289 resultados para Substrato e fonte de explante
Resumo:
With the objective of evaluating the progress of absorption of macro and micronutrients in cauliflower cultivated in substrate, an experiment was conducted in a greenhouse at the Universidade do Estado de São Paulo, in Jaboticabal, Brazil. The experimental desing used was randomized blocks, with six treatments and five replicates. The treatments comprised times of sampling (20; 30; 40; 50; 60 and 70 days after the transplant). The composition and accumulation of the macro and micronutrients of the shoot and root were evaluated. The biggest demand of nutrient happened in the period of 60 to 70 (DAT) for macro and micronutrients. The decreasing order of the macronutrients accumulated by the cauliflower was K, N, S, P, Mg and Ca and for micronutrients Fe, Zn, B, Mn and Cu.
Resumo:
Official rules for seed analysis don't establish criteria to execute germination tests for all species. This way, the aim of this research was to determinate the substrate, temperature and counting time for the germination test of physic nut seeds. For the germination test, four replications of 20 seeds were used, evaluating daily the normal seedlings until the end of germination. Initially, the substrates with sowing in vermiculite, were evaluated in rolled paper towels, in sand and in soil using alternating temperature of 20-30 degrees C. The most favorable substrates for germination were evaluated with another stage, using constant temperatures of 25, 30 and 35 degrees C and alternating ones, of 15-35 degrees C, 20-35 degrees C and 20-30 degrees C. One concluded that the germination test of physic nut seeds must be performed with the alternating temperature of 20-30 degrees C in sand or paper towel and with final counting 10 days after sowing.
Resumo:
Aiming to evaluate the curve of growth and dry matter accumulation in cauliflower cv. Verona in commercial substrate for vegetables Plantmax (R), an experiment was conducted in a greenhouse at UNESP, Jaboticabal, SP. The experimental design was randomized blocks with six treatments, five replicates, each plot had a plan. The treatments consisted of sampling times (20, 30, 40, 50, 60 and 70 days after transplantation). Evaluations of plant height, leaf number, stem diameter, leaf area, dry matter of shoot, root and whole plant, and fresh weight of the inflorescence. Furthermore, calculated the relative growth rate (RGR) of leaves, stems, roots, flowers and whole plant, presented in g day(-1) plant(-1). The hybrid of cauliflower 'Verona' shows initial slow growth, stepping up from 30 days after transplantation. The maximum accumulation of dry matter per plant was 87g at 70 DAT, with the participation of sheets of 53.8%, stem 9.9%, 30.7% of inflorescence and root 6.5%. The cultivation cauliflower Verona in substrate showed high accumulation of dry Inflorescence.
Resumo:
A pitaya (Hylocereus undatus) é uma cactácea propagada vegetativamente, o que resulta em pequena ou nula variabilidade nos plantios comerciais. Devido a diversos estudos mostrarem que a espécie é auto ou parcialmente incompatível, realizou-se este trabalho com o intuito de verificar a eficiência de polinização da pitaya autofecundada e utilizando-se de pólen de H. polyrhizus e Selenicereus setaceus, além da influência da época do ano e da coloração da cobertura da tela plástica na qualidade dos frutos. O experimento foi realizado na Área de Fruticultura da Faculdade de Ciências Agrárias e Veterinárias - UNESP, Campus de Jaboticabal, num delineamento experimental inteiramente casualizado, em esquema fatorial 3 X 2 X 2 (três espécies doadoras de pólen X duas colorações de cobertura de sombrite, branca e preta, com 50% de sombreamento X duas épocas do ano), com quatro repetições para cada espécie doadora de pólen, em cada uma das coberturas. As flores foram emasculadas em duas épocas (março e abril) e polinizadas manualmente. As variáveis avaliadas foram porcentagem de pegamento dos frutos, características físicas e químicas dos frutos (comprimento e diâmetro, massas total, de polpa e de casca, % de polpa, espessura da casca, pH, teor de sólidos solúveis (ºBrix), teor de vitamina C, acidez titulável, índice de maturação - ST/AT) e dias da antese até a colheita. Não houve frutificação nas flores autopolinizadas, enquanto as polinizadas com pólen de H. polyrhizus e S. setaceus obtiveram 100% de pegamento. Pode-se concluir que há necessidade de interplantio de plantas de H. undatus (clone avaliado) com H. polyrhizus ou S. setaceus para a ocorrência de frutificação, sendo que a utilização de H. polyrhizus como doadora de pólen proporciona a obtenção de frutos com maior massa e menor acidez. As condições climáticas ocorridas durante o desenvolvimento dos frutos, nas épocas estudadas, afetaram a qualidade dos frutos.
Resumo:
In germination tests, substrate and ideal temperature are important for providing favorable conditions for the germination of seeds and the eventual development of seedlings. This research aimed at evaluating the effects of temperature and substrate on the germination of Piptadenia moniliformis Benth seeds. Two trials were done. In the first, seeds were submitted to germination under constant temperatures of 5 to 40 degrees C (increases of 5 degrees C) and alternated temperatures of 20-25, 25-30, 30-35, 20-30, 25-35 and 20-35 degrees C on paper. In the second trial, temperatures of 25, 20-30 e 20-35 degrees C were used in the substrates on (OP) and between paper (BP), on (OS) and between sand (BS), on (0V) and between vermiculite (BV) and paper roll (PR). The following traits were evaluated: percentage of seeds with protrusion of primary root and normal seedlings; speed germination index; length of primary root and of the hypocotyls and the dry mass of seedlings. A completely randomized design was used with 14 treatments. In the first experiment and a factorial scheme of 7 x 3 (7 substrates and 3 temperatures) was used in the second with four replicates of 25 seeds each. In the first experiment the constant temperatures of 25 e 30 degrees C and the alternated of 20-30 e 20-35 degrees C provided best results for the germination of seeds. In the second, the temperature of 25 C associated with the substrates BP, BS and BV surpassed the other treatments proving adequate for carrying out the germination tests of Piptadenia moniliformis Benth seeds.
Resumo:
The speed and uniform germination of seeds, followed by the prompt seedling emergence, are highly desirable characteristics in seedling production. Studies aiming to enable the use of organic waste such as sewage sludge and pine bark in the supply chain represent a current demand. The aim of this study was to identify conditions of shading and substrate which are more favorable to the process of seed germination and seedling growth of Acacia mangium and Acacia mearnsii. After overcoming dormancy in hot water, the seeds were sown in three substrates: substrate plantmax commercial forest (control), pine bark and pine bark mixed with biosolids (1:1). The tubes were placed in a tree nursery under three shading conditions: 50%, 30% and 0% (full sun). The evaluated parameters were: speed and germination percentage (daily until 30 days) and shoot length of seedlings (weekly from 75 to 150 days). The experiment was a completely randomized design with treatments in a factorial 3 x 3 and the results were submitted to regression analysis. The highest germination was obtained in the sowing of Acacia mangium in pine bark at 30% shading and commercial substrate at 30 and 50% shading for Acacia mearnsii in pine bark under 50% shading or commercial substrate in full sun. For both species, seedlings grew faster and reached larger size in the final substrate of pine bark with biosolids and in any condition of shading (30 e 50 %) and full sun, anticipating the production of seedlings.
Resumo:
Vermiculite is a substrate used in seedling production of forest species and can be an option for the germination test of ipe seeds. The objective of this research was to evaluate the use of vermiculite in the germination test of Tabebuia chrysotricha seeds and to stablish appropriate particle size and moisture for this substrate. Four replications of 20 seeds were sown in soil, sand, paper rolls, and vermiculite with different particle sizes: micron (0.15-0.20 mm), superthin (0.21-0.30 mm), thin (0.30-0.50 mm) and medium (0.50-1.19 mm) moistened with water equivalent to 0.5, 1.0, 1.5 and 2.0 times the weight of the dry subtrate. Germination test was carried out at 30 degrees C. The percentage of normal seedlings was obtained seven days after sowing (first count) and then weekly until 28 days, when abnormal seedlings and dead seeds were also counted. It was concluded that the germination test of ipe seeds can be carried out with thin or medium vermiculite moistened with water equivalent to 1.5 times the dry weight of the substrate. These treatments resulted in higher and faster germination (21 days).
Resumo:
Rapid and uniform germination of seeds followed by prompt emergence are highly desirable characteristics for the production of seedlings. The aim of this study was to identify sowing positions and types of substrate most likely to the seed germination process and growth of seedlings of Schizolobium parahyba (Vell.) S.F. Blake. To germinate the seeds, they were placed in the following positions in relation to the bottom of the furrow in the substrate: hilum uppermost, hilum at the bottom, supported on one side, seed on edge with its sides parallel to the walls of the bag. Three substrates were used: commercial plantmax substrate (control), pine sawdust and sand. The substrates were fully randomized in a 4 x 3 factorial design (four seed positions and three substrates), with four replications of 20 seeds. The parameters evaluated were: the percentage of emergence, the after emergence seedling deaths, the first-count test, the emergence speed index, and the seedling aerial part length. It was concluded that all the seed positions in pine sawdust sowing offer the more favorable conditions for the germination process and seedling growth of Schizolobium parahyba.
Resumo:
Considering the reduced number of works with fertilization of Eugenia uvalha in national literature and being overcome as base the results of the research with fertilization of other fruitful ones, the present work had as objective to study the effect of nitrogen fertilization and phosphorus, in the culture of the Eugenia uvalha. The work was lead in the Department of Agriculture of the Federal University of Lavras, Lavras - MG, in the first semester of 2005. The experiment was adopted the experimental delineation of randomized blocks in factorial project 4 X 4, with four repetitions and 5 plants for parcel, having been 4 doses of phosphorus: 0 kg m(-3); 2,5 kg m(-3); 5,0 kg m(-3); 10,0 kg m(-3); using itself as seasoning source the triple superphosphate. Already for nitrogen, the applications proceeded from 10 in 10 days had been used 4 doses in covering being, had been carried through 4 applications. The applications consisted of a solution with urea, in the doses: 0; 0,8; 1,6 e 3,2 Kg m(-3), in each application had been added to the polyethylene bags, 20 mL of solution contend the N. had been evaluated the following characteristics: height of the dumb one (cm); root length (cm); leaf number; dry substance of the root and the aerial part (g). For the production of changes of Eugenia uvalha of quality, incorporation to the substratum of up to 1,30 kg m(-3) of P(2)O(5) sends regards to it.
Resumo:
A escória de siderurgia ferrocromo pode-se constituir em uma fonte alternativa de Ca e Mg, bem como em corretivo da acidez do solo, melhorando a sua fertilidade e o estado nutricional de culturas. Assim, objetivou-se avaliar os efeitos da escória de siderurgia ferrocromo nas alterações dos atributos químicos do solo, na nutrição e no desenvolvimento de mudas de maracujazeiro. Para tanto, instalou-se um experimento em condições de casa de vegetação, empregando-se as seguintes doses crescentes da escória: zero; metade; uma vez; uma vez e meia e duas vezes a dose para elevar a saturação por bases do solo a 80%, correspondendo às doses de: 0; 0,375; 0,750; 1,125 e 1,500 g dm-3, respectivamente. O substrato utilizado foi um Latossolo Vermelho distrófico, ácido (vasos com 2,8 dm³), que foi incubado com a escória de siderurgia, por 30 dias, para posterior semeadura do maracujazeiro, cultivando-as por 85 dias. A aplicação da escória de siderurgia ferrocromo promoveu a neutralização da acidez do solo. Entretanto, mesmo em doses relativamente baixas (360 kg ha-1), houve diminuição no acúmulo de nutrientes e na produção de matéria seca das mudas de maracujazeiro.
Resumo:
Os micronutrientes são importantes na nutrição das plantas, especialmente em solos tropicais com baixa concentração devido ao intemperismo. Como fonte alternativa de micronutrientes, tem-se a escória, resíduo da indústria de produção de ferro-gusa e aço. Assim, objetivou-se avaliar a escória como fonte de micronutrientes para mudas de goiabeira. O delineamento experimental foi em blocos ao acaso, com cinco repetições. As doses de escória foram aplicadas objetivando elevar em meia, uma vez, uma vez e meia, duas vezes e duas vezes e meia a saturação por bases do solo igual a 70%, correspondendo a 1,68; 3,36; 5,04; 6,72 e 8,40 g por vaso, além da testemunha sem aplicação. Após 90 dias de incubação da escória com o Argissolo Vermelho-Amarelo, cultivaram-se mudas de goiabeira (cv. Paluma) por 110 dias em vasos com 2,8 dm-3 de substrato, em viveiro telado, em Taquaritinga-SP, no período de outubro de 2000 a abril de 2001. A escória promoveu um efeito favorável na reação do solo e na disponibilidades de Zn, Cu, Mn e B do solo. Houve efeitos quadráticos nas concentrações de Zn, Cu e Mn do solo, que, por sua vez, estiveram associadas às doses de escória superiores a 5,8; 6,3 e 7,5 g por vaso, respectivamente, enquanto, para o B, esse efeito foi linear. A saturação por bases do solo, entre 51 e 55%, resultou em maior disponibilidade dos micronutrientes Zn, Cu e Mn no solo, ao passo que, para o B, esse valor foi de 65%. da mesma forma que ocorreu no solo, a aplicação da escória apresentou efeitos quadráticos nos teores de Zn, Cu e Mn da parte aérea e das raízes das mudas de goiabeira, enquanto, para o B, esse efeito foi linear. Concluiu-se, portanto, que a escória se comportou como material corretivo da acidez e como fonte de micronutrientes.
Resposta de mudas de goiabeira à aplicação de escória de siderurgia como corretivo de acidez do solo
Resumo:
A escória de siderurgia pode constituir-se em uma fonte alternativa de Ca e Mg, bem como corretivo de acidez do solo, melhorando o estado nutricional de mudas de goiabeira, podendo contribuir para o sucesso da implantação de um pomar. O presente trabalho objetivou avaliar os efeitos da escória de siderurgia nas alterações dos atributos químicos do solo, na nutrição das plantas e no crescimento de mudas de goiabeira. Para tanto, instalou-se um experimento em Taquaritinga-SP, em condições de vasos, com doses crescentes de escória de siderurgia: zero; metade; uma vez; uma vez e meia; duas vezes e duas vezes e meia a dose para elevar a saturação por bases para 70%. Após 90 dias da incubação da escória no solo, procedeu-se o plantio das mudas de goiabeira (cv. Paluma), propagadas vegetativamente por estaquia, em substrato de um Argissolo Vermelho-Amarelo ácido (vaso com 2,8 dm³), cultivando-as por 105 dias. A aplicação de escória de siderurgia elevou os valores de pH, SB, V%, e as concentrações de Ca, Mg e P, diminuindo H+Al do solo. Nas mudas de goiabeira, houve aumento significativo na altura, no número de folhas, na área foliar, nas concentrações de Ca, Mg e P da parte aérea e das raízes das plantas e, conseqüentemente, na matéria seca da parte aérea e das raízes. Portanto, a escória de siderurgia mostrou-se viável na produção de mudas de goiabeira como corretivo de acidez do solo e fonte de nutrientes (Ca e Mg ).
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
O objetivo deste trabalho foi avaliar a concentração de nitrogênio em plantas de milho e ao longo do perfil de um Latossolo Vermelho eutroférrico submetido a doses de lodo de esgoto e fertilizante mineral. O experimento foi instalado em delineamento experimental em blocos casualizados com 4 tratamentos (0,0; 55,0; 110,0 e 167,5 Mg.ha-1 de lodo de esgoto em doses acumuladas) e 5 repetições para um período de avaliação de 1 ano. A amostragem de solo foi realizada aos 60 dias após a emergência (d.a.e.) das plantas nas profundidades 0,0-0,1, 0,1-0,2, 0,2-0,4, 0,4-0,6, 0,6-0,8 e 0,8-1,0 m. Também aos 60, 80 e 128 d.a.e. foram coletadas, respectivamente, folha diagnose, planta inteira e grão. As maiores doses de lodo de esgoto proporcionaram maiores quantidades de nitrogênio no solo. O nitrogênio do solo, após a profundidade de 0,6 m, não diferiu entre as camadas avaliadas. Quanto maior a dose de lodo de esgoto, menor a proporção de nitrogênio em profundidade.
Resumo:
O presente trabalho foi realizado em condições de casa-de-vegetação com o objetivo de avaliar os efeitos da aplicação de doses de lodo de esgoto (equivalentes a 0, 5, 10 e 20 t/ha), complementadas ou não com nitrogênio e/ou potássio, sobre parâmetros de fertilidade do solo, absorção de macronutrientes e produção de matéria seca por plantas de sorgo granífero (Sorghum bicolor L. Moench.) cultivadas em Latossolo Vermelho Escuro. de maneira geral, foi possível observar que o lodo de esgoto, através de sua decomposição no solo, liberou nutrientes para as plantas, refletindo no aumento da produção de matéria seca. Entretanto, visando-se atender às necessidades da cultura, fez-se necessária a complementação com potássio.