Effect of light-curing units on microleakage under dental composite resins

The aim of this study was to determine the effect of two light-curing units (QTH and LED) on microleakage of Class II composite resin restorations with dentin cavosurface margins. Twenty extracted mandibular first premolars, free of caries and fractures were prepared two vertical slot cavities in the occluso-mesial and -destal surfaces (2 mm buccal-lingually, 2 mm proximal-axially and cervical limit in enamel) and divided into 4 equal groups (n = 8): GI and GII: packable posterior composite light-activated with LED and QTH, respectively; GIII and GIV: micro-hybrid composite resin light-activated with LED and QTH, respectively. The composite resins were applied following the manufacturer's instructions. After 24 h of water storage specimens were subjected to thermocycling for a total of 500 cycles at 5 and 55A degrees C and the teeth were then sealed with impermeable material. Teeth were immersed in 0.5% Basic fuchsin during 24 h at room temperature, and zero to three levels of penetration score were attributed. The Mann-Whitney and Kruskal-Wallis tests showed significant statistically similar (P > 0.05) from GI to GII and GIII to GIV, which the GII (2.750) had the highest mean scores and the GIII and GIV (0.875) had lowest mean scores. The use of different light-curing units has no influence on marginal integrity of Class II composite resin restorations and the proprieties of composite resins are important to reduce the microleakage.

Influence of the Light-Curing Unit, Storage Time and Shade of a Dental Composite Resin on the Fluorescence

The aim of this study was to determine the influence of three light-curing units, storage times and colors of the dental composite resin on the fluorescence. The specimens (diameter 10.0 +/- 0.1 mm, thickness 1.0 +/- 0.1 mm) were made using a stainless steel mold. The mold was filled with the microhybrid composite resin and a polyethylene film covered each side of the mold. After this, a glass slide was placed on the top of the mold. To standardize the top surface of the specimens a circular weight (1 kg) with an orifice to pass the light tip of the LCU was placed on the top surface and photo-activated during 40 s. Five specimens were made for each group. The groups were divided into 9 groups following the LCUs (one QTH and two LEDs), storage times (immediately after curing, 24 hours, 7 and 30 days) and colors (shades: A(2)E, A(2)D, and TC) of the composite resin. After photo-activation, the specimens were storage in artificial saliva during the storage times proposed to each group at 37 C and 100% humidity. The analysis of variance (ANOVA) and Tukey's post-hoc tests showed no significant difference between storage times (immediately, 24 hours and 30 days) (P > 0.05). The means of fluorescence had difference significant to color and light-curing unit used to all period of storage (P < 0.05). The colors had difference significant between them (shades: A2D < A2E < TC) (P < 0.05). The Ultraled (LED) and Ultralux (QTH) when used the TC shade showed higher than Radii (LED), however to A2E shade and A2D shade any difference were found (P > 0.05).

Overexpression of plant uncoupling mitochondrial protein in transgenic tobacco increases tolerance to oxidative stress

An Arabidopsis thaliana cDNA clone encoding a plant uncoupling mitochondrial protein (AtPUMP1) was overexpressed in transgenic tobacco plants. Analysis of the AtPUMP1 mRNA content in the transgenic lines, determined by Northern blot, revealed variable levels of transgene expression. Antibody probing of Western blots of mitochondrial proteins from three independent transgenic lines showed significant accumulation of AtPUMP1 in this organelle. Overproduction of AtPUMP1 in transgenic tobacco plants led to a significant increase in tolerance to oxidative stress promoted by exogenous hydrogen peroxide as compared to wild-type control plants. These results provide the first biological evidence for a role of PUMP in protection of plant cells against oxidative stress damage.

An Arabidopsis Mitochondrial Uncoupling Protein Confers Tolerance to Drought and Salt Stress in Transgenic Tobacco Plants

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Tobacco Smoke Induces Ventricular Remodeling Associated with an Increase in NADPH Oxidase Activity

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of Taurine on Cardiac Remodeling Induced by Tobacco Smoke Exposure

Background/Aims: To investigate the effect of taurine on cardiac remodeling induced by smoking. Methods: In the first step, rats were allocated into two groups: Group C (n=14): control; Group T (n=14): treated with taurine (3% in drinking water), for three months. In the second step, rats were allocated into two groups: Group ETS (n=9): rats exposed to tobacco smoke; Group ETS-T (n=9): rats exposed to tobacco smoke and treated with taurine for two months. Results: After three months, taurine presented no effects on morphological or functional variables of normal rats assessed by echocardiogram. on the other hand, after two months, ETS-T group presented higher LV wall thickness (ETS=1.30 (1.20-1.42); ETS-T=1.50 (1.40-1.50); p=0.029), E/A ratio (ETS=1.13 +/- 0.13; ETS-T=1.37 +/- 0.26; p=0.028), and isovolumetric relaxation time normalized for heart rate (ETS=53.9 +/- 4.33; ETS-T=72.5 +/- 12.0; p<0.001). The cardiac activity of the lactate dehydrogenase was higher in the ETS-T group (ETS=204 +/- 14 nmol/mg protein; ETS-T=232 +/- 12 nmol/mg protein; p<0.001). ETS-T group presented lower levels of phospholamban (ETS=1.00 +/- 0.13; ETS-T=0.82 +/- 0.06; p=0.026), phosphorylated phospholamban at Ser16 (ETS=1.00 +/- 0.14;ETS-T=0.63 +/- 0.10;p=0.003), and phosphorylated phosfolamban/phospholamban ratio (ETS=1.01 +/- 0.17; ETS-T=0.77 +/- 0.11; p=0.050). Conclusion: In normal rats, taurine produces no effects on cardiac morphological or functional variables. on the other hand, in rats exposed to cigarette smoke, taurine supplementation increases wall thickness and worsens diastolic function, associated with alterations in calcium handling protein and cardiac energy metabolism. Copyright (C) 2011 S. Karger AG, Basel

Aldosterone is not Involved in the Ventricular Remodeling Process Induced by Tobacco Smoke Exposure

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Subcellular localization of the coat protein in tobacco cells infected by cucumber mosaic virus isolated from Catharanthus roseus

Electron microscopy and immunolabelling with antiserum specific to cucumber mosaic virus coat protein were used to examine tobacco leaf cells infected by cucumber mosaic virus isolated from Catharanthus roseus (CMV-Cr). Crystalline and amorphous inclusions in the vacuoles were the most obvious cytological modifications seen. Immunogold labelling indicated that the crystalline inclusion was made up of virus particles and amorphous inclusions contained coat protein. Rows of CMV-Cr particles were found between membranes of dictyosomes, but membranous bodies and tonoplast-associated vesicles were not evident. Virus particles and/or free coat protein were easily detected in the cytoplasm by immunolabelling. No gold labelling was found within nuclei, chloroplasts and mitochondria.

Biological and molecular characterization of an isolate of Tobacco streak virus obtained from soybeans in Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Cytogenetic damage of oral mucosa by consumption of alcohol, tobacco and illicit drugs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bonding Efficacy of New Self-etching, Self-adhesive Dual-curing Resin Cements to Dental Enamel

Purpose: This study evaluated the efficacy of the union between two new self-etching self-adhesive resin cements and enamel using the microtensile bond strength test.Materials and Methods: Buccal enamel of 80 bovine teeth was submitted to finishing and polishing with metallographic paper to a refinement of #600, in order to obtain a 5-mm(2) flat area. Blocks (2 x 4 x 4 mm) of laboratory composite resin were cemented to enamel according to different protocols: (1) untreated enamel + RelyX Unicem cement (RX group); (2) untreated enamel + Bifix SE cement (BF group); (3) enamel acid etching and application of resin adhesive Single Bond + RelyX Unicem (RXA group); (4) enamel acid etching and application of resin adhesive Solobond M + Bifix SE (BFA group). After 7 days of storage in distillated water at 37 degrees C, the blocks were sectioned for obtaining microbar specimens with an adhesive area of 1 mm(2) (n = 120). Specimens were submitted to the microtensile bond strength test at a crosshead speed of 0.5 mm/min. The results (in MPa) were analyzed statistically by ANOVA and Tu key's test.Results: Enamel pre-treatment with phosphoric acid and resin adhesive (27.9 and 30.3 for RXA and BFA groups) significantly improved (p <= 0.05) the adhesion of both cements to enamel compared to the union achieved with as-polished enamel (9.9 and 6.0 for RX and BF).Conclusion: Enamel pre-treatment with acid etching and the application of resin adhesive significantly improved the bond efficacy of both luting agents compared to the union achieved with as-polished enamel.