Biological control of the bronze bug, Thaumastocoris peregrinus, in eucalyptus plantations in Brazil

The bronze bug Thaumastocoris peregrinus (Hemiptera: Thaumastocoridae) was detected in Brazil in 2008 and infested >180 000 ha of eucalyptus plantations in 2011. The bronze bug can cause a reduction of 10–15% in wood productivity after 2 years of heavy infestation. Although there is not an effective control method known, biological control is the main control strategy studied. An exotic egg parasitoid, Cleruchoides noackae (Hymenoptera: Mymaridae), was imported from Australia in 2012, reared in a laboratory and released in three Brazilian regions. Parasitoids were recovered at release points after 20–30 d. In 2013, preliminary evaluations demonstrated parasitoid establishment in these areas, and the parasitoid was recovered in adjacent areas after 1 year of release. Bioassays confi rmed egg parasitism of 15–20% by C. noackae. Other native natural enemies were studied. We found green lacewing Chrysoperla externa and predatory bugs Supputius cincticeps and Atopozelus opsimus preying on nymphs and/or adults of T. peregrinus. Another promising possibility is entomopathogenic fungi. Commercial formulations of Beauveria bassiana were tested with success in lab and fi eld conditions. Fusarium proliferatum and Paecilomyces cateniannulatus caused mortality of T. peregrinus in natural epizooties. After 5 years of research, it is possible to develop an integrated pest management system (IPM) for eucalyptus plantations based on biocontrol strategy for bronze bug.

Bioatividade de derivados de Annonaceae sobre Helicoverpa armigera (Hübner, 1808) (Lepidoptera: Noctuidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Anaerobic bio-digestion of concentrate obtained in the process of ultra filtration of effluents from tilapia processing unit

The objective of the present study was to evaluate the efficiency of the process of biodigestion of the protein concentrate resulting from the ultrafiltration of the effluent from a slaughterhouse freezer of Nile tilapia. Bench digesters were used with excrements and water (control) in comparison with a mixture of cattle manure and effluent from the stages of filleting and bleeding of tilapias. The effluent obtained in the continuous process (bleeding + filleting) was the one with highest accumulated population from the 37th day, as well as greatest daily production. Gases composition did not differ between the protein concentrates, but the gas obtained with the use of the effluent from the filleting stage presented highest methane gas average (78.05%) in comparison with those obtained in the bleeding stage (69.95%) and in the continuous process (70.02%) or by the control method (68.59%).

Attractiveness of Different Citrus Pulps to the Leaf-Cutting Ant Atta sexdens rubropilosa (Hymenoptera: Formicidae)

The most common control method Uses toxic baits consisted of dehydrated citrus pulp as carrier and attractant. However, the portion of the citrus fruit that is attractive to ants is still Unknown, despite its importance in chemical control. This study compared the attractiveness of different fruit parts of citrus pulps to Atta sexdens rubropilosa workers. Three treatments: pellets of industrial citrus pulp, albedo (mesocarp), and whole citrus pulp were offered randomly to ants and the removal of these substrates by workers was observed. Tie three pulps Were equally attractive to this species (F = 0.8033; p = 0.4633). Although the whole pulp included the epicarp, it was as attractive as the other treatments, possibly because, the material was heated during processing, eliminating any volatile substance that could repel ants.

Padrões de infestação de comunidades de plantas daninhas no agroecossistema de cana-crua

Objetivou-se neste trabalho a obtenção de padrões de infestação de plantas daninhas na cultura de cana-de-açúcar com histórico de colheita mecanizada sem queima prévia da palha. Foram realizadas amostragens em 28 talhões na região de Ribeirão Preto, SP; em cada talhão foram demarcadas unidades de avaliação e coleta, na proporção de duas por hectare, que consistiram de áreas (quatro linhas de 4 metros de comprimento) mantidas sem controle de plantas daninhas e onde foram realizadas as amostragens de plantas emergidas. As amostragens foram realizadas aos 120 dias após o corte, com quadrados vazados (0,5 x 0,5 m) lançados aleatoriamente duas vezes em cada uma das unidades de avaliação e coleta. Com os dados obtidos, calculou-se a importância relativa e o índice de agregação das espécies ou grupo de espécies. Esses índices foram usados no processamento da análise de agrupamento hierárquica, utilizando como medida de semelhança a distância euclidiana e como estratégia de agrupamento o método UPGMA (Unweighted Pair-Group Method using arithmetic Averages). Foi possível distinguir quatro grupos em função da importância relativa e cinco grupos de talhões em função do índice de agregação; dentro de alguns grupos houve formação de subgrupos.

Amostragem seqüencial de Alabama argillacea (Hübner) (Lepidoptera: Noctuidae) em algodoeiro

Para implantar o manejo apropriado do curuquerê-do-algodoeiro, é necessário construir um plano de amostragem que permita estimar, de forma rápida e precisa, a densidade populacional da praga. Esta pesquisa objetivou determinar o plano de amostragem seqüencial de Alabama argillacea (Hübner) em algodoeiro, cultivar CNPA ITA-90. Os dados foram coletados no ano agrícola de 1998/99 na Fazenda Itamarati Sul S/A, localizada no município de Ponta Porã, MS, em três áreas de 10.000 m² cada. As áreas amostrais foram compostas de 100 parcelas de 100 m². O número de lagartas pequenas, médias e grandes foi determinado semanalmente em cinco plantas tomadas ao acaso por parcela. Após verificado que todos os instares das lagartas estavam distribuídos de acordo com o modelo de distribuição agregada, ajustando-se à Distribuição Binomial Negativa durante todo o período de infestação, construiu-se um plano de amostragem seqüencial de acordo com o Teste Seqüencial da Razão de Probabilidade (TSRP). Adotou-se o nível de controle de duas lagartas por planta para a construção do plano de amostragem. A análise dos dados indicou duas linhas de decisão: a superior, que representa a condição de que a adoção de um método de controle é recomendado, definida por S1= 4,8784+1,4227n; e a inferior representando que a adoção de algum método de controle não é necessário, definida por S0= -4,8784+1,4227n. A amostragem seqüencial estimou o número máximo esperado de 16 unidades amostrais para se definir a necessidade ou não do controle.

The effects of inter-crop cultivation Between rows of citrus crop on spreading of Guignardia citricarpa Ascospores and in the citrus black spot occurrence

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Controle alternativo de Colletotrichum acutatum agente causal da queda prematura dos frutos cítricos

A queda prematura dos frutos cítricos (QPFC), causada por Colletotrichum acutatum, dados os grandes prejuízos que têm causado aos produtores, constitui-se numa doença de grande importância econômica. O controle da doença é feito predominantemente mediante uso de fungicidas, que eleva o custo de produção e afeta negativamente o meio ambiente. Diante disso, este trabalho teve por objetivo buscar um método alternativo de controle da QPFC, mediante o uso de agentes de biocontrole ou de biofertilizantes. Diferentes concentrações de biofertilizantes (originários de duas fontes distintas e denominados de Bio1 e Bio 2); três isolados de Bacillus subtilis (ACB-69; 72 e 77) e três isolados de Trichoderma spp. (ACB-14; 37 e 39) foram testados, isoladamente ou em combinação, sob condições de laboratório, quanto à capacidade inibitória da germinação de conídios de C. acutatum. Estudaram-se, ainda, a produção de metabólitos termoestáveis por B. subtilis e o efeito sobre a germinação do patógeno. Quinze isolados de B. subtilis foram testados quanto à capacidade de prevenir a infecção por C. acutatum em flores destacadas de lima- ácida 'Tahiti' e, no campo, foram instalados dois experimentos, visando a testar ACBs e biofertilizantes no controle da doença. Verificou-se que o isolado ACB-72 (B. subtilis) e ACB-37 (T. pseudokoningii) foram os que mais inibiram a germinação do patógeno. Quanto à produção de metabólitos termoestáveis, ACB-69 e 77 foram os mais eficientes em produzir substâncias antifúngicas, e em quantidades suficientes para inibirem a germinação do patógeno. A mistura dos quatro isolados de Bacillus (ACBs: 69; 72; 77 e AP3) foi o que apresentou maior porcentagem de inibição (73%). Os biofertilizantes (Bio1 e Bio2), em concentrações acima de 10% e, quando em associação com isolados de Trichoderma spp., promoveram maiores inibições na germinação de C. acutatum. em testes com flores destacadas, verificou-se que, onde foram aplicados os ACBs 69; 76; 74 e 77, as porcentagens de pétalas sem sintomas de infecção por C. acutatum foram de 83; 92; 92 e 97%, respectivamente. Mediante avaliações a campo, verificou-se a potencialidade de B. subtilis e de biofertilizantes em controlar a doença.

The field resistance of potato cultivars to foliar late blight and its relationship with foliage maturity type and skin type in Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Selectivity of Workers of the Grass-Cutting Ants Atta bisphaerica and Atta capiguara (Hymenoptera: Formicidae) to Vegetable Oils

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Pole placement by coordinated tuning of Power System Stabilizers and FACTS-POD stabilizers

This work presents the application of the Decentralized Modal Control method for pole placement in multimachine power systems utilizing FACTS (Flexible AC Transmission Systems), STATCOM (Static Synchronous Compensator) and UPFC (Unified Power Flow Controller) devices. For this, these devices are equipped with supplementary damping controllers, denominated POD ( Power Oscillation Damping), achieving a coordinated project with local controllers (Power System Stabilizers - PSS). Comparative analysis on the function of damping of the FACTS, STATCOM and UPFC is performed using the New England System that has 10 generators, 39 buses and 46 transmission lines. (c) 2011 Elsevier Ltd. All rights reserved.

An Intelligent Controller Design for Magnetorheological Damper Based on a Quarter-car Model

This paper presents the control strategies of nonlinear vehicle suspension using a magnetorheological (MR) damper. We used two different approaches for modeling and control of the mechanical and electrical parts of the suspension systems with the MR damper. First, we have formulated and resolved the control problem in order to design the linear feedback dumping force controller for a nonlinear suspension system. Then the values of the control dumping force functions were transformed into electrical control signals by the application of a fuzzy logic control method. The numerical simulations were provided in order to show the effectiveness of this method for the semi-active control of the quarter-car suspension.

Manejo de brachiaria decumbens e seu reflexo no desenvolvimento de Eucalyptus grandis

A field trial was carried out in Santa Rita do Passa Quatro, SP, on sandy soil, between February 1993 to February 1995, aiming to study the effects of fertilizer doses and brachiaria grass control on the growth of E. grandis. In the field the plots (9×9 plants, spacing 2×3 m) were located following a randomized block experimental design with four repetitions. The treatments were arranged in a factorial design with four systems of brachiaria grass control in the space between the Eucalyptus rows: mowing, cultivation, chemical control with glyphosate (2,08 kg eq. ác./ha) and hand hoeing were developed when the population reached the early flowering stage and four doses of the fertilizer 20-05-20: 0, 115, 230 and 345 kg/ha, handled at 3, 6 and 12 monthes after the transplantation. The hand hoeing was the most effective method of brachiaria grass control. However the hand hoeing controlled plots showed a decrease on the E. grandis growth exhibiting slower growth rate, shorter plants, thinner stems, smaller leaf area results and reduction on dry matter accumulation than the plants from the other plots under different weed control management's. The glyphosate promoted an excellent brachiaria grass control while the E. grandis plants grow better. Both remainder weed control management systems were intermediary in terms of efficacy. The mowing management was the most similar method as compared to the hand hoeing one and the cultivation treatments to the chemical control method. The growth rate differences observed between the hand hoeing and chemical control treatments were not caused directly by late fertilizations. There were no significative interactions among the weed control systems and the fertilization doses. Considering the brachiaria grass that grew between the E. grandis rows there were detected benefits to the crop and these effects increased when the chemical control was used for weed management.

Dispersal of the delayed action insecticide sulfluramid in colonies of the leaf-cutting ant Atta sexdens rubropilosa (Hymenoptera: Formicidae)

Toxic baits are the most used control method for leaf-cutting ants due to their high effectiveness and because they are considered the safest for humans. Taking into account that the importance of leaf-cutting ants as pests, knowing the process by which dispersal and worker contamination is achieved becomes essential to understand several aspects about the functioning of a bait-borne AI (active ingredient) used in toxic baits. It has been established that an effective toxic bait should have a delayed- action AI, but its dispersion among the different sizes of workers is unknown. Workers of different sizes are involved in quite different tasks such foraging, cultivation of symbiotic macrofungus or control of deleterious microfungi. Therefore, we prepared a toxic bait containing the delayed-action AI sulfluramid and a dye (Rhodamine B) as an AI tracer in order to study dispersal and contamination in colonies, evaluated at different periods and in relation to different workers' sizes. Both field and laboratory colonies were evaluated. The great level of contamination, about 50% at 24 hours, in all sizes of workers demonstrates that worker contact with toxic bait is intense within this period. The distribution in field and laboratory colonies was similar. This contamination pattern is probably enough to cause the colony to die because of contamination of smaller workers, leading to the loss of control of the aggressive microfungi, which can quickly overgrow the symbiotic fungus culture. The dispersal dynamics of AI in leaf-cutting ant workers is important for investigations on the mode of action of this insecticide in the colony, and as a reference in future studies, such as those attempting to reduce the concentration of AIs in baits to reduce their environmental impact, or for facilitation of new AI screening.

Efficiency evaluation of ZrB2 incorporation in the MgB 2 matrix phase using high-energy milling

The present study suggests the use of high energy ball milling to mix (to dope) the phase MgB2 with the AlB2 crystalline structure compound, ZrB2, with the same C32 hexagonal structure than MgB 2, in different concentrations, enabling the maintenance of the crystalline phase structures practically unaffected and the efficient mixture with the dopant. The high energy ball milling was performed with different ball-to-powder ratios. The analysis of the transformation and formation of phases was accomplished by X-ray diffractometry (XRD), using the Rietveld method, and scanning electron microscopy. As the high energy ball milling reduced the crystallinity of the milled compounds, also reducing the size of the particles, the XRD analysis were influenced, and they could be used as comparative and control method of the milling. Aiming the recovery of crystallinity, homogenization and final phase formation, heat treatments were performed, enabling that crystalline phases, changed during milling, could be obtained again in the final product. © (2010) Trans Tech Publications.