87 resultados para Protocolos de IATF


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this study was to evaluate the LH surge after last hormonal injection of synchronization of ovulation protocols in buffalo. Fifteen multiparous buffaloes received 25 mg of Lecirelin in Day 0, and 150 mg of D-Cloprostenol on Day 7. On Day 8, estradiol benzoate was injected in Group 1 (0.5 mg, n = 5) and Group 2 (1.0 mg, n = 5). On Day 9, five buffaloes received 25 mg of Lecirelin (Control). Blood samples were collected for measure the LH concentrations on Day 7 and then every 3 hours until 72 hours after the PGF 2a injection. For evaluation of LH surge were compared the interval between PGF 2a injection to LH surge, duration, amplitude and area under the LH peak. The LH surge occurred 51.0 + 0.0 hours, 47.3 + 2.7 hours and 47.0 + 3.8 hours after PGF 2a injection for Control, Group 1 and Group 2, respectively (P > 0.05). The duration of LH peak in Control (7.8 + 1.5 hours) was shorter than Groups 1 and 2 (10.5 + 1.5 hours vs. 10.8 + 2.4 hours, respectively; P < 0.05). The amplitudes of LH peak were 4.5 + 0.4 ng/mL, 4.0 + 0.4 ng/mL and 4.3 + 0.8 ng/mL for Control, Group 1 and Group 2, respectively (P > 0.05). The area under LH peak for Control (4.8 ± 0.7) was smaller than the areas of the Groups 1 and 2 (8.8 ± 2.5 vs. 8.7 2.2, respectively; P < 0.05). In summary, the estradiol benzoate injection provided higher duration and area of LH peak than GnRH injection in Ovsynch protocol in buffalo.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study was carried out with the objective of examining the effect of the short-term estrus synchronization protocol. Ewes were divided in four groups: Control Group (MAP sponges for 12 days, and eCG at withdrawal); Groups I, II and III used the sponge for four days, and 100 μg of PGF was applied at withdrawal; and additionally, Group I (0.1 mg of Estradiol benzoate - EB, in the sponge placement, and in the withdrawn 400 UI of eCG and 50 μg of GnRH 48h later); Group II (35 mg of injectable progesterone and 0.1 mg of EB in the sponge placement, and 400 UI of eCG at withdrawal, and 50 μg of GnRH 48h after); Group III (35 mg of injectable progesterone and 0.2 mg of EB in the sponge placement, and 400 UI of eCG at withdrawal, and 50 ?g of GnRH 56h after). Exams were accomplished for ultrasound and determine the plasmatic concentrations of progesterone and observations of the beginning the estrus and the ovulation. The lack of eCG in Group I caused this protocol to be less efficacious in induction and synchronization of estrus and ovulation. The Control Group had a greater synchronization of estrus and ovulation.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study aimed to compare conception rates at the postpartum period (PPP) in beef cows which were administered either Equine Chorionic Gonadotrophin (eCG) or Estradiol Benzoate (EB) after Norgestomet and submitted to fixed-time artificial insemination (FTAI). The hypothesis was that the administration of eCG or EB enhances the conception rate. Lactating Nelore cows (n=138) and Brangus (n = 63), between 26 and 118 days of post partum period (PPP) were divided into three homogeneous groups, and subdivided in two blocks, inside each group one of them with a PPP d'' 45 days (PPP1; n=107) and another with a PPP > 45 days (PPP2; n=94). All cows received an auricular implant containing 3mg Norgestomet (Crestar®), followed by the administration of 5mg Estradiol Valerate. The auricular implants were kept during 10 days. Cows received 1mL saline solution (n=68, Control Group) or 500IU eCG (Folligon®; n=67; eCG Group) or 1mg Estradiol Benzoate (Index, n=66; EB Group) 24 hours after the removal of the implant. FTAI was made 54 hours after the implant removal. The pregnancy diagnosis was carried through ultrasonography 30 days after FTAI. There was an interaction between treatments and PPP. In the PPP1, the conception rate was higher in the eCG Group than in the EB Group (47.22% vs. 15.38%; Pd''0.01). In the PPP2, the conception rates of the eCG and EB Groups were higher than in the Control Group (41.93%, 44.44% vs. 22.22%: Pd''0.01). It was concluded that in cows up to 45 days of PPP, the eCG associated with Norgestomet enhances the conception rates.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Objective: To evaluate the influence of different air abrasion protocols on the surface roughness of an yttria-stabilized polycrystalline tetragonal zirconia) (Y-TZP) ceramic, as well as the surface topography of the ceramic after the treatment. Method: Fifty-four specimens (7.5×4×7.5mm) obtained from two ceramic blocks (LAVA, 3M ESPE) were flattened with fine-grit sandpaper and subjected to sintering in the ceramic system's specific firing oven. Next, the specimens were embedded in acrylic resin and the surfaces to be treated were polished in a polishing machine using sandpapers of decreasing abrasion (600- to 1,200-grit) followed by felt discs with 10μm and 3μm polishing pastes and colloidal silica. The specimens were then randomly assigned to 9 groups, according to factors particle and pressure(n=6): Gr1- control; Gr2- Al 2O 3(50μm)/2.5 bar; Gr3- Al 2O 3(110μm)/2.5 bar; Gr4- SiO 2(30μm)/2.5 bar; Gr5- SiO 2(30μm)/2.5 bar; Gr6- Al 2O 3(50μm)/3.5 bar; Gr7- Al2O3(110μm)/3.5 bar; Gr8- SiO 2(30μm)/3.5 bar; Gr9- SiO 2(30μm)/3.5 bar. After treatments, surface roughness was analyzed by a digital optical profilometer and the morphology was examined by scanning electron microscopy (SEM). Data (μm) were subjected to statistical analysis by Dunnett's test (5%), two-way ANOVA and Tukey's test (5%). Results: The type of particle (p=0.0001) and the pressure (p=0.0001) used in the air abrasion protocols influenced the surface roughness values among the experimental groups (ANOVA). The mean surface roughness values (μm) obtained for the experimental groups (Gr2 to Gr9) were, respectively: 0.37 D; 0.56 BC; 0.46 BC; 0.48 CD; 0.59 BC; 0.82 A; 0.53B CD; 0.67 AB. The SEM analysis revealed that Al 2O 3, regardless of the particle size and pressure used, caused damage to the surface of the specimens, as it produced superficial damages on the ceramic, in the form of grooves and cracks. Conclusion: Al2O3 (110 μm/3.5 bar) air abrasion promoted the highest surface roughness on the ceramics, but it does not mean that this protocol promotes better ceramic-cement union compared to the other air abrasion protocols.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Medicina Veterinária - FMVZ

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)