Surface finishing of glass ionomer

Purpose: To evaluate the surface roughness and staining of a glass ionomer cement when subjected to different finishing procedures. Materials and Methods: Sixty-four discs of Chem-Fil II glass ionomer cement were submitted to staining test with methylene blue by spectrophotometry and roughness test by profilometry. Four groups were evaluated: Mylar matrix (control), Sof-Lex discs, Enhance points, and diamond bur. Results: Staining and roughness test, analyzed by ANOVA and Tukey's test, showed that the best surface was obtained when the material cured in contact with the Mylar matrix strip or when treated with Sof-Lex discs. The poorest results were obtained after using the diamond bur.

Regeneração da vegetação arbórea nativa no sub-bosque de um povoamento de Eucalyptus saligna Smith. Localizado no Estado de São Paulo

This study evaluate the native species naturally regenerating in Eucalyptus saligna stand understory. This stand is located at Itatinga Experimental Station, of the Forest Sciences Department (ESALQ/USP). The experimental area encompasses two sites separated from each other around 250 m, differing 30 m in altitude. These two sites are different mainly in land slope and soil fertility and soil hydric retention capacity. Eight permanent plots of 625 m2 in each site were randomly sampled. The woody species Individuals with height equal or bigger than 1,5 m and the Eucalyptus saligna coppicings were surveyed in each plot. A total of 107 species were Identified and 7 species were common to both sites, distributed into 72 genera and 34 families. Based upon the results It is possible to conclude that the Eucalyptus saligna trees do not preclude the natural regeneration of the native species in the stand understory, however the floristic structure of the community is also influenced by edaphic factors and vicinity of seed sources.

Ecological interaction between Atta sexdens (Hymenoptera: Formicidae) and the vegetation of a mesophyll semideciduous forest fragment in Botucatu, SP, Brazil

Among 89 plants species growing in a subtropical dry forest fragment located in Botucatu, State of São Paulo, Brazil, 35 species were cut by Atta sexdens, representing 39.34% of the current plants existing in this area. A. sexdens L., 1758 (Hymenoptera: Formicidae) has a selective preference for the following species: Alchornea triplinervia, Faramea cyanea, Cariniana estrellensis and Casearea obliqua, with the first being the most cut species. The frequency and absolute densities of the plant families and species significantly influence the selection process. When comparing the absolute frequency regarding the 10 most cut plant species and the cutting frequency, significant data were obtained only for the euphorbiaceous A. triplinervia species, proving the preference of A. sexdens for this species in particular. These interactions are discussed based on ecological and management factors in agro-ecosystems.

Surface roughness of packable composite resins polished with various systems

Purpose: The aim of this study was to evaluate the surface roughness of four packable composite resins, SureFil™ (Dentsply, Petrópolis, Rio de Janeiro, Brazil), Prodigy Condensable™ (Kerr Co., Orange, CA, USA), Filtek P60™ (3M do Brasil, São Paulo, Brazil), and ALERT® (Jeneric/Pentron, Inc., Wallingford, CT, USA) and one microhybrid composite resin (Filtek Z250™, 3M do Brasil) after polishing with four finishing systems. Materials and Methods: Twenty specimens were made of each material (5 mm in diameter and 4 mm high) and were analyzed with a profilometer (Perthometer® S8P, Perthen, Mahr, Germany) to measure the mean surface roughness (Ra). The specimens were then divided into four groups according to the polishing system: group 1 - Sof-Lex™ (3M do Brasil), group 2 - Enhance™ (Dentsply), group 3 - Composite Finishing Kit (KG Sorensen, Barueri, São Paulo, Brazil), and group 4 - Jiffy Polisher Cups® (Ultradent Products, Inc., South Jordan, UT, USA). The specimens were polished and then evaluated for Ra, and the data were subjected to analysis of variance, analysis of covariance, and Tukey's test (p = .05). Results: The mean Ra of SureFil polished with Sof-Lex was significantly lower than that of KG points. Prodigy Condensable polished with Enhance showed a significantly less rough surface than when polished with Sof-Lex. Filtek P60 did not exhibit a significant difference with the various polishing systems. For ALERT the lowest mean Ra was obtained with Sof-Lex and the highest mean Ra with KG points. Regarding Filtek Z250, polishing with KG and Jiffy points resulted in a significantly lower mean Ra than when polished with Enhance. Conclusions: Packable composite resins display variable roughness depending on the polishing system used; the Sof-Lex disks and Jiffy points resulted in the best Ra values for the majority of the materials tested.

Reproductive phenology of Atlantic forest tree species in Brazil: An eleven year study

This paper describes the reproductive phenorhythms of tree species in a tropical seasonal lowland forest in Southeastern Brazil. Every two weeks, five individuals of 41 species were observed for the occurrence of flowering and fruiting, from May 1982 to December 1992. All phenophases showed high seasonality, when considering the whole set of species, but the amplitude of the cycles was much more variable between years; only 13 species had regular flowering. Infra-annual flowering and fruiting were found in 11 and four species, respectively, while only one species flowered and fruited continually. Supra-annual cycles were observed in four (flowering) and seven (fruiting) species. An increase was observed in number of species and individuals flowering and fruiting from 1990 to 1992, following mainly an elevation in the absolute minimum air temperature. These data suggest a relationship between reproductive phenology and major climatic phenomena like El Niño events and solar activity cycles. © International Society for Tropical Ecology.

In vitro evaluation of surface roughness of 4 resin composites after the toothbrushing process and methods to recover superficial smoothness.

OBJECTIVE: This study evaluated the efficiency of repolishing, sealing with surface sealant, and the joining of both in decreasing the surface roughness of resin-based composites after a toothbrushing process. METHOD AND MATERIALS: Ten specimens of each composite (Alert, Z100, Definite, and Prodigy Condensable), measuring 2 mm in thickness and 4 mm in diameter, were made and submitted to finishing and polishing processes on both sides of the specimens using the Sof-Lex system. The specimens were then subjected to toothbrushing (30,000 cycles), and surface roughness (Ra) was analyzed with a Surfcorder SE 1700 profilometer. The upper surface of each composite was etched with 37% phosphoric acid, and the surface-penetrating sealant Protect-it was applied on 1 surface. The roughness of these surfaces was again measured. On the other side, the surface of the specimen was repolished, and the efficiency of this procedure was measured using the profilometer. The surface roughness resulting from the joining of the 2 methods was verified by applying, in the final stage, the surface-penetrating sealant on the repolished surface. Data were analyzed with analysis of variance and Tukey test (P <.05). RESULTS: Results showed that the lowest surface roughness values were obtained for Definite, Z100, and Prodigy Condensable after the repolishing process and after the repolishing plus sealing. For Alert, the joining of repolishing plus sealing promoted the lowest values of surface roughness. CONCLUSION: Of the resin-based composites, Alert demonstrated the highest values of surface roughness in all the techniques tested.

Soil seed banks in tropical forest fragments with different disturbance histories in southeastern Brazil

Soil seed banks are considered an important mechanism for natural regeneration in tropical forest ecosystems. This paper investigated the soil seed bank in two semideciduous seasonal tropical forest fragments with different disturbance histories in Botucatu, southeastern Brazil. In each study site, 40 superficial soil samples (30 cm × 30 cm × 5 cm) were taken at the end of both the dry and rainy seasons. The seeds were estimated by the germination method. Average soil seed density was 588.6 and 800.3 seeds m-2, respectively, for site 1 (less disturbed) and site 2 (more disturbed). Seed density and diversity (H′) were significantly higher in site 2 in both seasons. Non-woody taxa predominated in both fragments, but pioneer tree species were better represented in the less disturbed forest. Both ecosystems have a potential for regeneration from soil seed banks, but this potential is higher in the less disturbed site. Low richness and density of pioneer tree species in the seed bank indicate that the ecosystem has lost its resilience. The seed bank is not as important in these ecosystems as in other forests. Results indicate that management strategies to restore these forests should take into account the possibility of recovering soil seed bank processes and dynamics. © 2007 Elsevier B.V. All rights reserved.

Regeneração natural de espécies da Mata Atlǎntica em sub-bosque de Eucalyptus saligna Smith. em uma antiga unidade de produção forestal no Parque das Neblinas, Bertioga, SP

This study aimed at characterizing the potential for natural regeneration of native vegetation in the under-story of an earlier Eucalyptus saligna Smith production stand. The study was carried out at the Parque das Neblinas, Bertioga municipality, SP, in a 45 ha third rotation stand; which had been abandoned 15 years ago for natural regeneration to occur. The sampling was done in 24 plots of 20 × 40 m. The sampled area was of 19,200 m2, with inventory made of 100% of the eucalyptus trees. All regeneration trees with a height ≥ 1.30 m and DBH ≥ 5.0 cm were measured, as well as adult individuals with DBH ≥ 5.0 cm; surveyed in two size classes. 1,417 individuals of E. saligna were measured, with a density of 738,02 individuals/ha and a basal area of 22.69 m2/ha. Among 2,763 natural regeneration individuals, 111 species belonged to 66 genera and 34 botanical families. The species represented 43.7% of the tree richness of neighboring native forest fragments. The total estimated density and the basal area were respectively 1,052.6 individuals/ha and 6.4 m2/ha of autochthonous trees with DBH ≥ 5.0 cm (Class 1); while for regeneration there were 3,864.58 individuals/ha, and 2.76 m2/ha of individuals with a height ≥ 1.30 m and DBH < 5.0 cm (Class 2). Shannon diversity (H') was 2.83 and 3.68, respectively, for Classes 1 and 2, and the corrected species richness for a 1000-individual sample (R1000) were 75.6 and 87.29 (Fisher's a index) for the same classes. The majority of the species (34.84%) was typical from the understory of wet tropical forest and had zoochoric fruit dispersal (67.57%). The results indicate that, under these conditions, a eucalyptus forest is able to provide adequate regeneration niches for native vegetation, and may represent a sink habitat for local populations.

A restauração ecológica em destaque: Um retrato dos últimos vinte e oito anos de publicações na área

The main aspects of restoration, in various ecosystems, are here discussed, by means of a bibliographic analysis of the last twenty-eight years. The main concepts, research themes and target ecosystems are also described.

Dinámica del suelo y estoque de carbono después de diez años de la restauración de tierras degradadas usando especies arbóreas del bosque atlántico

Brazil's Atlantic Forest ecosystem has been greatly affected by land use changes, with only 11.26% of its original vegetation cover remaining. Currently, Atlantic Forest restoration is receiving increasing attention because of its potential for carbon sequestration and the important role of soil carbon in the global carbon balance. Soil organic matter is also essential for physical, chemical and biological components of soil fertility and forest sustainability. This study evaluated the potential for soil recovery in contrasting restoration models using indigenous Atlantic Forest tree species ten years after their establishment. The study site is located in Botucatu municipality, São Paulo State-Brazil, in a loamy dystrophic Red-Yellow Argisol site (Typic Hapludult). Four treatments were compared: i) Control (Spontaneous Restoration); ii) Low Diversity (five fast-growing tree species established by direct seeding); iii) High Diversity (mixed plantings of 41 species established with seedlings) and; iv) Native Forest (well conserved neighboring forest fragment). The following soil properties were evaluated: (1) physical-texture, density and porosity; (2) chemical-C, N, P, S, K, Ca, Mg, Al and pH; (3) biological-microbial biomass. Litter nutrient concentrations (P, S, K, Ca and Mg) and C and N litter stocks were determined. Within ten years the litter C and N stocks of the Low Diversity treatment area were higher than Control and similar to those in both the High Diversity treatment and the Native Forest. Soil C stocks increased through time for both models and in the Control plots, but remained highest in the Native Forest. The methods of restoration were shown to have different effects on soil dynamics, mainly on chemical properties. These results show that, at least in the short-term, changes in soil properties are more rapid in a less complex system like the Low Diversity model than in the a High Species Diversity model. For both mixed plantation systems, carbon soil cycling can be reestablished, resulting in increases in carbon stocks in both soil and litter.

Avaliação comparativa in vitro da rugosidade superficial de resinas compostas submetidas a diferentes técnicas de polimento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Contratos internacionais do comércio no direito brasileiro de lege lata de lege ferenda

Pós-graduação em Direito - FCHS

Análise rugosimétrica de duas cerâmicas odontológicas submetidas a diferentes tratamentos de superfície

Pós-graduação em Reabilitação Oral - FOAR

Desenvolvimento e avaliação da efetividade de duas pastas polidoras em padrão nanométrico empregadas a materiais restauradores estéticos: análise comparativa por perfilometria digital e microscopia de força atômica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Perceptions of environmental change and use of traditional knowledge to plan riparian forest restoration with relocated communities in Alcantara, Eastern Amazon

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)