57 resultados para MIM
Resumo:
Argilas de interesse da indústria de cerâmica estrutural foram caracterizadas. Algumas propriedades físicas de diversas massas cerâmicas, preparadas a partir de material coletado em depósitos artificiais, também foram analisadas. Todas as massas investigadas exibem alta concentração de componentes finos (< 2 mim) e considerável grau de plasticidade, o que é compatível com a presença de elevado teor de argilominerais. Corpos de prova cerâmicos foram preparados por prensagem a seco e queimados em temperaturas ao redor de 855 °C. Os parâmetros resistência mecânica à flexão, retração linear, absorção de água, cor aparente e perda de peso foram medidos. Como resultado, as aplicações industriais destas matérias primas foram analisadas e revistas, bem como novas aplicações foram propostas.
Resumo:
We report 18 new laser lines from (CH3OH)-C-13 generated in an optically pumped far-infrared laser; the laser lines are in the range of 54.2-420 mu m and are all characterized in wavelength, polarization relative to the pumping CO2 radiation, and pump offset relative to the CO2 center frequency, the frequencies of seven of these new lines along with 10 previously reported lines were measured by an accurate heterodyne technique, mixing them in a metal-insulator-metal (MIM) point contact diode, with another laser line of known frequency.
Resumo:
Thin films of lithium niobate were deposited on the Pt/Ti/SiO2 (111) substrates by the polymeric precursor method (Pechini process). Annealing in static air and oxygen atmosphere was performed at 500°C for 3 hours. The films obtained were characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The dielectric constant, dissipation factor and resistance were measured in frequency region from 10 Hz to 10 MHz. Electrical characterizations of the films pointed to ferroelectricity via hysteresis loop. The influence of oxygen atmosphere on crystallization and properties of LiNbO3 thin films is discussed.
Resumo:
Starches and modified starch derivations are used as carriers in the spray drying processing where apparent density is an important characteristic and should be controlled in dehydrated products for pharmaceutical use. In Brazil, the commercial starches are made from corn and cassava, but there are others with potential for extraction. The canna and taro starches were selected because they represent the extremes of granule size and thus allow the effect of this size on the apparent density of spray dried products to be tested. For comparison, commercial cassava and corn starches which are used in spray-drying and have granules of intermediate size, were also tested. The spray-drying process was carried out with a LabPlant SD 04 Spray Dryer, operating at a pressure of 6 lb/in2, air of 7,6 mL/minute, and 1 cm atomizing nozzle. The air inlet temperature was set at 200°C this model does not allow regulating outlet temperature. The spray-dryer products had boldo leaf extract as base, using the four starches as carrier. The dry product was evaluated for humidity, water activity (Aw), granulometry and apparent density. The results showed that the size of the particles, which was a consequence of the size of the starch granules, influenced the apparent density of the spray dried products, which as higher (694, 27 g/mL) for the canna starch and lower (456, 13 g/mL) for taro starch. Corn and cassava starches showed very close and intermediate values, 521,51 and 58,48 g/mL, which also represent the standard range of starch granule size.
Resumo:
Background Post-transplant anemia is multifactorial and highly prevalent. Some studies have associated anemia with mortality and graft failure. The purpose of this study was to assess whether the presence of anemia at 1 year is an independent risk factor of mortality and graft survival. Methods All patients transplanted at a single center who survived at least 1 year after transplantation and showed no graft loss (n = 214) were included. Demographic and clinical data were collected at baseline and at 1 year. Patients were divided into two groups (anemic and nonanemic) based on the presence of anemia (hemoglobin<130 g/l in men and 120 g/l in women). Results Baseline characteristics such as age, gender, type of donor, CKD etiology, rejection, andmismatches were similar in both groups. Creatinine clearance was similar in both anemic and nonanemic groups (69.32 ± 29.8 × 75.69 ± 30.5 ml/mim; P = 0.17). A Kaplan- Meier plot showed significantly poorer death-censored graft survival in the anemic group, P = 0.003. Multivariate analysis revealed that anemic patients had a hazard ratio for the graft loss of 3.85 (95% CI: 1.49-9.96; P = 0.005). Conclusions In this study, anemia at 1 year was independently associated with death-censored graft survival and anemic patients were 3.8-fold more likely to lose the graft. © 2010 Springer Science+Business Media, B.V.
Resumo:
Pós-graduação em Artes - IA
Resumo:
Pós-graduação em Artes - IA
Resumo:
Pós-graduação em Artes - IA
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Educação - IBRC
Resumo:
Pós-graduação em Educação para a Ciência - FC
Resumo:
Pós-graduação em Educação Matemática - IGCE
Resumo:
Pós-graduação em Educação - FFC
Resumo:
Pós-graduação em Estudos Linguísticos - IBILCE
Resumo:
Pós-graduação em Música - IA