Caracterização técnica e desempenho hidráulico de quatro gotejadores autocompensantes utilizados no Brasil

This study aimed to characterize and evaluate the performance of four models self-compensating drippers commonly used in drip irrigation systems in Brazil. To perform the study it was taking a sample of 25 emitters of each model. Evaluating their tubes (b) coefficient of manufacturing variation (c) wall thickness, (d) characteristic equation of the dripper, (e) internal diameter of the pipe, (f) spacing between emitters, (g) resistance water pressure at ambient temperature and to 40°C and (h) the tensile strength of the pipe with tension of 160 N and 180 N. The analysis showed variation coefficient of less than 0.045 for all manufacturing drippers (0.07 is maximum according to ABNT NBR ISO 9261). The exponents x of the equation pressure versus discharge ranged from 0.0082 to 0.0691 classifying them as self-compensating. From the results obtained it is clear that the tested products which are used in Brazil and used by irrigators had a satisfactory hydraulic performance in accordance with the standard.

Conformidade ergonômica dos controles no posto de trabalho do operador de trator: estudo de caso NH 7630

This article discusses an ergonomic analysis of the controls used by tractor operators, covering their positions in relation to the casing of your job. Was performed an assessment of the controls of the job of a model NH 7630 tractor average power of 74 kW (100 CV), using the norms of the ABNT. With this screening could detect the positive and negative. Then was accomplished an analytical study of the controls. Evaluation results show that some controls of tractors have errors evaluated in relation to NBR/ ISO 6682.

Impacto da ABNT NBR 15575 na qualidade da construção civil

The quality in construction is increasingly a concern in this sector, in view of the occurrence of problems in civil works, even when a contractor is certified by ISO 9001. The ISO 9001 certification does not ensure the maintenance of quality because it only establishes the requirements for a quality management system (QMS) to ensure standardization of processes and products. With the development of ISO 15575, standard performance, the builders took on a quality parameter with the requirements established by this Standard, which must be met. Thus, the implementation of a quality management system (QMS) becomes essential, showing users the concern for quality. This study aimed to verify, through a case study, the impact of NBR 15575 quality construction and how that standard of performance may be the key element of ISO 9001 to ensure quality maintenance of civil works

Does ISO 14001 work in Brazil?

As a result of increasing global awareness about the importance of the environment, depletion of natural resources and legal pressures for companies to manage their processes in a sustainable manner, ISO 14001 systems have been gaining increasingly more importance in the organizational scenario. These elements are even more critical in emerging nations due to less awareness and fewer demands by governments and the population in relation to environmental issues. Therefore, the main objective of this study is to verify the benefits and difficulties of Environmental Management Systems based on ISO 14001 at industries in the state of São Paulo - Brazil (an emerging country) by conducting a survey to subsidize the proposal for actions in the public, academic and private sectors to promote the use of this standard of reference and strengthen its results in Brazil. A questionnaire was sent to 194 companies from the National Institute of Metrology, Standardization and Industrial Quality database. 69 answered, representing a return rate of 35.36%. The main benefits identified are related to the development of preventive environmental actions, reduction in the consumption of power, water, gas and fuel oil, and a positive influence on other internal management processes. The main difficulties are related to cost increases from ISO 14001 management systems and the constant changes in environmental legislation in Brazil. Some actions are proposed at the end of the analyses to intensify the use and improve the results of this standard, such as changes in government legislation and its collective development and implementation in industries. (C) 2010 Elsevier Ltd. All rights reserved.

Best practices for the implantation of ISO 14001 norms: a study of change management in two industrial companies in the Midwest region of the state of São Paulo - Brazil

Among the difficulties found in the implementation of ISO 14001 systems, resistance to change can always be found. It is mainly a consequence of the hurry to change, loss of focus, concentration of decision making at the level of top management, arbitrary imposition of objectives and results, faulty communication, and the absence of motivational and financial incentive for change.Therefore, the main objective of this paper is to present best practices with respect to the management of organizational change due to the implementation of ISO 14001 norms in two industrial companies in the Midwest region of the State of São Paulo - Brazil. (C) 2008 Elsevier Ltd. All rights reserved.

Estudo da série iso-eletrônica do átomo de hélio pelo método hiperesférico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Treinamento ambiental em organizações com certificação ISO 14001: estudo de múltiplos casos e identificação de coevolução com a gestão ambiental

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Implantação de sistemas de gestão ambiental ISO 14001: uma contribuição da área de gestão de pessoas

Os sistemas certificáveis de gestão ambiental, como a norma ISO 14001, têm sido uma opção cada vez mais utilizada pelas organizações para equacionarem suas demandas ambientais, padronizarem seu processo produtivo, reduzirem custos de produção e melhorarem sua imagem. Entretanto, seu processo de implantação em indústrias gera mudanças significativas na cultura e estrutura destas empresas e devem ser devidamente consideradas por gestores e consultores. Pelo exposto, o principal objetivo deste artigo é apresentar práticas, sistematizadas à luz da teoria com especial contribuição da área de gestão de pessoas e com base em dois estudos de caso, para implantação de sistemas de gestão ambiental ISO 14001 em empresas industriais. Para tanto, foram realizados dois estudos de caso: um em uma empresa de baterias automotivas e outro em uma empresa moveleira. Os dados foram coletados a partir de entrevistas semiestruturadas com os gestores diretamente responsáveis por estes sistemas e com colaboradores-chave, observação in loco e análise de documentos. Ao final do artigo são apresentadas sugestões de práticas relacionadas aos seguintes elementos: alta direção, gestão de pessoas, comitê de gestão ambiental, missão e políticas, treinamento e comunicação.

Avaliação microbiológica da superfície dos implantes ortopédicos metálicos usados para fixar fraturas ósseas

In the majority of cases of bone fracture requiring surgery, orthopedic implants (screw-plate and screw) are used for osteosynthesis and the infections associated with such implants are due to the growth of microorganisms in biofilms. The objective of this study was to identify microorganisms recovered from osteosynthesis implants used to fix bone fractures, to assess the viability of the cells and the ability of staphylococci to adhere to a substrate and to determine their sensitivity/resistance to antimicrobials. After surgical removal, the metal parts of austenitic stainless steel (ASTM F138/F139 or ISO NBR 5832-1/9) were transported to the Laboratory of Clinical Microbiology, washed in buffer and subjected to ultrasonic bath at 40±2 kHz for 5 minutes. The sonicated fluid was used to seed solid culture media and cell viability was assessed under the microscope by with the aid of a fluorescent marker. The production of extracellular polysaccharide by Staphylococcus spp. was investigated by means of adhesion to a polystyrene plate. The profile of susceptibility to antimicrobials was determined by the disk diffusion assay. The most frequently isolated bacteria included coagulase-negative Staphylococcus resistant to erythromycin, clindamycin and oxacillin. Less frequent were Pseudomonas aeruginosa resistant to trimethoprim/sulfamethoxazole and ampicillin, Acinetobacter baumannii resistant to ceftazidime, Enterobacter cloacae resistant to cephalothin, cefoxitin, cefazolin, levofloxacin and ciprofloxacin, Bacillus spp. and Candida tropicalis. The observation of slides by fluorescence microscope showed clusters of living cells embedded in a transparent matrix. The test for adherence of coagulase-negative Staphylococcus to a polystyrene plate showed that these microorganisms produce extracellular polysaccharide. In conclusion, the metal parts were colonized by bacteria related to orthopedic implant infection, which were resistant to multiple antibiotics.

Avaliação de tubos de concreto reforçados com fibras de aço segundo a NBR 8890

Pós-graduação em Engenharia Civil - FEIS

Um estudo sobre a relação do sistema de gestão ambiental ISO 14001 com a adoção de procedimentos de produção mais limpa em empresas industriais brasileiras

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Um estudo sobre a relação entre o sistema de gestão da qualidade ISO 9001 e a inovação em empresas industriais do Estado de São Paulo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Um estudo sobre as boas práticas e principais dificuldades na implantação de um sistema de gestão de qualidade com base na ISO 9001 e seus reflexos na área ambiental

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Um estudo sobre os benefícios e dificuldades da gestão ambiental com base na Norma ISO 14001 em empresas industriais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)