Cementation of fiber post: influence of the cement insertion techniques on the bond strength of the fiber post-root dentin and the quality of the cement layer.

The aim of this study was to assess the influence of resin cement insertion methods on the bond strength of a fiber post to root dentin and quality of the cement layer. Forty bovine single-roots (length =16 mm) were randomly allocated into four groups, according to the cement insertion methods (N.=10): Gr1- Lentulo drill #40, Gr2- Centrix syringe, Gr3- Explorer #5, Gr4- fiber post. The root canals were prepared at 12 mm, using preparation bur # 3 of a cylinder quartz-FRC post (Aesthet post-plus, Bisco). The fiber posts were cemented using a multi-step etch-and-rinse adhesive system (All Bond 2®, Bisco) and a dual-cured resin cement (Duolink, Bisco). Each root was cut into seven samples: four samples of 1.8 mm thickness for push-out testing, and three with 0.5 mm for cement layer quality analyzing. One-way ANOVA was used for the push-out test values and the One-Way Kruskal-Wallis (P<0.05) and Dunn (10%) tests for the cement layer analyzes. ANOVA showed that the cement layer quality was affected by the cement insertion methods (P=0.0044): Gr1 (3.8 ± 1.3a), Gr2 (3.2 ± 1.3a), Gr3 (5.2 ± 1.5a,b) and Gr4 (5.2 ± 1.5b) (Dunn test), whereas the bond strength (MPa) was not affected by cement insertion methods: G1 (4.2 ± 1.3), G2 (3.2 ± 1.8), G3 (4.5 ± 0.9), G4 (3.1 ± 1.3). The fiber posts should be cemented with the assistance of the lentulo drill or centrix syringe to promote the best cement layer results.

Adhesion between fiber post and root dentin: evaluation of post surface conditioning for bond strength improvement.

The aim of this paper was to evaluate two surface conditioning methods associated with the application of adhesive on the post surface for improving the bond to resin cement. Sixty single-rooted bovine teeth were sectioned at 16 mm in length, prepared (9 mm depth), embedded in a PVC cylinder using acrylic resin, and allocated into 3 groups (N.=20) according to post surface treatment: cleaning with ethanol (control group); etching with hydrogen peroxide; etching with hydrofluoric acid. Ten posts for each group were silanized and other 10 posts were silanized and received an adhesive agent. The posts were cemented with self-adhesive resin cement (RelyX U100 resin cement). All teeth were sectioned perpendicularly to the long axis (2 mm thickness per slice), submitted to push out bond strength testing and the type of failure was recorded. The obtained data were submitted to two-way ANOVA and Turkey's test, with the level of significance set at 5%. Neither the hydrofluoric acid or hydrogen peroxide post surface treatment, nor the adhesive application, had an influence on bond strength values. The main type of failure was adhesive between cement and dentin. Etching and the application of an adhesive on the post surface did not presented a significant influence on the bond strength results for the fiber post resin cement-root dentin assembly. The cement appears to adhere very well to the fiber post surface rather than the dentin surface.

Effect of different radiopacifying agents on the physicochemical properties of white portland cement and white mineral trioxide aggregate

Introduction: The aim of this study was to evaluate the pH, calcium ion release, setting time, and solubility of white mineral trioxide aggregate (WMTA) and white Portland cement (WPC) combined with the following radiopacifying agents: bismuth oxide (BO), calcium tungstate (CT), and zirconium oxide (ZO). Methods: Fifty acrylic teeth with root-end filling material were immersed in ultrapure water for measurement of pH and calcium release (atomic absorption spectrophotometry) at 3, 24, 72, and 168 hours. For evaluation of setting time, each material was analyzed according to the American Society for Testing and Materials guidelines 266/08. The solubility test was performed according to American National Standards Institute/American Dental Association specification no. 57/2000. Solubility, setting time, and pH values were compared by using analysis of variance and Tukey test, and the values of calcium release were compared by the Kruskal-Wallis and Miller tests. The significance level was set at 5%. Results: The pH and calcium release were higher at 3 and 24 hours. WPC was the material with the higher values for both properties. WMTA had the greatest solubility among all materials (P <.05). All radiopacifiers increased the setting time of WPC, and WMTA had the shortest setting time among all materials (P < .05). Conclusions: All materials released calcium ions. Except for WPC/CT at 168 hours, all materials promoted an alkaline pH. On the basis of the obtained results, ZO and CT can be considered as potential radiopacifying agents to be used in combination with Portland cement. Copyright © 2012 American Association of Endodontists.

Pharmacokinetic and pharmacodynamic modelling of intravenous, intramuscular and subcutaneous buprenorphine in conscious cats

Objective To describe simultaneous pharmacokinetics (PK) and thermal antinociception after intravenous (IV), intramuscular (IM) and subcutaneous (SC) buprenorphine in cats. Study design Randomized, prospective, blinded, three period crossover experiment. Animals Six healthy adult cats weighing 4.1±0.5kg. Methods Buprenorphine (0.02mgkg-1) was administered IV, IM or SC. Thermal threshold (TT) testing and blood collection were conducted simultaneously at baseline and at predetermined time points up to 24hours after administration. Buprenorphine plasma concentrations were determined by liquid chromatography tandem mass spectrometry. TT was analyzed using anova (p<0.05). A pharmacokinetic-pharmacodynamic (PK-PD) model of the IV data was described using a model combining biophase equilibration and receptor association-dissociation kinetics. Results TT increased above baseline from 15 to 480minutes and at 30 and 60minutes after IV and IM administration, respectively (p<0.05). Maximum increase in TT (mean±SD) was 9.3±4.9°C at 60minutes (IV), 4.6±2.8°C at 45minutes (IM) and 1.9±1.9°C at 60minutes (SC). TT was significantly higher at 15, 60, 120 and 180minutes, and at 15, 30, 45, 60 and 120minutes after IV administration compared to IM and SC, respectively. IV and IM buprenorphine concentration-time data decreased curvilinearly. SC PK could not be modeled due to erratic absorption and disposition. IV buprenorphine disposition was similar to published data. The PK-PD model showed an onset delay mainly attributable to slow biophase equilibration (t1/2ke0=47.4minutes) and receptor binding (kon=0.011mL ng-1minute-1). Persistence of thermal antinociception was due to slow receptor dissociation (t1/2koff=18.2minutes). Conclusions and clinical relevance IV and IM data followed classical disposition and elimination in most cats. Plasma concentrations after IV administration were associated with antinociceptive effect in a PK-PD model including negative hysteresis. At the doses administered, the IV route should be preferred over the IM and SC routes when buprenorphine is administered to cats. © 2012 Association of Veterinary Anaesthetists and the American College of Veterinary Anesthesiologists.

Combining adapted Judo training and pharmacological treatment to improve bone mineral density on postmenopausal women: A two years study

Background & Study Aim: Physical activity has been an important factor to increase bone mineral density (BMD) and, consequently, to prevent and treat osteoporosis. The study aimed the effects of adapted Judo training on BMD in postmenopausal women, during pharmacological treatment. Material & Methods: Eighteen female volunteers participated in this study. They were separated into two groups: Adapted Judo training (AJT) (n=11; 52.2±5.3 years) and control group (CG) (n=7; 53.8±4.4 years). Lunar GE Dual Energy X-Ray Absorptiometry (DXA) measured BMD at lumbar L2-L4, femoral neck and trochanter sites. The training period for AJT was two years, comprised 12 mesocycles with different intensities. ANOVA compared 2 groups in 3 moments of testing and Scheffé Test allowed multiple comparisons between groups for the L2-L4 and femoral neck sites, but at trochanter was Fisher LSD. Results: ANOVA showed significant differences in the AJT group (F(2, 32)=15.187, p=0.000023). Scheffé Test showed significant increase on lumbar BMD after one year of AJT (Δ%=+8.9%, p=0.000017) and after two years this improvement stand still (p=0.33). The CG after one year presented significant decrease in BMD of femoral neck (Δ%=-6.9%, p=0.03) and trochanter (Δ%=-3.7%, p=0.0084). However, the CG recovered the loss of BMD of femoral neck (Δ%=+7.6%, p=0.02) and trochanter (Δ%=+3.8%, p=0.0079) after two years of study. Conclusions: Drug therapy, without the physical activity practice, can aid the maintenance of BMD. AJT may be considered as an efficient physical activity for postmenopausal women with low BMD in pharmacological treatment. © ARCHIVES OF BUDO | SCIENCE OF MARTIAL ARTS.

Mensuração de estratégias de estudo e aprendizagem de alunos universitários: learning and study strategies inventory (lassi) adaptação e validação para o Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of Resin Cement Type on the Microtensile Bond Strength to Lithium Disilicate Ceramic and Dentin Using Different Test Assemblies

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The association of chlorhexidine digluconate and calcium chloride to use as vehicle of a silicate calcium-based cement

Objective: The purpose of this study was to evaluate the influence of the addition of 2% chlorhexidine digluconate (CHX) associated with 5% calcium chloride (CaCl2 ) on antimicrobial activity, setting time, pH and calcium release of gray mineral trioxide aggregate (GMTA). Materials and Methods: GMTA powder was mixed with water, 2% CHX alone or 2% CHX combined with 5% CaCl2 . Antimicrobial activity was determined against Enterococcus faecalis (ATCC 29212) strains by agar diffusion test. Data obtained were submitted to kruskal wallis tests. Analysis of the setting time was evaluated by American society for testing and materials C266-03 requirements. The pH and calcium release analysis were evaluated, in 24 h, 7, 14 and 28 days using pH meter equipment and atomic absorption spectrophotometer, respectively. Data obtained were analyzed by ANOVA, in 5% significance level. Results: Significant differences were seen (P < 0.01) among the zones of bacterial growth inhibition produced by 5% CaCl2 + 2% CHX combination against E. faecalis when compared with water (P < 0.05). Regarding the setting time, that combination had the shortest setting time (P < 0.05). All associations were alkaline and released calcium. No statistical difference was observed between the experimental groups at the different periods of analysis (P > 0.05). Conclusion: Combination of 5% CaCl2 + 2% CHX reduced the setting time and enhanced the antimicrobial activity of GMTA without changing the pH and calcium release.

Effects of electroplated zinc-nickel alloy coatings on the fatigue strength of AISI 4340 high-strength steel

Recovered substrates have been extensively used in the aerospace field. Cadmium electroplating has been widely applied to promote protective coatings in aeronautical components, resulting in excellent corrosion protection combined with a good performance in cyclic loading. Ecological considerations allied to the increasing demands for corrosion resistance have resulted in the search for possible alternatives. Zinc-nickel (Zn-Ni) alloys have received considerable interest recently, because these coatings show advantages such as a good resistance to white and red rust, high plating rates, and acceptance in the market. In this study, the effect of electroplated Zn-Ni coatings on AISI 4340 high-strength steel was analyzed for rotating bending fatigue strength, corrosion, and adhesion resistance. The compressive residual stress field was measured by x-ray diffraction prior to fatigue tests. Optical microscopy documented coating thickness, adhesion characteristics, and coverage extent for nearly all substrates. Fractured fatigue specimens were investigated using scanning electron microscopy (SEM). Three different Zn-Ni coating thicknesses were tested, and comparisons with the rotating bending fatigue data from electroplated Cd specimens were performed. Experimental results differentiated the effects of the various coatings on the AISI 4340 steel behaviour when submitted to fatigue testing and the influence of coating thickness on the fatigue strength.

Remission status follow-up in children with juvenile idiopathic arthritis

Objective: To characterize articular and systemic inflammatory activity in juvenile idiopathic arthritis (JIA), identifying remission status with and without medication.Methods: A total of 165 JIA cases, followed for a mean period of 3.6 years, were reviewed in order to characterize episodes of inactivity and clinical remission on and off medication. The resulting data were analyzed by means of descriptive statistics, survival analysis, by comparison of Kaplan-Meier curves, log rank testing and binary logistic regression;analysis in order to identify predictive factors for remission or persistent activity.Results: One hundred and eight of the cases reviewed fulfilled the inclusion criteria: 57 patients (52.7%) exhibited a total of 71 episodes of inactivity, with a mean of 2.9 years per episode; 36 inactivity episodes (50.7%) resulted in clinical remission off medication, 35% of which were of the persistent oligoarticular subtype. The probability of clinical remission on medication over 2 years was 81, 82, 97 and 83% for cases of persistent oligoarticular, extended oligoarticular, polyarticular and systemicJIA, respectively. The probability of clinical remission off medication 5 years after onset of remission was 40 and 67% for patients with persistent oligoarticular and systemic JIA, respectively. Persistent disease activity was significantly associated with the use of an anti-rheumatic drug combination. Age at JIA onset was the only factor that predicted clinical remission (p = 0.002).Conclusions: In this cohort, the probability of JIA progressing to clinical remission was greater for the persistent oligoarticular and systemic subtypes, when compared with polyarticular cases.

POST-MORTEM LESIONS of UROLITHIASIS IN A LESSER SEED FINCH (Sporophila angolensis).

Urolithiasis is a disease that despite being a commonly observed problem in veterinary practice is uncommon in birds. Such disease was not reported in passeriforms to date. Accordingly, the aim of the present article is to describe a case of urolithiasis in an adult female lesser seed finch (Sporophila angolensis) pet bird which presented abdominal distension, respiratory distress, and apathy prior to death. The bird had history of being fed with a diet rich in protein. After the bird death, a necropsy was conducted in order to determine the cause of death. At necropsy, accentuated ascites, hydropericardium, and ureteral stones in the left ureter could be grossly observed. Additional tests related with viral and bacterial microbiological testing and with the determination of calculi composition could not be performed since the owner did not consent with the procedures because of the cost. Since the bird was fed on a high protein diet, a relationship between the ureteroliths and dietary imbalance was suggested with participation of protein in calculi development by providing the organic nuclei. Additionally, we conclude that the presence of calculi in the ureter resulted in urinary flow blockage, ascites, and consequent acute respiratory failure due to filling of air sacs with liquid.

Viability of primordial follicles derived from cryopreserved ovine ovarian cortex tissue

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of the effects of irradiation in osseointegrated dental implants

Objective: The purpose of the present study was to evaluate the influence of radiation in osseointegrated dental implants installed in tibiae of rats.Material and methods: Screw-shaped implants (2.5 mm diameter by 3.5 mm length) were custom made from commercially pure titanium bars. Titanium implants were blasted and sterilized before implantation. Animals were divided into two groups of 12 animals each and the rats were not paired after the groups' formation. The experimental group (group 1) received external irradiation 4 weeks after surgery while in the control group (group 2) animals were kept free of radiation. The shear strength required to detach the implant from bone was measured by push-out testing and osseointegration was histologically evaluated.Results: Results showed that the compressive strength of irradiated implants (33.49 MPa) was significantly lower than the compressive strength of non-irradiated implants (48.05 MPa).Conclusions: We concluded that the mechanical strength bonding between implants and host tissues decreased after irradiation.

Benefits of physical exercise on executive functions in older people with Parkinson's disease

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analytical Methods Employed at Quality Control of Fuel Ethanol

The existence of organic and inorganic contaminants present in both fossil and biomass fuels and the fact that they can provide undesirable effects (environmental problems, corrosion processes, lead to storage instability, and others) implies a rigorous quality control of these fuels, although these contaminants make up a small part of the final fuel composition. Considering the rising importance of fuel ethanol in the worldwide panorama, this review aims at reporting the use of successful alternative analytical methods in the monitoring of organic and inorganic contaminants at trace levels, used to determine and to quantify these substances in fuel ethanol and also presenting all official norms for quality control of fuel ethanol employed by ABNT (Brazilian Association of Technical Norms), ASTM (American Society for Testing and Materials), and ECS (European Committee for Standardization).