Structure of chorismate synthase from Mycobacterium tuberculosis

In bacteria, fungi, plants, and apicomplexan parasites, the aromatics compounds, such as aromatics amino acids, are synthesized through seven enzymes from the shikimate pathway, which are absent in mammals. The absence of this pathway in mammals make them potential targets for development of new therapy against infectious diseases, such as tuberculosis, which is the world's second commonest cause of death from infectious disease. The last enzyme of shikimate pathway is the chorismate synthase (CS), which is responsible for conversion of the 5-enolpyruvylshikimate-3-phosphate to chorismate. Here, we report the crystallographic structure of CS from Mycobacterium tuberculosis (MtCS) at 2.65 angstrom resolution. The MtCS structure is similar to other CS structures, presenting beta-alpha-beta sandwich structural topology, in which each monomer of MtCS consists of a central helical core. The MtCS can be described as a tetramer formed by a dimer of dimers. However, analytical ultracentrifugation studies suggest the MtCS is a dimer with a more asymmetric shape than observed on the crystallographic dimer and the existence of a low equilibrium between dimer and tetramer. Our results suggest that the MtCS oligomerization is concentration dependent and some conformational changes must be involved on that event. (c) 2005 Elsevier B.V. All rights reserved.

The X-ray crystallographic structure of Escherichia coli branching enzyme

Branching enzyme catalyzes the formation of alpha-1,6 branch points in either glycogen or starch. We report the 2.3-Angstrom crystal structure of glycogen branching enzyme from Escherichia coli. The enzyme consists of three major domains, an NH2-terminal seven-stranded beta-sandwich domain, a COOH-terminal domain, and a central alpha/beta-barrel domain containing the enzyme active site. While the central domain is similar to that of all the other amylase family enzymes, branching enzyme shares the structure of all three domains only with isoamylase. Oligosaccharide binding was modeled or branching enzyme using the enzyme-oligosaccharide complex structures of various alpha-amylases and cyclodextrin glucanotransferase and residues were implicated in oligosaccharide binding. While most of the oligosaccharides modeled well in the branching enzyme structure, an approximate 50degrees rotation between two of the glucose units was required to avoid steric clashes with Trp(298) of branching enzyme. A similar rotation was observed in the mammalian alpha-amylase structure caused by an equivalent tryptophan residue in this structure. It appears that there are two binding modes for oligosaccharides in these structures depending on the identity and location of this aromatic residue.

Interfacial fracture of dentin adhesively bonded to quartz-fiber reinforced composite

The paper presents the results of an experimental study of interfacial failure in a multilayered structure consisting of a dentin/resin cement/quartz-fiber reinforced composite (FRC). Slices of dentin close to the pulp chamber were sandwiched by two half-circle discs made of a quartz-fiber reinforced composite, bonded with bonding agent (All-bond 2, BISCO, Schaumburg) and resin cement (Duo-link. BISCO, Schaumburg) to make Brazil-nut sandwich specimens for interfacial toughness testing. Interfacial fracture toughness (strain energy release rate, G) was measured as a function of mode mixity by changing loading angles from 0 degrees to 15 degrees. The interfacial fracture surfaces were then examined using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDX) to determine the failure modes when loading angles changed. A computational model was also developed to calculate the driving forces, stress intensity factors and mode mixities. Interfacial toughness increased from approximate to 1.5 to 3.2 J/m(2) when the loading angle increases from approximate to 0, 0 to 15 degrees. The hybridized dentin/cement interface appeared to be tougher than the resin cement/quartz-fiber reinforced epoxy. The Brazil-nut sandwich specimen was a suitable method to investigate the mechanical integrity of dentin/cement/FRC interfaces. (C) 2011 Elsevier B.V. All rights reserved.

Electrochemical genosensors for the detection of Bonamia parasite. Selection of single strand-DNA (ssDNA) probes by simulation of the secondary structure folding

A post-PCR nucleic acid work by comparing experimental data, from electrochemical genosensors, and bioinformatics data, derived from the simulation of the secondary structure folding and prediction of hybridisation reaction, was carried out in order to rationalize the selection of ssDNA probes for the detection of two Bonamia species, B. exitiosa and B. ostreae, parasites of Ostrea edulis.Six ssDNA probes (from 11 to 25 bases in length, 2 thiolated and 4 biotinylated) were selected within different regions of B. ostreae and B. exitiosa PCR amplicons (300 and 304 bases, respectively) with the aim to discriminate between these parasite species. ssDNA amplicons and probes were analyzed separately using the "Mfold Web Server" simulating the secondary structure folding behaviour. The hybridisation of amplicon-probe was predicted by means of "Dinamelt Web Server". The results were evaluated considering the number of hydrogen bonds broken and formed in the simulated folding and hybridisation process, variance in gaps for each sequence and number of available bases. In the experimental part, thermally denatured PCR products were captured at the sensor interface via sandwich hybridisation with surface-tethered probes (thiolated probes) and biotinylated signalling probes. A convergence between analytical signals and simulated results was observed, indicating the possibility to use bioinformatic data for ssDNA probes selection to be incorporated in genosensors. (C) 2011 Elsevier B.V. All rights reserved.

Anti-inflammatory activity of Alchornea triplinervia ethyl acetate fraction: Inhibition of H2O2, NO and TNF-alpha

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização eletroforética e análise de subgrupo de rotavírus em rebanhos bovinos leiteiros do Estado de São Paulo

Foi realizado um estudo para determinar a ocorrência de infecção por rotavírus em rebanhos bovinos leiteiros. Foram analisadas 375 amostras de fezes de bezerros, na faixa etária 1 a 45 dias, provenientes de animais pertencentes a nove propriedades rurais, situadas em seis municípios da região nordeste do Estado de São Paulo. Destas, 193 pertenciam a animais com diarréia e 182 foram obtidas de animais clinicamente sadios. As técnicas utilizadas para a detecção de rotavírus foram o ensaio imunoenzimático (EIE) e a eletroforese em gel de poliacrilamida (EGPA). Por meio do EIE foram detectadas 11,2% (42/375) de amostras positivas, 15% delas (29/193) obtidas de animais com diarréia e 7,1% (13/182) colhidas de animais sem diarréia. A análise do perfil do genoma indicou a presença de seis eletroferótipos distintos, característicos de rotavírus do grupo A. Um único eletroferótipo foi detectado em três rebanhos, o qual permaneceu constante durante o período de amostragem. em dois rebanhos diferentes eletroferótipos foram detectados, embora com maior prevalência de um dado perfil. A caracterização das amostras positivas em subgrupos foi realizada por meio do EIE com duplo sanduíche, utilizando-se anticorpos monoclonais (MAb) específicos para antígenos de subgrupo (I e II). Foram caracterizadas como subgrupo I 52,4% (22/42) das amostras testadas, nenhuma reagiu com MAb de subgrupo II, enquanto as demais, 47,6% (20/42), não reagiram com nenhum dos dois subgrupos.

Composição química e digestibilidade de fenos tratados com amônia anidra ou uréia

O experimento foi conduzido para se avaliarem as alterações na composição química e na digestibilidade in vitro da matéria seca (DIVMS) dos fenos de Brachiaria decumbens Stapf, Brachiaria brizantha (Hochst ex. A. Rich) Stapf e jaraguá (Hyparrhenia rufa Ness Stapf), colhidos no estádio de maturação das sementes e tratados com amônia anidra (3,0% MS) ou uréia (5,4% MS). A análise dos dados demonstra que a amonização diminuiu os conteúdos de FDN e hemicelulose com a mesma eficiência. Os tratamentos químicos não alteraram os teores de FDA, celulose e lignina. Observou-se aumento nos teores de compostos nitrogenados, como N total e N insolúvel em detergente ácido (NIDA) em resposta à amonização. A relação NIDA/NT diminuiu com a amonização, aumentando a quantidade de N disponível para a digestão. A DIVMS aumentou em resposta às alterações observadas na composição química da fração fibrosa e incremento no conteúdo de N prontamente digestível dos fenos tratados.

Estudo Comparativo de Três Diferentes Modalidades de Elisa para Medir os Anticorpos Contra o Vírus da Bronquite Infecciosa em Frangos Vacinados e Não Vacinados

No presente estudo, foram vacinados 150 frangos de corte de um dia de idade com sorotipo H120, e, após 28 dias desafiados à vacinação com o sorotipo M 41 do vírus da bronquite infecciosa das aves. da mesma forma, foram obtidos 150 soros de aves não vacinadas para a análise. Os respectivos soros foram analisados 28, 34 e 46 dias após o desafio, examinados através das técnicas de ELISA indireto (ELISA-I), Sandwich ELISA (S-ELISA) e ELISA com bloqueio de fase líquida (ELISA-BFL) e comparados com a técnica padrão de soroneutralização (SN) para efeito de cálculo da especificidade e sensibilidade relativas, bem como os valores predictivos positivos e negativos. O cálculo do coeficiente de correlação também foi empregado para a análise de concordância. Assim, os valores da correlação encontrados foram r = 0.98 entre ELISA-BFL x SNT, r = 0.79 entre S-ELISA x SNT e r = 0.74 ELISA-I x SNT. No entanto, quando comparamos as técnicas de ELISA entre si, ELISA-BFL x S-ELISA, ELISA-BFL x ELISA-I e S-ELISA x ELISA-I os valores encontrados foram r = 0.75, r = 0.69 e r = 0.79. A técnica de ELISA-BFL demonstrou melhor sensibilidade relativa que as técnicas de S-ELISA e ELISA-I, mesmo 46 dias após o desafio com a estirpe heteróloga. Entretanto, apesar das técnicas de S-ELISA e ELISA-I apresentarem especificidade realtiva superiores, a melhor correlação observada foi entre as técnicas de ELISA-BFL e a SN.

Synthesis and properties of branched polyethylene/high-density polyethylene blends using a homogeneous binary catalyst system composed of early and late transition metal complexes

Branched polyethylene/high-density polyethylene blends (BPE/HDPE) with a wide range of molecular weights, melt flow indexes (MFI), and intrinsic viscosity were prepared using the homogeneous binary catalyst system composed by Ni(alpha-diimine)Cl-2 (1) (alpha-diimine = 1,4-bis(2,6-diisopropylphenyl)-acenaphthenediimine) and {Tp(Ms*)} TiCl3 (2) (Tp(Ms*)=hydridobis(3-mesitylpyrazol-1-yl)(5-mesityl-pyrazol-1-yl)) activated with MAO and/or TIBA in hexane at two different polymerization temperatures (30 and 55 degreesC) and by varying the nickel loading molar fraction (x(Ni)). At all Temperatures, a non-linear correlation between the x(Ni) and the productivity was observed, suggesting the occurrence of a synergistic effect between the nickel and the titanium catalyst precursors, which is more pronounced at 55 degreesC. The molecular weight of the BPE/HDPE blends considerably decreases with increasing Al/M molar ratio. The melt flow indexes (MFI) and intrinsic viscosities (eta) are strongly affected by x(Ni), but the melting temperatures are nearly constant, 132 +/- 3 degreesC. Dynamic mechanical thermal analysis (DMTA) shows the formation of different polymeric materials where the stiffness vanes according, to the x(Ni) and temperature used in the polymerization reaction. The surface morphology of the BPE/HDPE blends studied by scanning electron microscopy (SEM) revealed a low miscibility between the PE phases resulting in the formation of a sandwich structure after etching with o-xylene.

Magneto Immunoassays for Plasmodium falciparum Histidine-Rich Protein 2 Related to Malaria based on Magnetic Nanoparticles

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Distribution of Xylella fastidiosa in citrus rootstocks and transmission of citrus variegated chlorosis between sweet orange plants through natural root grafts

To study translocation of Xylella fastidiosa to citrus rootstocks, budsticks from citrus variegated chlorosis (CVC)-affected cv. Pera sweet orange (Citrus sinenesis (L.) Osb.) were top grafted on 15 citrus rootstocks. Disease symptoms were conspicuous 3 months later on all 15 rootstocks tested. The presence of X. fastidiosa was confirmed by light microscopy, double-antibody sandwich enzyme-linked immunosorbent assays, and polymerase chain reaction in rootlets and main roots of CVC-symptomatic Pera sweet orange in 11 of the 15 rootstocks tested. These results suggest that bacterial translocation from the aerial plant parts to the root system occurs but is not essential for X. fastidiosa to induce symptoms in the aerial parts. Bacterial translocation to the roots was not correlated with CVC leaf-symptom severity in the Pera scion. To determine if CVC disease could be transmitted by natural root grafts, two matched seedlings of each of four sweet orange cultivars (Pera, Natal, Valencia, and Caipira) were transplanted into single pots. One seedling rootstock of each pair was inoculated by top grafting with a CVC-contaminated budstick while the other seedling rootstock was cut but not graft inoculated. Transmission of X. fastidiosa from an inoculated plant to a noninoculated plant sharing the same pot was observed in all four sweet orange cultivars tested. Transmission was confirmed by observation of natural roots grafts between the two plants, presence of X. fastidiosa in the root grafts, and disease development in the uninoculated plants. This is the first report of transmission of CVC disease through natural root grafts.

Polymer light emitting devices with Langmuir Blodgett (LB) films of a polyfluorene derivative

Polyfluorenes are promising materials for the emitting layer of polymer light emitting devices (PLEDs) with blue emission. In this work, we report on PLEDs fabricated with Langmuir-Blodgett (LB) films of a polyfluorene derivative, namely poly(9,9-di-hexylfluorenediyl vinylene-alt-1,4-phenylenevinylene) (PDHF-PV). Y-type LB films were transferred onto ITO substrates at a surface pressure of 35 mN m-1 and with dipping speed of 3 mm min -1. A thin aluminum layer was evaporated on top of the LB film, thus yielding a sandwich structure (ITO/PDHF-PV(LB)/Al). Current-voltage (I vs V) measurements indicate that the device displays a classical behavior of a rectifying diode. The threshold value is approximately 5 V, and the onset for visible light emission occurs at ca. 10 V. From the a.c. electrical responses we infer that the active layer has a typical behavior of PLEDs where the real component of ac conductivity obeys a power-law with the frequency. Cole-Cole plots (Im(Z) vs. Re(Z)) for the device exhibit a series of semicircles, the diameter of which decreases with increasing forward bias. This PLED structure is modeled by a parallel resistance and capacitance combination, representing the dominant mechanisms of charge transport and polarization in the organic layer, in series with a resistance representing the ITO contact. Overall, the results presented here demonstrate the feasibility of LEDs made with LB films of PDHF-PV.

Diferentes níveis de torta de nabo forrageiro (Raphanus sativus) como aditivo na silagem de capim elefante

The aim of the study was to evaluate the effects of the inclusion of different levels of turnip cake (TNF) on the chemical composition, digestibility and quality of elephant grass silage. Due to the quality of the oil extracted from the seeds, the turnip is being considered as an important option for the biodiesel industry in Brazil. The turnip cake is obtained from the mechanical pressing of the seeds to produce oil, and it differs from the meal by the content of fat. In the meal the fat is less than 1%, due to the use of solvents for the oil extraction. Experimental silos were used in a completely randomized design, in factorial arrangement 2 x 3 (two types of material and four levels of inclusion). The materials were represented for original material (fresh) and ensiled material, with four levels of inclusion of TNF (0, 3, 6, and 9%). Dry matter (DM), ether extract (EE), crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF), nitrogen indigestible neutral detergent (NIDN), nitrogen indigestible acid detergent (NIDA), ash (MM), lignin (LIG), buffer power (PT), calcium (Ca), phosphorus (P) and in vitro dry matter digestibility (IVDDM) were determined in all materials. In silage, additionally, were determined pH and amoniacal nitrogen (NH3-N). There were effects of inclusion of TNF and the type of material on the DM, CP, ADF, NIDA, P, and MM contents and on IVDDM. The interaction of the two factors was observed to the contents of CP, NDF, ADF, NIDA, Ca and IVDDM. In silage, the DM levels were lower (P < 0.05) than in original material. The values of DM were increased linearly as increased levels of inclusion of TNF. The fibrous components, including NIDN and NIDA, decreased linearly when the TNF increased. In all treatments, values of pH and N-NH3 considered ideal for good silage were observed. The IVDDM was reduced, linearly, with the addition of increasing levels of TNF. A negative correlation (-0.95) between IVDDM and content of EE may explain the tendency of this variable, due to the EE content increased linearly with the addition of TNF. The addition of TNF as an additive in silage of elephant diminished IVDDM. Considering the changes observed in the chemical composition and digestibility of elephant grass silage with TNF as additive, suggests that this should not be included at levels exceeding 3%. On the other hand, the silages with TNF as additive showed appropriate fermentation characteristics.

Isolated flavonoids against mammary tumour cells LM2

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A Bayesian approach to estimate the accuracy of in-house ELISA assay to measure rabies antibodies from compulsory vaccinated dogs and cattle

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)