Qualitative and quantitative characterization of aluminium alloys after corrosion testing

The 2024 and 7050 aluminium alloys used as aircraft components were subjected to laboratory corrosion tests in sodium chloride solution, Light-microscope examinations make it possible to characterise morphological aspects of the localised corrosion. Image analysis was used to determine both depth and width of pits over corroded surfaces. It has been concluded that the annealing could reduce the pit growth in both alloys, by means of grains recrystallization or recovery. The 2024 alloy also tends to present an exfoliation mechanism, mainly throughout non-recrystallized and recrystallized grain boundaries, increasing the width and sustaining the depth of pit cavities during exposition to saline atmosphere. SEM and EDS analysis reveal the morphology and elemental distribution of the corrosion products formed after immersion corrosion test. Some of these products were identified by X-ray diffraction analysis. For 2024, Al(OH)(3), MS(OH)(2) and Cu2O were found. AI(OH)(3) and Cu2O were also found in 7050 samples.

PREPARATION and CHARACTERIZATION of CELLULOSE/HYDROUS NIOBIUM PHOSPHATE HYBRID

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

SUGARCANE BAGASSE PULPING and BLEACHING: THERMAL and CHEMICAL CHARACTERIZATION

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quantitative microscopy characterization of hydrous niobium phosphate into bleached cellulose

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Three-Dimensional Characterization of Pores in Ti-6Al-4V Alloy

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Epidemiology, clinical signs, histopathology and molecular characterization of canine leproid granuloma: a retrospective study of cases from Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Histological Characterization and Immunohistochemical Localization of Ki-67 and VEGF Factors in Bitches' Corpus Luteum at Cyclic and Early and Late Gestational Diestrous

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mechanical and biological characterization of resin-modified glass-ionomer cement containing doxycycline hyclate

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization and in vitro evaluation of bacterial cellulose membranes functionalized with osteogenic growth peptide for bone tissue engineering

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cytogenetic characterization of distinct B chromosomes in a population of the fish Astyanax bockmanni (Teleostei, Characiformes)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural characterization of 0.5PbMg(1/3)Nb(2/3)O(3)-0.5Ba(x)Pb((1-x))TiO(3) powders

The present work reports the effects caused by barium on phase formation, morphology and sintering of lead magnesium niobate-lead titanate (PMN-50PT). Ab initio study of 0.5PbMg(1/3)Nb(2/3)O(3)-0.5Ba(x)Pb((1-x))TiO(3) ceramic powders, with x = 0, 0.20, and 0.40 was proposed, considering that the partial substitution of lead by barium can reestablish the equilibrium of monoclinic-tetragonal phases in the system. It was verified that even for 40 mol% of barium, it was possible to obtain pyrochlore-free PMN-PT powders. The increase of the lattice parameters of PMN-PT doped-powders confirmed dopant incorporation into the perovskite phase. The presence of barium improved the reactivity of the powders, with an average particle size of 120 nm for 40 mol% of barium against 167 mn for the pure sample. Although high barium content (40 mol%) was deleterious for a dense ceramic, contents up to 20 mol% allowed 95% density when sintered at 1100 degrees C for 4 h. (c) 2007 Elsevier Ltd. All rights reserved.

Morphological, histological, and ultrastructural characterization of degenerating salivary glands in females of the cattle-tick Rhipicephalus (Boophilus) microplus (CANESTRINI, 1887) (Acari : Ixodidae)

The present study describes the morphology and ultrastructure of the salivary glands of semi-engorged females of the southern cattle-tick Rhipicephalus (Boophilus) microplus. The acini that compose these glands, at that specific feeding stage, show cells featuring degenerative process of the salivary glands, such as: vacuolated cytoplasm, condensed chromatin, fragmented nuclei, and presence of apoptotic bodies. In addition, the presence of microorganisms was detected, with morphology typical of protozoa, inside these organs. (c) 2005 Elsevier Ltd. All rights reserved.

Venom gland of Pachycondyla striata worker ants (Hymenoptera : Ponerinae). Ultrastructural characterization

Morphological data concerning the venom gland of worker ants of Pachycondyla striata revealed that this gland consists of three distinct regions: an external secretory portion, composed by a secretory filament that bifurcates in order to give rise to other two filaments; an internal secretory portion, represented by the convoluted gland; and a storage portion, represented by a sac-shaped reservoir. The ultrastructural analysis showed that the reservoir is enveloped by a simple pavementous epithelium, coated internally with a cuticle. The external secretory portion is composed by cells forming a simple cubic epithelium, in which the apical portion presents numerous microvilli while the basal portion of the cells shows infoldings of the plasma membrane containing numerous mitochondria. The convoluted gland possesses cells of irregular morphology with nuclei containing condensed chromatin, suggesting inactivity. However, these cells are in fact undergoing secretory activity, which is probably added to the final secretion produced by the gland. The cytoplasm of these cells contains several elements distributed therein, such as ribosomes and polyribosomes, lipid droplets, and protein inclusions in the form of crystals, thus Suggestive of protein storage, which would be used by the insect when metabolically required. (c) 2005 Elsevier Ltd. All rights reserved.

Morphological characterization of the ovary and vitellogenesis dynamics in the tick Amblyomma cajennense (Acari : Ixodidae)

In this work we describe the internal morphology of the female reproductive system of the cayenne tick Amblyomma cajennense. This system is represented by a panoistic ovary, which lacks nurse cells in the germarium. This ovary consists of a single tube, in which a large number of oocytes develop asynchronously, thus accompanying the processes of yolk deposition in the oocytes. The oocytes were classified into stages that varied from I to V, according to: cytoplasm appearance, presence of the germ vesicle, presence of yolk granules, and presence of chorion. The study of vitellogenesis dynamics suggest that the yolk elements are deposited in the oocyte following a preferencial sequence, in which the lipids are the first to appear, followed by proteins an finally by the carbohydrates. In this way the yolk of A. cajennense ticks have these three elements that may be free in the cytoplasm or chemically bounded forming glycoprotein or lipoprotein complexes. (C) 2004 Elsevier B.V. All rights reserved.

Morphological characterization of the ovary and oocytes vitellogenesis of the tick Rhipicephalus sanguineus (Latreille, 1806) (Acari : Ixodidae)

This study presents the morphology of the ovary, as well as the process of the vitellogenesis in oocytes of the tick Rhipicephalus sanguineus. The ovary of these individuals is of the panoistic type; therefore, it lacks nurse cells. This organ consists of a single tubular structure, continuous, and composed of a wall formed by small epithelial cells with rounded nuclei which delimit the lumen. The oocytes in the different developmental stages in this tick species were classified into five stages (I V). They remain attached to the ovary during vitellogenesis by a cellular pedicel and afterwards the mature oocytes (stage V) are released into the ovary lumen. (c) 2005 Elsevier B.V. All rights reserved.