Mapping oil spill environmental sensitivity in cardoso island state park and surroundings areas, São Paulo, Brazil

This study presents an environmental oil spill sensitivity map of Cardoso Island State Park, located in São Paulo state, Brazil, including some of its surrounding areas. This map was designed following the procedures determined by the Brazilian Federal Environment Organ (Ministry of the Environment), which separates coastal habitats in different littoral sensitivity indexes (LSI) to oil spills. We have also analysed some seasonal variations in morphologic and textural parameters at the local marine beaches that could affect their sensitivity, having found that they are more sensitive during summer due to a wider foreshore zone during these periods. Local most sensitive habitats are estuarine mangroves (LSI 10) and estuarine mud banks (LSI 9). Marine beaches were ranked LSI 3, and littoral rocky shores were subdivided in exposed flat rocky shores (LSI 1), boulder rocky shores (LSI 6) and sheltered rocky shores (LSI 8). Due to the elevated sensitivity of an estuarine system in the area, we considered necessary the installation of an Environmental Emergency Centre and the design of an emergency plan for the region in case of an accident resulting in oil spills within its vicinities. (C) 2007 Elsevier Ltd. All rights reserved.

Effect of Urucu oil (Brazilian Amazon) on the biomass of the aquatic macrophyte Eichhornia crassipes (Mart.) Solms (Pontederiaceae)

Os rios e lagos de várzea da província petrolífera de Urucu, na Amazônia Central, são amplamente colonizados por macrófitas aquáticas, que podem ser afetadas por acidentes durante a exploração e o transporte de petróleo. Entre as macrófitas, a espécie flutuante Eichhornia crassipes (aguapé) ocorre abundantemente na região; OBJETIVO: O objetivo desse estudo foi verificar o efeito de diferentes dosagens do petróleo de Urucu (0; 0,5; 1,5 e 3,0 L.m-2) na biomassa viva e morta de E. crassipes e em algumas características físicas e químicas da água; MÉTODOS: O experimento teve oitenta e quatro dias de duração. A cada sete dias foi determinada a biomassa (viva e morta) de E. crassipes e os valores de temperatura, pH, condutividade elétrica e oxigênio dissolvido da água; RESULTADOS: A dosagem de 0,5 L.m-2 foi suficiente para causar mortalidade parcial (48%) em E. crassipes após trinta e cinco dias de exposição ao petróleo. A dosagem de 3,0 L.m-2 causou mortalidade total (100%) em E. crassipes em oitenta e quatro dias de exposição. A decomposição do petróleo e da biomassa morta de E. crassipes provocam a redução do oxigênio dissolvido e do pH, e aumento da condutividade elétrica e de fósforo total na água; CONCLUSÕES: Nós concluímos que um derramamento de petróleo pode provocar mortalidade total em uma população de uma espécie de macrófita, mas não em uma outra. Isto pode alterar a diversidade de espécies de macrófitas na região impactada. No caso de Eichhornia crassipes e Pistia stratiotes, um derramamento de petróleo de Urucu pode favorecer E. crassipes, a espécie menos sensível ao petróleo.

Biosurfactants production by yeasts using soybean oil and glycerol as low cost substrate

Biosurfactants are bioactive agents that can be produced by many different microorganisms. Among those, special attention is given to yeasts, since they can produce many types of biosurfactants in large scale, using several kinds of substrates, justifying its use for industrial production of those products. For this production to be economically viable, the use of residual carbon sources is recommended. The present study isolated yeasts from soil contaminated with petroleum oil hydrocarbons and assessed their capacity for producing biosurfactants in low cost substrates. From a microbial consortium enriched, seven yeasts were isolated, all showing potential for producing biosurfactants in soybean oil. The isolate LBPF 3, characterized as Candida antarctica, obtained the highest levels of production - with a final production of 13.86 g/L. The isolate LBPF 9, using glycerol carbon source, obtained the highest reduction in surface tension in the growth medium: approximately 43% of reduction after 24 hours of incubation. The products obtained by the isolates presented surfactant activity, which reduced water surface tension to values that varied from 34 mN/m, obtained from the product of isolates LBPF 3 and 16 LBPF 7 (respectively characterized as Candida antarctica and Candida albicans) to 43 mN/m from the isolate LPPF 9, using glycerol as substrate. The assessed isolates all showed potential for the production of biosurfactants in conventional sources of carbon as well as in agroindustrial residue, especially in glycerol.

Foot-and-mouth disease in tropical wildlife

This review of foot-and-mouth disease in cloven-hoofed, free-living animals, describes the disease, the wide range of the hosts, the carrier state, and the interrelationship between disease in domestic livestock and wildlife. This information becomes even more crucial to the development of control strategies when linked to the process of pathogenesis and the epidemiology of the disease.

Comparative study of the topical effectiveness of the andiroba oil (Carapa guianensis) and DEET 50% as repellent for Aedes sp

O DEET (N, N-dietil-3-metilbenzamida) é hoje o repelente mais efetivo disponível, porém, seu uso pode apresentar importantes efeitos colaterais tópicos e sistêmicos. Alguns compostos botânicos, como a Andiroba (Carapa guianensis), têm demonstrado propriedades repelentes a um baixo custo e baixa toxicidade. Quatro voluntários hígidos submeteram seus antebraços recobertos com óleo de Andiroba a 100%, DEET 50% (controle positivo), óleo de soja refinado, óleo de Andiroba 15% e na ausência de produtos (controles negativos), diretamente a picadas de fêmeas saudáveis de Aedes sp. Foram aferidos os tempos da primeira e terceira picadas. Os resultados mostraram que a mediana da primeira picada nos antebraços sem produto foi 17.5s e a terceira picada, 40.0s. No óleo de soja, as picadas ocorreram em 60.0s e 101.5s. No óleo de Andiroba 100%, em 56.0s e 142.5s. Com Andiroba 15%, em 63.0s e 97.5s. Usando DEET 50% não houve picadas após 3600s na maioria dos experimentos (p < 0.001 Wilcoxon). O óleo de Andiroba 100% comparado ao óleo de soja, antebraço sem produto e óleo de Andiroba 15%, mostrou discreta superioridade (p < 0.001 Wilcoxon). Concluímos que o óleo puro de Andiroba apresenta efeito repelente discreto contra picada de Aedes sp., sendo significativamente inferior ao DEET 50%.

Soybean Oil and Beef Tallow in Starter Broiler Diets

The objective of this study was to determine the energy values of soybean oil (SBO) and tallow (T) combined in different ratios, and to evaluate their effects on the performance, body composition, and serum lipid levels of starter broilers. In experiment I, a digestibility trial was performed to determine the energy value of the SOB and T mixtures using 100 12 - to 21 -day-old broilers. In experiment II, 930 one-day-old broilers were used. Treatments consisted of the inclusion of 4% SBO and T inclusions at the following ratios: 0:100, 25:75, 50:50, 75:25, 100:0. Each treatment included six replicates. In experiment I, AME and AMEn linearly increased (P<0.01), as SBO participation in the mixture increased. In experiment II, the different lipid ratios quadratically influenced (P<0.01) body weight and weight gain at 21 days of age, increasing up to the ratio of 65.87:34.13. Serum lipids linearly decreased (P<0.05) as SOB inclusion in the diet increased. It was concluded that AME and AMEn of SBO and T at ratios of 0:100, 25:75, 50:50, 75:25, and 100:0 were 7.882 and 7.542, 8.384 and 8.076, 8.701 and 8.385, 8.801 and 8.727, and 9.478 and 9.271 kcal/kg, respectively. The best performance with no detrimental effect on carcass yield was obtained with the mixture of 75% SBO with 25% T. The highest dietary soybean oil level reduced serum lipid levels of 21-day-old broilers.

Structure, properties and applications of rhamnolipids produced by Pseudomonas aeruginosa L2-1 from cassava wastewater

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modelling an expert GIS system based on knowledge to evaluate oil spill environmental sensitivity

Oil spills cause great damage to coastal habitats, especially when rapid and suitable response measures are not taken. Establishing high priority areas is fundamental for the operation of response teams. Under this context and considering the need for keeping all geographical information up-to-date for emergencial use, the present study proposes employing a decision tree coupled with a knowledge-based approach using GIS to assign oil sensitivity indices to Brazilian coastal habitats. The modelled system works based on rules set by the official standards of Brazilian Federal Environment Organ. We tested it on one of the littoral regions of Brazil where transportation of petroleum is most intense: the coast of the municipalities of Sao Sebastiao and Caraguatatuba in the northern littoral of São Paulo state, Brazil. The system automatically ranked the littoral sensitivity index of the study area habitats according to geographical conditions during summer and winter; since index ranks of some habitats varied between these seasons because of sediment alterations. The obtained results illustrate the great potential of the proposed system in generating ESI maps and in aiding response teams during emergency operations. (C) 2009 Elsevier Ltd. All rights reserved.

Screening and confirmation of PAHs in vegetable oil samples by use of supercritical fluid extraction in conjunction with liquid chromatography and fluorimetric detection

A fast, simple, non-destructive method for the direct screening of polycyclic aromatic hydrocarbons (PAHs) in vegetable oil samples is proposed. The method uses a supercritical fluid extraction (SFE) system coupled on-line with a fluorimetric detector to determine PAHs. This special assembly avoids the main problems encountered in the determination of PAHs in complex matrices such as vegetable oils. PAHs are selectively extracted by using silica gel in the thimble and cleaned up by passage through a C18 column. Interferences are preferentially retained by the silica gel during the SFE process while PAHs are adsorbed in the C18 column and the remainder of the matrix is sent to waste. Finally, the C18 column is purged to remove residual CO2 gas and adsorbed PAHs are recovered by desorption with a solvent. The extracts from positive samples are subsequently analyzed by liquid chromatography (LC) with fluorescence detection. The proposed method allows the confirmation of vegetable oil safety and hence provides a new tool for consumer protection. (C) 2004 Elsevier B.V. All rights reserved.

Effects of olive oil and its minor phenolic constituents on obesity-induced cardiac metabolic changes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Use of soybean oil fry waste for economical biosurfactant production by isolated Pseudomonas aeruginosa using response surface methodology

The present study sought biotensoactive production from soybean oil fry waste using Pseudomonas aeruginosa ATCC 10145 and Pseudomonas aeruginosa isolated from the soil of a petroleum station having undergone gasoline and diesel oil spills. The results of the experiments were analyzed using a complete factorial experimental design, investigating the concentration of soybean oil waste, ammonia sulfate and residual brewery yeast. Assays were performed in 250-mL Erlenmeyer beakers containing 50 mL of production medium, maintained on a rotary shaker at 200 rpm and a temperature of 30±1 °C for a 48-hour fermentation period. Biosurfactant production was monitored through the determination of rhamnose, surface tension and emulsification activity. The Pseudomonas aeruginosa ATCC 10145 strain and isolated Pseudomonas aeruginosa were able to reduce the surface tension of the initial mexlium from 61 mN/m to 32.5 mN/m and 30.0 mN/m as well as produce rhamnose at concentrations of 1.96 and 2.89 g/L with emulsification indices of 96% and 100%, respectively.

Vibration and oil analysis for monitoring problems related to water contamination in rolling

Trying to reduce particle contamination in lubrication systems, industries of the whole world spend millions of dollars each year on the improvement of filtration technology. In this context, by controlling fluid cleanliness, some companies are able to reduce failures rates up to 85 percent. However, in some industries and environments, water is a contaminant more frequently encountered than solid particles, and it is often seen as the primary cause of component failure. Only one percent of water in oil is enough to reduce life expectancy of a journal bearing by 80 percent. For rolling bearing elements, the situation is worse because water destroys the oil film and, under the extreme temperatures and pressures generated in the load zone of a rolling bearing element, free and emulsified water can result in instantaneous flash-vaporization giving origin to erosive wear. This work studies the effect of water as lubricant contaminant in ball bearings, which simulates a situation that could actually occur in real systems. In a designed bench test, three basic lubricants of different viscosities were contaminated with different contents of water. The results regarding oil and vibration analysis are presented for different bearing speeds.

Ultra-structural mapping of sugarcane bagasse after oxalic acid fiber expansion (OAFEX) and ethanol production by Candida shehatae and Saccharomyces cerevisiae

Background: Diminishing supplies of fossil fuels and oil spills are rousing to explore the alternative sources of energy that can be produced from non-food/feed-based substrates. Due to its abundance, sugarcane bagasse (SB) could be a model substrate for the second-generation biofuel cellulosic ethanol. However, the efficient bioconversion of SB remains a challenge for the commercial production of cellulosic ethanol. We hypothesized that oxalic-acid-mediated thermochemical pretreatment (OAFEX) would overcome the native recalcitrance of SB by enhancing the cellulase amenability toward the embedded cellulosic microfibrils. Results: OAFEX treatment revealed the solubilization of hemicellulose releasing sugars (12.56 g/l xylose and 1.85 g/l glucose), leaving cellulignin in an accessible form for enzymatic hydrolysis. The highest hydrolytic efficiency (66.51%) of cellulignin was achieved by enzymatic hydrolysis (Celluclast 1.5 L and Novozym 188). The ultrastructure characterization of SB using scanning electron microscopy (SEM), atomic force microscopy (AFM), Raman spectroscopy, Fourier transform-near infrared spectroscopy (FT-NIR), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) revealed structural differences before and after OAFEX treatment with enzymatic hydrolysis. Furthermore, fermentation mediated by C. shehatae UFMG HM52.2 and S. cerevisiae 174 showed fuel ethanol production from detoxified acid (3.2 g/l, yield 0.353 g/g; 0.52 g/l, yield, 0.246 g/g) and enzymatic hydrolysates (4.83 g/l, yield, 0.28 g/g; 6.6 g/l, yield 0.46 g/g). Conclusions: OAFEX treatment revealed marked hemicellulose degradation, improving the cellulases ability to access the cellulignin and release fermentable sugars from the pretreated substrate. The ultrastructure of SB after OAFEX and enzymatic hydrolysis of cellulignin established thorough insights at the molecular level. © 2013 Chandel et al; licensee BioMed Central Ltd.

Heterogeneous catalysis afford biodiesel of babassu, castor oil and blends

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)