101 resultados para Saturation of transferrin
Resumo:
The aim of this study was to evaluate the transdentinal cytotoxicity of experimental adhesive systems (EASs) with different hydrophilicity and dentin saturation solutions on odontoblast-like cells. One hundred 0.4-mm-thick dentin discs were mounted in in vitro pulp chambers and assigned to 10 groups. MDPC-23 cells were seeded onto the pulpal side of the discs, incubated for 48 h. The EASs with increasing hydrophilicity (R1, R2, R3 and R4) were applied to the occlusal side after etching and saturation of etched dentin with water or ethanol. R0 (no adhesive) served as controls. R1 is a non-solvated hydrophobic blend, R2 is similar to a simplified etch-and-rinse adhesive system and R3 and R4 are similar to self-etching adhesives. After 24 h, cell metabolism was evaluated by MTT assay (n = 8 discs) and cell morphology was examined by SEM (n = 2 discs). Type of cell death was identified by flow cytometry and the degree of monomer conversion (%DC) was determined by infrared spectroscopy (FTIR) after 10 s or 20 s of photoactivation. Data were analyzed by the Kruskal-Wallis and Mann-Whitney tests (α = 0.05). Dentin saturation with ethanol resulted in higher necrotic cell death ratios for R2, R3 and R4 compared with water saturation, although R2 and R3 induced higher SDH production. Photoactivation for 20 s significantly improved the %DC of all EASs compared with 10 s. A significant positive correlation was observed between the degree of hydrophilicity and %DC. In conclusion, except for R1, dentin saturation with ethanol increased the cytotoxicity of EASs, as expressed by the induction of necrotic cell death. © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.
Resumo:
Measurements are presented of the production of primary KS0 and Λ particles in proton-proton collisions at √s=7 TeV in the region transverse to the leading charged-particle jet in each event. The average multiplicity and average scalar transverse momentum sum of KS0 and Λ particles measured at pseudorapidities |η|<2 rise with increasing charged-particle jet pT in the range 1-10 GeV/c and saturate in the region 10-50 GeV/c. The rise and saturation of the strange-particle yields and transverse momentum sums in the underlying event are similar to those observed for inclusive charged particles, which confirms the impact-parameter picture of multiple parton interactions. The results are compared to recent tunes of the pythia Monte Carlo event generator. The pythia simulations underestimate the data by 15%-30% for KS0 mesons and by about 50% for Λ baryons, a deficit similar to that observed for the inclusive strange-particle production in non-single-diffractive proton-proton collisions. The constant strange- to charged-particle activity ratios with respect to the leading jet pT and similar trends for mesons and baryons indicate that the multiparton-interaction dynamics is decoupled from parton hadronization, which occurs at a later stage. © 2013 CERN, for the CMS Collaboration Published by the American Physical Society under the terms of the Creative Commons Attribution 3.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.
Resumo:
Acid mine drainage (AMD) is a serious environmental problem that creates acidic solution with high Mn concentrations. The speciation of residual Mn from AMD after an active treatment involving the addition of a neutralizing agent can reliably evaluate the treatment efficiency and provide knowledge of the Mn species being inputted into the environment. The aim of this study was to evaluate the in situ lability and speciation of Mn using the diffusive gradients in thin films (DGT) technique with treated drainage water from a uranium mine (TAMD). DGT devices with different binding phases (Chelex-100 and P81 and DE81membranes) were used to perform the in situ speciation of Mn. A comparison of the results from deploying DGT in the laboratory and in situ shows that the speciation of Mn in TAMD should be performed in situ. Linear deployment curves (from in situ experiments) indicate that the DGT device containing the Chelex-100 binding phase can be used to evaluate Mn lability in TAMD. The labile Mn fraction (from in situ measurements) obtained using the device containing the Chelex-100 resin ranged from 63 to 81% of the total Mn concentration and, when compared to the speciation obtained using the CHEAQS software, indicated that this device was capable of uptaking the free Mn2+ and a portion of the MnSO4(aq). The values obtained using the DGT technique were compared to those from on site solid phase extraction, and a good agreement was found between the results. The amount of negative Mn species sampled by DE81 device was insignificant (<1.5%) for all of the sites. Sites containing a relatively small amount of Ca (<40mgL-1) and measured using devices containing the P81 membrane agreed with the concentration predicted by the CHEAQS software for positive Mn species (Mn2+ and Mn(OH)+). Nevertheless, the speciation obtained using the CHEAQS software indicated that the concentrations of positive Mn species were underestimated for sites with relatively high Ca concentrations (>150mgL-1), which take place due to the saturation of binding sites in the P81 membrane. © 2013 Elsevier B.V.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A laparoscopia ainda é pouco utilizada como ferramenta para técnicas de reprodução assistida em cervídeos sul-americanos, não havendo informações sobre seus efeitos e protocolos anestésicos seguros para sua realização. Objetivaramse avaliar as possíveis alterações na freqüência cardíaca (FC), respiratória (FR), saturação de oxihemoglobina (SpO2) e temperatura retal (TR) durante a laparoscopia para visualização dos órgãos reprodutivos de seis fêmeas de veado-catingueiro (Mazama gouazoubira) anestesiadas com a associação cetamina (5mg/kg), xilazina (0,3mg/kg), midazolam (0,5mg/kg) e isofluorano. Cada animal, após anestesiado, foi posicionado em decúbito dorsal para realização de duas laparoscopias com insuflação abdominal de CO2 (14,2 ± 2,39mmHg; M ± EPM) com intervalo de 40 dias. Para avaliar os principais eventos da laparoscopia, esta foi dividida em três períodos: animal sem insuflação abdominal (P1), com insuflação abdominal (P2) e insuflação abdominal com os quadris elevados a 45º (P3). O controle foi realizado após 40 dias da última laparoscopia, para isto, cada animal foi novamente anestesiado e mantido em decúbito dorsal por um período de tempo igual ao tempo médio de duração das anestesias realizadas nas laparoscopias, sem que o procedimento laparoscópico fosse realizado. O tempo de anestesia dos controles foi também dividido em P1, P2 e P3, respeitando o tempo médio de duração de cada um destes períodos das laparoscopias. Para análise dos dados foi usado o teste de análise de variância (ANOVA) seguido do teste de Tukey e valores de P<0,05 considerados significativos. Não houve diferença significativa nos parâmetros estudados em nenhum dos períodos estabelecidos para o controle e laparoscopia. Porém, a FR média entre P1 (38,8 ± 4,42) e P3 (32,7 ± 4,81) e a TR média entre P1 (38,2ºC ± 0,17), P2 (37,6ºC ± 0,19) e P3 (37,0ºC ± 0,21) variaram significativamente, independente da laparoscopia. Tais dados permitiram concluir que a laparoscopia não promoveu alterações significativas nos parâmetros avaliados, embora o protocolo anestésico utilizado tenha contribuído para redução da temperatura retal resultando em risco de hipotermia durante a anestesia.
Resumo:
The serum protein concentration of newborn Holstein calves determined by means of sodium dodecyl sulphate-polyacrylamide (SDS-PAGE) was studied. Blood samples from 40 healthy newborn calves were obtained 48 hours after birth. Calves had been given 3 liters of colostrum within 2 hours after birth, following by dose corresponding by 15% of animal weight each 24 hours. The results showed three different proteinograms: 19 calves had 14 proteins with molecular weights (MW) ranging from 28,000 D to 170,000D (proteinogram 1); 11 calves had 14 proteins with MW ranging from 18,000 to 170,000 D (proteinogram 1); and 10 calves had 12 proteins with MW ranging from 28,000 D to 170,000 D (proteinogram 3). The three groups presented similar IgG levels. The highest serum concentration of ceruloplasmin were verified in proteinogram 3, which had the lowest serum level of protein with MW 58,000D. It was verified a1-antitrypsin only in proteinogram 2, which had no proteins with MW of 42,000 D and 37,000D. The highest serum concentrations of IgA and protein with MW 58,000 D, and the lowest serum levels of transferrin, haptoglobin, and acid glycoprotein were verified in proteinogram 3. Measurement of serum protein concentrations by SDS-PAGE may be useful in monitoring the occurrence of hypogammaglobulinemia and the neonatal disease in calves.
Resumo:
The soil erodibility factor is represented by the integrated effect of processes that regulate the water infiltration, soil resistance and the transport of soil particles. Therefore, this study had as objective to estimate the soil erodibility in the Corrego do Tijuco watershed, São Paulo State, Brazil, for guiding farmers in decision making for application of techniques for soil conservation. The soil samples were collected in a regular spacing of 500 m, resulting in a total of 310 points in a 0-20.0 m depth in an area of approximately 8,000 ha. For the estimation of soil erodibility (K) was applied a mathematical model which takes into account the soil organic matter content, the sand and silt size fractions, the soil permeability, and the particle mean diameter for each point of soil sampling. Estimated values greater than 0.040 Mg ha h ha(-1) MJ(-1) mm(-1) were considered very high for this factor. In areas with greater degree of erodibility occurs the Argisols order predominance, that shows high susceptibility to the development of interrill erosion due to its remarkable performance in relation to textural gradient, thereby, the interrill erosion rates can be very intensive due to rapid saturation of upper horizon, increasing the erosion process. At the Latosols (Oxisols) areas were also observed high soil erodibility values that under inappropriate conditions of soil occupation, concentrating runoff of rain water, leading to appear deep gullies.
Resumo:
Citrus cultures have a fundamental importance to the Brazilian economy; certain aspects such as plant nutrition, yield, and fruit quality are vital for the citrus industry sustainability. The present study evaluated the nutritional status of manganese in adult Pear orange trees using different lime rates topically applied to the soil. The direct evaluation of lime rates effects on leaf manganese (Mn) levels revealed a decrease of the nutrient correlated to its increased, as well as passage of time between application and measurement. Foliar sampling 30 months after surface lime application evidenced a high correlation of foliar manganese levels with soil base saturation of 10-20 cm. Leaf manganese levels which showed a great probability of high productivity were between 33 and 70 mg kg-1.
Resumo:
The bean is a nutrient demanding plant, either due to the small and shallow root system or due to the short cycle. A study with doses of lime and boron was conducted and correlations were made between two types of leaf (+ 1 and + 3) of the bean with the contents of these elements in plants and production, aiming to establish the most appropriate leaf for diagnosis of nutritional status. The experiment was conducted in greenhouse conditions employing bean seeds cv. BRS Talisma. Lime rates considering the saturation of bases (70%), were calculated as zero, half the standard dose, dose to increase V = 70% (default), one and a half and twice the standard dose, while the boron amounts used were: zero, 0.6, 1.2, 1.8 and 2.4 mg B dm(-3). At the time of flowering, diagnostic leaves + 1 and + 3 (mature leaves from the apex) were collected along with sampling of a plant (aerial part) per pot and the measurement of production. Through correlations it was verified that nutrients, calcium, magnesium and boron in the leaf + 3 showed higher correlation coefficients with levels in the plant and production data.
Resumo:
Objetivou-se avaliar os efeitos da aplicação de calcário e boro nos atributos químicos de um Latossolo, estado nutricional e produtividade da cultura do feijoeiro. As doses de calcário empregadas foram crescentes, considerando-se a saturação por bases igual a 70%, correspondendo às doses: zero; 0,6; 1,2 (v = 70%); 1,8 e 2,4 t ha-1. O calcário utilizado apresentava poder relativo de neutralização total (PRNT), poder de neutralização (PN) e reatividade (RE) de 131; 137 e 95%, respectivamente. As doses de boro estudadas foram iguais a 0 (zero); 0,6; 1,2; 1,8; e 2,4 mg dm-3 de B, sendo a referência para definição das mesmas a de 1,2 mg dm-3 de B (ou 1,2 kg ha-1 de B). Utilizou-se como fonte o ácido bórico (H3BO3) p.a. (17% B). Na época do florescimento foi avaliado o estado nutricional das plantas e, aos 90 dias foram avaliadas a fertilidade do solo e a produção de grãos. No solo houve melhoria dos atributos pH, SB, V e na concentração de Ca e Mg, e do B com o emprego da adubação boratada. A interação da calagem com a adubação boratada promoveu maior acúmulo de Ca, Mg e B nas plantas. Os dados apresentados demonstram que o feijoeiro foi responsivo à calagem e à adubação boratada, tendo atingido bons índices de produção com a utilização de 1,8 kg ha-1 de B com doses crescentes de calcário.
Resumo:
A aplicação de calcário superficial na seringueira em produção pode melhorar a fertilidade do solo e a produção de borracha seca. O objetivo deste trabalho foi avaliar o efeito da aplicação superficial de calcário no solo na produtividade de borracha seca. O experimento foi instalado em seringal em produção (15 anos), num Argissolo Vermelho-Amarelo com saturação por bases (V) de 39%. Os tratamentos constituíram-se das seguintes doses de calcário calcinado: zero, metade da dose recomendada, uma vez a dose recomendada e duas vezes a dose recomendada, correspondendo a 0, 0,21, 0,42 e 0,84 t ha-1, respectivamente. As doses foram calculadas considerando a saturação por bases recomendada para a cultura no Estado de São Paulo, igual a 50%. A aplicação de calcário neutralizou a acidez do solo e aumentou a saturação por bases até a camada de 0,20 m, e aumentou a produtividade da borracha seca. A produtividade máxima esteve associada à saturação por bases de 57% e teor foliar de Ca de 8 g kg-1.
Resumo:
Este trabalho objetivou avaliar os efeitos da aplicação de calcário ao substrato de produção das mudas de maracujazeiro, acompanhando os benefícios no desenvolvimento, na produção de matéria seca e no estado nutricional das plantas. O delineamento experimental foi em blocos ao acaso, com cinco tratamentos e quatro repetições. As doses de calcário calcinado foram aplicadas objetivando elevar em meia; uma vez; uma vez e meia, e duas vezes a dose para elevar o V = 80%, correspondendo a 0,44; 0,88; 1,32; 1,76 g por vaso, respectivamente, além da testemunha sem aplicação. As mudas receberam doses de N, P, K, Zn e B de 300; 450; 150; 5,0 e 0,5 mg dm-3, respectivamente, sendo o N e o K parcelados em três vezes (30; 45 e 60 dias após a semeadura). O experimento foi conduzido em casa de vegetação da FCAV/Unesp, em Jaboticabal-SP, no período dezembro/2002 até abril/2003. A unidade experimental foi constituída por vasos com 2 dm³ de substrato de um Latossolo Vermelho distrófico. Após 80 dias da semeadura, avaliaram-se: o diâmetro do caule, a altura, o número de folhas, a área foliar e a matéria seca da parte aérea e das raízes, bem como os teores de macro e micronutrientes. As mudas de maracujazeiro responderam à aplicação de calcário. O maior desenvolvimento das plantas esteve associado à saturação por bases do solo de 56% e a concentrações de Ca e Mg no solo de 20 e 8 mmol c dm-3, e a teores de Ca e Mg na parte aérea de 12,8 e 4,0 g kg-1, respectivamente.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The determination of the amount of sample units that will compose the sample express the optimization of the workforce, and reduce errors inherent in the report of recommendation and evaluation of soil fertility. This study aimed to determine in three systems use and soil management, the numbers of units samples design, needed to form the composed sample, for evaluation of soil fertility. It was concluded that the number of sample units needed to compose the composed sample to determination the attributes of organic matter, pH, P, K, Ca, Mg, Al and H+Al and base saturation of soil vary by use and soil management and error acceptable to the mean estimate. For the same depth of collected, increasing the number of sample units, reduced the percentage error in estimating the average, allowing the recommendation of 14, 14 and 11 sample in management with native vegetation, pasture cultivation and corn, respectively, for a error 20% on the mean estimate.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)