da tenacidade em tubos de aço API 5L X70 soldados pelo processo HF/ERW

Studies about structural integrity are very important when it desires to prevent disasters associated with flaws inherent in materials used in structural components. The welded joints in steel pipes used to conduction and distribution of oil and gas correspond to the regions most susceptible to flaw. Aiming to contribute to this research line, the present study was designed to assess experimentally the structural integrity of welded joints in steel pipes API 5L X70 used in pipeline systems. This assessment is given from tests of CTOD, whose aim is simulate in laboratory the real behaviour of crack from of his propagation on the welded joint obtained by high frequency electric resistance welding. In this case, the analyses are performed from specimens SE(B) obtained directly of steel pipe API 5L X70. The proposed methodology involves tests of CTOD at lower temperature, in order to assess the toughness of material in critical operation conditions. From performance of CTOD tests, was possible assess the toughness of welded joints in terms of quantity through CTOD parameter and in terms of quality from behaviour of curve load versus CMOD. In this study, also, sought to compare CTOD’s results obtained through rules ASTM E1820 (2008) and BS 7448 (1991). Although the two standards cited previously have adopted different parameters to calculated the value of CTOD, concluded that the values of CTOD tend to converge for a common value

Estudo do comportamento em fadiga de uma chapa de aço microligado, grau API 5L X70

In engineering, for correct designing the structural components required for cyclical stresses, it is necessary to determine a limit of resistance to fatigue, which is the maximum amplitude of the applied tension under which the fatigue failure does not occurs after a certain number cycles. The marine environment is hostile, not only by the high pressure, corrosion, but also by low temperatures. Petrol Production units, composed of the risers (pipelines connecting the oil well to the ship), are dimensioned to remain installed for periods of 20 up to 30 years, and must therefore be prepared to support various efforts, such as tidal, wind currents and everything that is related. This paper focuses on a study on the fatigue behavior of microalloyed steel, API 5L Grade X70, used to transport oil and gas by pipelines. For analysis, we obtained the curves S-N (stress vs. number of cycles) using laboratory data collected from cylindrical longitudinal and transverse specimens used in axial fatigue test in accordance with ASTM E466. The tensile tests and microhardness were performed to characterize the mechanical properties of the samples, and it was found that the values meet the specifications of the standard API 5L. To characterize microstructurally the material, it was also made a metallographic analysis of the steel under study, and the origin of the fatigue crack was investigated with the support of a scanning electron microscope (SEM).

Caracterização da sensibilidade ambiental da Baixada Santista no estado de São Paulo

This study aimed to perform the analysis and characterization of environmental sensitivity to oil from Baixada Santista in the State of São Paulo. The work was done by integrating data of physical environmet, socio-economic activities and the biological / ecological provided by the Research Group on Environmental Sensitivity to Oil Spill in the Institute of Geosciences and Exact Sciences of UNESP “Julio de Mesquita Filho” wich works in the conjunction with the Program of Human Resources Training in Geosciences and Environmental Sciences Applied to the Oil and Gas (PRH-05) of the National Petroleum Agency (ANP). Were also performed descriptive statistical analysis, based on dispersion and trend parameters, which allowed to answer questions related to environmental sensitivity index (ISL) prevalence, the predominance of the ISL by environment and the predominance of the environments of the area, thus providing an overview of Baixada Santista’s main towns about sensitivity to oil. Analyses performed in this study may also help mitigate the environmental and socioeconomic impacts and contribute to contingency plans development for Baixada Santista