Effect of organic selenium and zinc on the performance and egg quality of Japanese quails

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determination of selenium in nutritionally relevant foods by graphite furnace atomic absorption spectrometry using arsenic as internal standard

A method has been developed for the direct determination of Se in nutritionally relevant foods by graphite furnace atomic absorption spectrometry. Tungsten/rhodium carbide coating on the integrated platform of a transversely heated graphite atomizer or W coating with co-injection of Pd(NO3)(2) were used as a permanent modifiers. Samples and reference solutions were spiked with 500 mu g L-1 As and absorbance variations due to changes in experimental conditions were minimized. For 20 mu L aqueous analytical solutions delivered into the graphite tube, analytical curves in the 5.0-40 mu g L-1 with good linear correlation were established. Pyrolysis and atomization temperatures were evaluated using pyrolysis and atomization curves, respectively. The optimized heating program (temperature, ramp time, hold time) of the graphite tube of the Perkin-Elmer SIMAA 6000 atomic absorption spectrometer was: dry steps (110 degrees C, 5 s, 10 s; 130 degrees C, 15 s, 15 s); air-assisted pyrolysis step (600 degrees C, 20 s, 40 s; 20 degrees C, 1 s, 40 s); pyrolysis step (1300 degrees C, 10 s, 20 s); atomization step (2100 degrees C, 0 s, 4 s); clean step (2550 degrees C, 1 s, 5 s). The method was applied for Se determination in coconut water, coconut milk, soybean milk, cow milk, tomato juice, mango juice, grape juice and drinking water samples and four standard reference materials and results were in agreement at 95% confidence level. The lifetime of the tube was 500 firings and the relative standard deviations of measurements of typical samples containing 25 mu gL(-1) Se were 3.0% and 6.0% (n = 12) with and without internal standardization, respectively. The limits of detection were in the 0.35 mu g L-1-0.7 mu g Se L-1 range. The accuracy of the proposed method was evaluated by an addition-recovery experiment and all recovered values were in the 98-109% range. (c) 2004 Elsevier Ltd. All rights reserved.

A hydride generation flow system for determination of arsenic and selenium by total reflection X-ray fluorescence spectrometry

In this work, a preconcentration and separation system based on continuous flow hydride generation is proposed to improve the determination of As and Se by total reflection X-ray fluorescence spectrometry. The generated hydrides are continuously separated from the liquid phase and collected in a chamber containing 250 mul of HCI/HNO3 1:1 (v/v) solution. Hydride generation conditions and collection of the hydrides were evaluated. Under optimised conditions, enrichment factors of 55 for As and 82 for Se were attained. Detection limits of 0.3 mug l(-1) for As and Se were obtained when 20 ml of sample was used. Analysis of a natural water standard reference material from National Institute of Standard and Technology (SRM-1640) was in agreement with the certified values at the 95% confidence level. (C) 2004 Elsevier B.V. All rights reserved.

Dye-sensitized solar cell architecture based on indium-tin oxide nanowires coated with titanium dioxide

A new architecture for dye-sensitized solar cells is employed, based on a nanostructured transparent conducting oxide protruding from the substrate, covered with a separate active oxide layer. The objective is to decrease electron-hole recombination. The concept was tested by growing branched indium-tin oxide nanowires on glass using pulsed laser deposition followed by deposition of a sputtered titanium dioxide layer covering the wires. The separation of charge generation and charge transport functions opens many possibilities for dye-sensitized solar cell optimization. (c) 2007 Acta Materialia. Inc. Published by Elsevier Ltd. All rights reserved.

Controlled growth of anodic aluminium oxide films with hexagonal array of nanometer-sized pores filled with textured copper nanowires

Anodic aluminium oxide (AAO) films exhibiting a homogeneous morphology of parallel pores perpendicular to the surface were prepared in a two-step anodization process and filled with copper by electrochemical deposition. The optimum growth conditions for the formation of freestanding AAO films with hexagonal compact array of cylindrical pores were studied by field emission scanning electron microscopy and small angle X-ray scattering. The results show well-defined periodic structures with uniform pores size distribution for films with pore diameters between 40 and 70 nm prepared using different voltages and temperatures during the second anodization step. X-ray photoelectron spectroscopy and X-ray diffraction analysis of AAO films filled with copper show the formation of nanowires with high structural order, exhibiting a preferential crystalline orientation along the (2 2 0) axis and only small fraction of copper oxides. The best results for textured Cu nanowires were obtained at a reduction potential of -300 mV. (C) 2009 Elsevier Ltd. All rights reserved.

A Simple Method Based on ICP-MS for Estimation of Background Levels of Arsenic, Cadmium, Copper, Manganese, Nickel, Lead, and Selenium in Blood of the Brazilian Population

Throughout the world, biomonitoring has become the standard for assessing exposure of individuals to toxic elements as well as for responding to serious environmental public health problems. However, extensive biomonitoring surveys require rapid and simple analytical methods. Thus, a simple and high-throughput method is proposed for the determination of arsenic (As), cadmium (Cd), copper (Cu), manganese (Mn), nickel (Ni), lead (Pb), and selenium (Se) in blood samples by using inductively coupled plasma-mass spectrometry (ICP-MS). Prior to analysis, 200 l of blood samples was mixed with 500 l of 10% v/v tetramethylammonium hydroxide (TMAH) solution, incubated for 10 min, and subsequently diluted to 10 ml with a solution containing 0.05% w/v ethylenediamine tetraacetic acid (EDTA) + 0.005% v/v Triton X-100. After that, samples were directly analyzed by ICP-MS (ELAN DRC II). Rhodium was selected as an internal standard with matrix-matching calibration. Method detection limits were 0.08, 0.04, 0.5, 0.09, 0.12, 0.04, and 0.1 g//L for As, Cd, Cu, Mn, Ni, Pb, and Se, respectively. Validation data are provided based on the analysis of blood samples from the trace elements inter-\comparison program operated by the Institut National de Sante Publique du Quebec, Canada. Additional validation was provided by the analysis of human blood samples by the proposed method and by using electrothermal atomic absorption spectrometry (ETAAS). The method was subsequently applied for the estimation of background metal blood values in the Brazilian population. In general, the mean concentrations of As, Cd, Cu, Mn, Ni, Pb, and Se in blood were 1.1, 0.4, 890, 9.6, 2.1, 65.4, and 89.3 g/L, respectively, and are in agreement with other global populations. Influences of age, gender, smoking habits, alcohol consumption, and geographical variation on the values were also considered. Smoking habits influenced the levels of Cd in blood. The levels of Cu, Mn, and Pb were significantly correlated with gender, whereas Cu and Pb were significantly correlated with age. There were also interesting differences in Mn and Se levels in the population living in the north of Brazil compared to the south.

Effect of processing conditions on the nucleation and growth of indium-tin-oxide nanowires made by pulsed laser ablation

Indium-tin oxide nanowires were deposited by excimer laser ablation onto catalyst-free oxidized silicon substrates at a low temperature of 500 degrees C in a nitrogen atmosphere. The nanowires have branches with spheres at the tips, indicating a vapor-liquid-solid (VLS) growth. The deposition time and pressure have a strong influence on the areal density and length of the nanowires. At the earlier stages of growth, lower pressures promote a larger number of nucleation centers. With the increase in deposition time, both the number and length of the wires increase up to an areal density of about 70 wires/mu m(2). After this point all the material arriving at the substrate is used for lengthening the existing wires and their branches. The nanowires present the single-crystalline cubic bixbyite structure of indium oxide, oriented in the [100] direction. These structures have potential applications in electrical and optical nanoscale devices.

EFFECTS of SELENIUM SUPPLEMENTATION on CATTLE ANTI-RABIES HUMORAL IMMUNE RESPONSE and LEVELS of SERUM SELENIUM and CORTISOL

This study evaluated the effect of different concentrations of selenium (Se) supplementation on cattle anti-rabies humoral immune response, serum Se concentrations and cortisol levels. Sixty uncastrated male Nelore calves from 10 to 12 months grazing on Brachiaria decumbens forage were studied. The animals were assigned to one of four groups (n = 15 each), which received non-supplemented diets (Gc) or supplemented with daily and individual Selenium ( Se) concentrations of 3.6 mg (G(3.6)), 5.4 mg (G(5.4)) or 6.4 mg (G(6.4)). The calves were immunized on day 0 with one dose of commercial liquid inactivated rabies vaccination. on days 15, 30, 60, 90 and 120, the cattle underwent the same stressing procedures used for vaccination in the corral. Cattle blood samples were collected after vaccination and stressing procedures to determine serum Se levels, rabies antibody titers and serum cortisol. Se levels were also determined in forage samples collected from the paddocks in which the cattle were held. Se concentration in B. decumbens was 0.04 mg of Se/kg dry matter. Baseline Se levels obtained on day 0 were higher in Gc than in G(5.4) and G(6.4) (P = 0.005). Serum Se levels decreased in Gc throughout the experiment (P < 0.004), increased in G(3.6) (P < 0.000) and G(5.4) (P < 0.000) and were kept high from day 60 on in group G(6.4) (P < 0.002). Rabies antibody titers did not differ among control and supplemented groups. However, 120 days after vaccination rabies antibody titers were kept above protective levels (>= 0.5 UI/mL) only in group G(3.6) (P < 0.00002), whereas they dropped in the other groups (P < 0.05). Serum cortisol levels did not differ among the experimental groups (P = 0.79), reached peak levels on day 90 and returned close to baseline levels on day 120. Se and cortisol levels were not markedly correlated. Serum cortisol and rabies antibody titers were correlated only in group G(6.4), on day 60 (R = 0.513; P = 0.05) and 120 (R = 0.644; P = 0.009). Serum Se and rabies antibody titers were correlated only in group G(6.4), on day 60 (R = -0.580; P = 0.023). In conclusion: a) the profile of Se variation is different among groups receiving different concentrations of this element; b) the supplementation dosage of 3.6 mg Se/animal/day is efficient to treat/prevent marginal Se deficiency; c) individual supplementation with daily concentrations of 3.6 mg Se enhances the maintenance of rabies antibody titers in cattle; d) individual supplementation with daily concentrations of 3.6; 5.4 and 6.4 mg Se are ineffective in reducing serum cortisol; e) repeated cattle handling in corrals stress animals that adapt to these procedures, although serum cortisol does not return to baseline levels by 120 days; and f) the stress generated by repeated management in cattle in the corral does not diminish antibody titers after vaccination against rabies.

Effect of α-tocopherol, taurine and selenium on the attenuation of ischemia/reperfusion injury of splanchnic organs

Background: Splanchnic artery occlusion shock is caused by increased capillary permeability and cellular injury precipitated by oxygen derived free radicals following ischemia and reperfusion of splanchnic organs. The purpose of this study was to assess the role of several well-known oxygen- derived free radical scavengers in ameliorating or preventing this syndrome. Study design: Anesthetized rats were subjected to periods of occlusion of the visceral arteries and reperfusion. Tocopherol, taurine, selenium or a 'cocktail' of these three agents was injected subcutaneously for 4 consecutive days prior to operation. Mean arterial blood pressure was measured throughout the experimental period. Fluorometry and technetium-99m pyrophosphate counting of the visceral organs were performed as well as a histologic grading system for intestinal viability. Results: Final mean arterial blood pressure associated with the 'cocktail' and selenium groups was 79.1 ± 27.4 mmHg and 83.6 ± 17.8 mmHg, respectively. These values were significantly higher than the control group, 40.8 ± 11.4 mmHg (P < 0.05). Similar patterns of the benefit of selenium in contrast with the other groups were obtained with fluorescein perfusion, radioisotopic activity and histologic analysis. Conclusion: Pretreatment with selenium of splanchnic ischemia and reperfusion in the rat improves mean arterial blood pressure and microcirculatory visceral perfusion. Further analysis of the precise protective mechanism of selenium for reperfusion injury will enable visceral organs to withstand the consequences of increased capillary leakage and oxidant injury.

Geogenic factors affecting the selenium(IV) distribution in sediments from Madeira River Basin, Brazil

This investigation was carried out at the Madeira River basin, located in the state of Rondônia, Brazilian Amazon. Sediments from Madeira River between Teotônio and Santo Antônio waterfalls along 25 km upstream from Porto Velho, the capital of Rondônia state, and from nine lakes located around Porto Velho municipality were chemically analyzed for Se (IV) in order to evaluate the main factors affecting the Se(IV) distribution in the environment, Selenite ion was chosen to investigate the selenium behavior in the area, because acid conditions are dominant there. The importance of clays, iron oxides, organic matter and minor refractory minerals was considered in order to explain most of the obtained data.

Strain relaxation and stress-driven interdiffusion in InAsInGaAsInP nanowires

The authors have investigated strain relaxation in InAsInGaAsInP nanowires (NW's). Transmission electron microscopy images show an additional stress field attributed to compositional modulation in the ternary layer, which disrupts NW formation and drives Ga interdiffusion into InAs, according to grazing incidence x-Ray diffraction under anomalous scattering conditions. The strain profile along the NW, however, is not significantly affected when interdiffusion is considered. Results show that the InAs NW energetic stability is preserved with the introduction of ternary buffer layer in the structure. © 2007 American Institute of Physics.

Selenium supplementation enhances weight gain in cattle

To evaluate the effect of selenium on cattle growth in a continuous grazed pasture system. Selenium was added to protein-mineral salt and given to male, around-12-month old, non-castrated Nellore calves. Animals were randomly and equally distributed into 4 groups (15 calves/group) which received supplementation containing 0, 3.6, 5.4 or 6.4 mg selenium/animal/day (groups Gc, G 3.6, G 5.4 and G 6.4, respectively). The animals were weighed on day zero and 120, and the pasture forages were collected at day 0 for chemical analyses. Weight gain was higher in cattle from G 5,4 (45.58%) than in the other groups, and higher in G 3,6 (24.97%) and G 6,4 (22.67%) than in Gc. The supplementation with 5.4 mg selenium/animal/day enhanced weight gain in cattle fed on selenium poor diet (0.04 mg Se/kg dry matter).

Lipid and selenium sources on fatty acid composition of intramuscular fat and muscle selenium concentration of Nellore steers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)