Permanent Magnet Hall Thruster for satellite orbit raising with low power energy consumption

Electric propulsion is now a succeful method for primary propulsion of deep space long duration missions and for geosyncronous satellite attitude control. Closed Drift Thruster, so called Hall Thruster or SPT (Stationary Plasma Thruster), was primarily conceived in USSR (the ancient Soviet Union) and, since then, it has been developed by space agencies, space research institutes and industries in several countries such as France, USA, Israel, Russian Federation and Brazil. In this work we present the main features of the Permanent Magnet Hall Thruster (PMHT) developed at the Plasma Laboratory of the University of Brasilia. The idea of using an array of permanent magnets, instead of an electromagnet, to produce a radial magnetic field inside the plasma channel of the thruster is very significant. It allows the development of a Hall Thruster with power consumption low enough to be used in small and medium size satellites. Description of a new vacuum chamber used to test the second prototype of the PMHT (PHALL II) will be given. PHALL II has an aluminum plasma chamber and is smaller with 15 cm diameter and will contain rare earth magnets. We will show plasma density and temperature space profiles inside and outside the thruster channel. Ion temperature measurements based on Doppler broadening of spectral lines and ion energy measurements are also shown. Based on the measured plasma parameters we constructed an aptitude figure of the PMHT. It contains the specific impulse, total thrust, propellant flow rate and power consumption necessary for orbit raising of satellites. Based on previous studies of geosyncronous satellite orbit positioning we perform numerical simulations of satellite orbit raising from an altitude of 700 km to 36000 km using a PMHT operating in the 100 mN - 500 mN thrust range. In order to perform these calculations integration techniques were used. The main simulation paraters were orbit raising time, fuel mass, total satellite mass, thrust and exaust velocity. We conclude comparing our results with results obtainned with known space missions performed with Hall Thrusters. © 2008 by the American Institute of Aeronautics and Astronautics, Inc.

Monoclonal Antibody Production and Immunolocalization of a Salinity Stress-Related Protein in Rice (Oryza sativa)

Among various physiological responses to salt stress, the synthesis of a lectin-related protein of 14.5 kDa was observed in rice plants (Oryza sativa L.) under the treatment of 170 mmol/L NaCl. In order to better understand the role of the SALT protein in the physiological processes involving salinity, it was immunolocalized in mesophilic cells of leaf sheath and blade of a rice variety IAC-4440 following monoclonal antibodies produced by hybridome culture technique. This variety turned out to be an excellent model for that purpose, since it accumulates SALT protein even in absence of salt treatment and it has been classified as moderately sensitive to salinity and a superior grain producer. This feature was relevant for this work since it allowed the use of plants without the deleterious effects caused by salinity. Immunocytochemistry assays revealed that the SALT protein is located in the stroma of chloroplasts under non-stressing condition. Since the chloroplast is the main target affected by salinity and considering that the SALT protein does not present any apparent signal peptide for organelle localization, its lectin-like activity seems to play an important role in the establishment of stable complexes, either to other proteins or to oligosaccharides that are translocated to the chloroplast. © 2011 China National Rice Research Institute.

Spin stabilized satellite's attitude analytical prediction

An analytical approach for spin stabilized attitude propagation is presented, considering the coupled effect of the aerodynamic torque and the gravity gradient torque. A spherical coordination system fixed in the satellite is used to locate the satellite spin axis in relation to the terrestrial equatorial system. The spin axis direction is specified by its right ascension and the declination angles and the equation of motion are described by these two angles and the magnitude of the spin velocity. An analytical averaging method is applied to obtain the mean torques over an orbital period. To compute the average components of both aerodynamic torque and the gravity gradient torque in the satellite body frame reference system, an average time in the fast varying orbit element, the mean anomaly, is utilized. Afterwards, the inclusion of such torques on the rotational motion differential equations of spin stabilized satellites yields conditions to derive an analytical solution. The pointing deviation evolution, that is, the deviation between the actual spin axis and the computed spin axis, is also availed. In order to validate the analytical approach, the theory developed has been applied for spin stabilized Brazilian satellite SCD1, which are quite appropriated for verification and comparison of the data generated and processed by the Satellite Control Center of the Brazil National Research Institute (INPE). Numerical simulations performed with data of Brazilian Satellite SCD1 show the period that the analytical solution can be used to the attitude propagation, within the dispersion range of the attitude determination system performance of Satellite Control Center of the Brazilian Research Institute.

Avaliação dos efeitos dos polissacarídeos sulfatados de macroalgas marinhas sobre a Fosfolipase A2 de Crotalus durissus terrificus

Pós-graduação em Biologia Geral e Aplicada - IBB

Análise dos compostos flavorizantes da cana-de-açúcar e otimização da aplicação de extratos ricos em β-glicosidases para liberação de aroma na produção de aguardente de cana

Pós-graduação em Química - IBILCE

Membranas de borracha natural recobertas com nanopartículas de ouro: síntese e caracterização

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação da deriva da mistura 2,4-D e glyphosate com diferentes pontas de pulverização e adjuvantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Manejo de serpentes em cativeiro: manejo clínico-sanitário e avaliação da microbiologia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sistema de informação geográfica e sensoriamento remoto na avaliação do processo de mudança de uso da terra para subsidiar o planejamento de bacias hidrográficas

Pós-graduação em Geociências e Meio Ambiente - IGCE

Estudo Farmacognóstico e Screening Biológico de Solanum lycocarpum St. Hill (Solanaceae)

Pós-graduação em Ciências Farmacêuticas - FCFAR

Previsão da velocidade dos ventos por redes neurais artificiais e arima de box & jenkins

Pós-graduação em Engenharia Elétrica - FEIS

Rainwater toxicity and contamination study from So Paulo Metropolitan Region, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise econômica do plantio e condução do eucalipto de curta rotação para fins energéticos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Classificação e mapeamento de áreas de risco de enchentes e inundações no bairro Jardim Inocoop - Rio Claro - SP

In the last few decades, Brazil has experienced an accelerated urbanization process in which many cities have grown in a disorderly way occupying environmentally fragile areas unsuitable for habitation. Anthropogenic actions such as high levels of impermeable soil, structural changes in watercourses, lack of riparian vegetation, illegal presence of trash and rubbish along the river banks added to irregular settlements in floodplains result in the rise of high risk areas. When accompanied by intense and prolonged rainfall phenomena, those areas have been the scenery of serious accidents such as floods. This study aims to classify the level of the risk of floods in the neighborhood of Jardim Inocoop, in the town of Rio Claro, São Paulo countryside, Brazil. One of the main technical support to tackle this issue is the identification and classification of the risks. In order to classify the risk level of flood in this case study, the methodology adopted was developed by the Ministry of Cities and Technology Research Institute, and take into account the arrangement of the hydrological scenario, vulnerability of households and dangerous process according to the distance of the houses from the axis of drainage. Therefore, the risk levels adopted to classify are listed below: very high (MA), high risk (A), moderate (M) and low risk (B). In conclusion, it is imperative to develop prevention plans in order to avoid or to minimize the damages caused by natural disasters. Therefore, the zoning of the risk sceneries remains as an important issue once it helps to identify the areas with high level risk of flood. Consequently, the occupation must be regulated where there is low or absent risk and it must be often forbidden where the high risk of flood is detected. Thus, the present study remains as an attempt to notify the risk of floods through its spatialization on a map, remainig...(Complete abstract click electronic access below)

Caracterização de compósitos produzidos por VARTM para aplicações aeronáuticas

In recent years the aeronautic industries has increased investment in areas of technological research aiming at materials that offer better performance, safety, weight reduction and fuel consumption. For this reason the most studied materials are polymeric materials, due to their higher mechanical strength and higher stiffness. This work evaluated characteristics of two composite laminates produced from the same process, but they differed only in regions where the resin was injected and the vacuum position. The composite laminates were SC-79 resin reinforced with glass fiber fabric (plain weave) processed via VARTM. For this reason the material was subjected to mechanical tests such as: tensile, and fatigue following standards ASTM D 3039 and ASTM D 3479, respectively. The latter was observed the S-N curve. It was performed the ultrassonic C-scan analysis to check impregnation of the fiber. Considering that the process was the same for the two laminates, with small variations in the injection and in vacum ports, it was expected to find similar characteristics