QTL identification for tolerance to fruit set in tomato by FAFLP markers

This study aimed to detect quantitative trait loci (QTL) by fALP (Fluorescent Amplified Fragment Length Polymorphism) markers associated to the trait tomato fruit set at high temperatures. A biparental cross between line Jab-95 (heat-tolerant) and cultivar Caribe (heat-susceptible) was made. A total of 192 plants of the F2 generation were evaluated, generating 172 polymorphic markers through six primer combinations previously identified by the Bulked Segregant Analysis technique. To construct the genetic map, 106 of the 172 markers that segregated in the expected Mendelian segregation proportion (3:1) were used. The map covered 1191.46 cM of the genome. Six trait-linked QTL were identified in the analysis of simple markers and three others by the interval-mapping methodology. These results could be highly useful in improvement programs, since heat-tolerant plants can be selected rapidly, which improves tomato fruit set.

Salmonella enterica serovar typhimurium colonizing the lumen of the chicken intestine grows slowly and upregulates a unique set of virulence and metabolism genes

The pattern of global gene expression in Salmonella enterica serovar Typhimurium bacteria harvested from the chicken intestinal lumen (cecum) was compared with that of a late-log-phase LB broth culture using a whole-genome microarray. Levels of transcription, translation, and cell division in vivo were lower than those in vitro. S. Typhimurium appeared to be using carbon sources, such as propionate, 1,2-propanediol, and ethanolamine, in addition to melibiose and ascorbate, the latter possibly transformed to D-xylulose. Amino acid starvation appeared to be a factor during colonization. Bacteria in the lumen were non- or weakly motile and nonchemotactic but showed upregulation of a number of fimbrial and Salmonella pathogenicity island 3 (SPI-3) and 5 genes, suggesting a close physical association with the host during colonization. S. Typhimurium bacteria harvested from the cecal mucosa showed an expression profile similar to that of bacteria from the intestinal lumen, except that levels of transcription, translation, and cell division were higher and glucose may also have been used as a carbon source. © 2011, American Society for Microbiology.

A set of linear equations to calculate the steady-state operation of an electrical distribution system

In this paper, the calculation of the steady-state operation of a radial/meshed electrical distribution system (EDS) through solving a system of linear equations (non-iterative load flow) is presented. The constant power type demand of the EDS is modeled through linear approximations in terms of real and imaginary parts of the voltage taking into account the typical operating conditions of the EDS's. To illustrate the use of the proposed set of linear equations, a linear model for the optimal power flow with distributed generator is presented. Results using some test and real systems show the excellent performance of the proposed methodology when is compared with conventional methods. © 2011 IEEE.

Combined search for the standard model Higgs boson decaying to bb̄ using the D0 run II data set

We present the results of the combination of searches for the standard model Higgs boson produced in association with a W or Z boson and decaying into bb̄ using the data sample collected with the D0 detector in pp̄ collisions at √s=1.96TeV at the Fermilab Tevatron Collider. We derive 95% C.L. upper limits on the Higgs boson cross section relative to the standard model prediction in the mass range 100GeV≤M H≤150GeV, and we exclude Higgs bosons with masses smaller than 102 GeV at the 95% C.L. In the mass range 120GeV≤M H≤145GeV, the data exhibit an excess above the background prediction with a global significance of 1.5 standard deviations, consistent with the expectation in the presence of a standard model Higgs boson. © 2012 American Physical Society.

Rough turning of titanium alloy (6Al-4V)

Metal machining is the complex process due the used cutting parameters. In metal cutting process, materials of workpiece differ widely in their ability to deform plastically, to fracture and to sustain tensile stresses. Moreover, the material involved in the process has a great influence in these operations. The Ti-6Al-4V alloy is very used in the aeronautical industry, mainly in the manufacture of engines, has very important properties such the mechanical and corrosion resistance in high te mperatures. The turning of the Ti-Al-4V alloy is very difficult due the rapid tool wear. Such behavior result of the its low thermal conductivity in addition the high reactivity with the cutting tool. The formed chip is segmented and regions of the large deformation named shear bands plows formed. The machinability of the cutting process can be evaluated by several measures including power consume, machined surface quality, tool wear, tool life, microstructure and morphology of the obtained chip. This paper studies the effect of cutting parameters, speed and feed rates, in the tool wear and chip properties using uncoating cemented carbide tool. Microe-structural characterization of the chip and tool wear was performed using scanning electron microscopy (SEM) and Light Optical Mcroscopy (LOM).

Rough virulent strain of Brucella ovis induces pro- and anti-inflammatory cytokines in reproductive tissues in experimentally infected rams

The ovine brucellosis caused by Brucella ovis has tropism for reproductive tissues but until now the mechanism of bacterial persistence is not understood. Cytokine expression profiles were studied for 8 months in rams after being experimentally infected with the rough virulent strain of B. ovis (R- B. ovis) to study the pathogenesis of B. ovis and immune mechanism possibly associated to bacteria tropism and persistence. The messenger RNA (mRNA) expression levels of interleukin-1α (IL-1α), IL-1β, IL-6, IL-10, IL-12, interferon-γ (INF-γ) and tumour necrosis factor-α (TNF-α) cytokines were quantified by real-time quantitative RT-PCR (qRT-PCR) in reproductive tissues (epididymus, testicles, ampolae, vesicular glands and bulbourethral glands), and non-reproductive (liver, spleen and kidneys) tissues at 30, 60, 120 and 240 days post infection (dpi). During the acute phase of infection at 30. dpi, the host immune response was most notable demonstrating an up-regulation of several cytokines in reproductive tissues, including the epididymus (IL-6, IL-1β and IL-1α), testicles (INF-γ and IL-12), bulbourethral glands (IL-6 and TNF-α) and ampolae (INF-γ, IL-10, IL-1β and IL-1α). During the development of infection, cytokine gene expression levels decreased, providing evidence of immunosuppression and evidence of immune evasion that favoured persistence of chronic R- B. ovis infection. During the chronic phase of R- B. ovis infection (120 and 240. dpi), cytokine production was down-regulated in the epididymus (IL-1β and IL-1α), testicles (INF-γ and IL-12), and ampolae (INF-γ, IL-10, IL-1β and IL-1α), with the exception of the bulbourethral glands (IL-6 and TNF-α) and epididymus (IL-6); in these tissues, R- B. ovis infection resulted in up-regulation of the pro-inflammatory cytokine IL-6. Herein, we report cytokine expression profiles in tissues of rams experimentally infected with the rough strain of B. ovis, which are associated with bacterial persistence and macrophage activation. © 2012 Elsevier B.V.

Macroscopic and Microscopic findings in a set of congenital anomalies in two calves produced through in Vitro production

In vitro production and somatic cell nuclear transfer are biotechnologies widely used for breeding cattle, although may result in congenital anomalies. This paper aims to report a set of congenital anomalies in two Nelore calves, a male and a female, produced through in vitro fertilization. The major anomalies revealed at necropsy were hypospadias, bifid scrotum, atresia ani and rectum ending in blind pouch in the male calf. In the female calf accessory spleen, atresia ani, underdevelopment of extern genitalia and urethral orifice, and rectum ending in blind pouch forming a uterus-rectum fistula were observed.

Usabilidade de site e tecnologia wiki aplicadas ao jogo de xadrez no ambiente virtual =: Usability of site and wiki technology applied to the chess set in virtual environment

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Dry and wet seasons set the phytochemical profile of the Copaifera langsdorffii Desf. essential oils

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Anthropogenic edges, isolation and the flowering time and fruit set of Anadenanthera peregrina, a cerrado savanna tree

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

In Vivo Osteogenesis and In Vitro Streptococcus mutans Adherence: Porous-Surfaced Cylindrical Implants vs Rough-Surfaced Threaded Implants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On the contact stiffness and nonlinear vibration of an elastic body with a rough surface in contact with a rigid flat surface

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Using ecological thresholds to evaluate the costs and benefits of set-asides in a biodiversity hotspot

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Involutions whose fixed set has three or four components: a small codimension phenomenon

Let T : M → M be a smooth involution on a closed smooth manifold and F = n j=0 F j the fixed point set of T, where F j denotes the union of those components of F having dimension j and thus n is the dimension of the component of F of largest dimension. In this paper we prove the following result, which characterizes a small codimension phenomenon: suppose that n ≥ 4 is even and F has one of the following forms: 1) F = F n ∪ F 3 ∪ F 2 ∪ {point}; 2) F = F n ∪ F 3 ∪ F 2 ; 3) F = F n ∪ F 3 ∪ {point}; or 4) F = F n ∪ F 3 . Also, suppose that the normal bundles of F n, F 3 and F 2 in M do not bound. If k denote the codimension of F n, then k ≤ 4. Further, we construct involutions showing that this bound is best possible in the cases 2) and 4), and in the cases 1) and 3) when n is of the form n = 4t, with t ≥ 1.

Confecção e montagem do set-up ortodôntico

Diagnosis and planning stages are critical to the success of orthodontic treatment, in which the orthodontist should have many elements that contribute to the most appropriate decision-making. The orthodontic set-up is an important resource in the planning of corrective orthodontics therapy. It consists of the repositioning of the teeth previously removed from the study dental casts and reassembled on its remaining basis. When properly made, the set-up allows a three-dimensional preview of problems and limitations of the case, assisting in decision-making regarding tooth extractions in cases with problems of space, amount of anchorage loss extent and type of tooth movement, discrepancy of dental arch perimeter, discrepancy of inter-arch tooth volume, among others, indicating the best option for treatment. This paper outlines the most important steps for its confection, an evaluation system and its application in the preparation of orthodontic treatment planning.