Photodynamic therapy associating Photogem (R) and blue LED on L929 and MDPC-23 cell culture

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Toxicity of photodynamic therapy with LED associated to Photogem (R): An in vivo study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Curing depth of composite resin light cured by LED and halogen light-curing units

The purpose of this study was to evaluate the polymerization effectiveness of a composite resin (Z-250) utilizing microhardness testing. In total, 80 samples with thicknesses of 2 and 4 mm were made, which were photoactivated by a conventional halogen light-curing unit, and light-curing units based on LED. The samples were stored in water distilled for 24 h at 37C. The Vickers microhardness was performed by the MMT-3 microhardness tester. The microhardness means obtained were as follows: G1, 72.88; G2, 69.35; G3, 67.66; G4, 69.71; G5, 70.95; G6, 75.19; G7, 72.96; and G8, 71.62. The data were submitted to an analysis of variance (ANOVA's test), adopting a significance level of 5%. The results showed that, in general, there were no statistical differences between the halogen and LED light-curing units used with the same parameters.

Continuous and gradual photo-activation methods: influence on degree of conversion and crosslink density of composite resins

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Bond strength of Epiphany (TM) Sealer combined with different adhesive systems photo-activated with LED and QTH

The Epiphany (TM) Sealer is a new dual-curing resin-based sealer and has been introduced as an alternative to gutta-percha and traditional root canal sealers. The canal filling is claimed to create a seal with the dentinal tubules within the root canal system producing a 'monoblock' effect between the sealer and dentinal tubules. Therefore, considering the possibility to incorporate the others adhesive systems, it is important to study the bond strength of the resulting cement. Forty-eight root mandibular canines were sectioned 8-mm below CEJ. The dentine discs were prepared using a tapered diamond bur and irrigated with 1% NaOCl and 17% EDTA. Previous the application Epiphany (TM) Sealer, the Epiphany (TM) Primer, AdheSE, and One Up Bond F were applied to the root canal walls. The LED and QTH (Quartz Tungsten Halogen) were used to photo-activation during 45 s with power density of 400 and 720 mW/cm(2), respectively. The specimens were performed on a universal testing machine at a cross-head speed of 1 mm/min until bond failure occurred. The force was recorded and the debonding values were used to calculate Push-out bond strength. The analysis of variance (ANOVA) and Tukey's post-hoc tests showed significant statistical differences (P < 0.05) to Epiphany (TM) Sealer/Epiphany (TM) Primer/QTH and EpiphanyTM Sealer/AdheSE/QTH, which had the highest mean values of bond strength. The efficiency of resin-based filling materials are dependent the type of light curing unit used including the power density, the polymerization characteristics of these resin-based filling materials, depending on the primer/adhesive used.

Effects of neuromuscular electrical stimulation, laser therapy and LED therapy on the masticatory system and the impact on sleep variables in cerebral palsy patients: a randomized, five arms clinical trial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Susceptibility of Candida albicans and Candida dubliniensis to erythrosine- and LED-mediated photodynamic therapy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of erythrosine- and LED-mediated photodynamic therapy on buccal candidiasis infection of immunosuppressed mice and Candida albicans adherence to buccal epithelial cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Hardening of a dual-cure resin cement using QTH and LED curing units

Objective: This study evaluated the surface hardness of a resin cement (RelyX ARC) photoactivated through indirect composite resin (Cristobal) disks of different thicknesses using either a light- emitting diode (LED) or quartz tungsten halogen (QTH) light source. Material and Methods: Eighteen resin cement specimens were prepared and divided into 6 groups according to the type of curing unit and the thickness of resin disks interposed between the cement surface and light source. Three indentations (50 g for 15 s) were performed on the top and bottom surface of each specimen and a mean Vickers hardness number (VHN) was calculated for each specimen. The data were analyzed using two-way ANOVA and Tukey-Kramer test was used for post-hoc pairwise comparisons. Results: Increased indirect resin disk thickness resulted in decreased mean VHN values. Mean VHN values for the top surfaces of the resin cement specimens ranged from 23.2 to 46.1 (QTH) and 32.3 to 41.7 (LED). The LED curing light source produced higher hardness values compared to the QTH light source for 2- and 3-mm-thick indirect resin disks. The differences were clinically, but not statistically significant. Increased indirect resin disk thickness also resulted in decreased mean VHN values for the bottom surfaces of the resin cement: 5.8 to 19.1 (QTH) and 7.5 to 32.0 (LED). For the bottom surfaces, a statistically significant interaction was also found between the type of curing light source and the indirect resin disk thickness. Conclusions: Mean surface hardness values of resin cement specimens decreased with the increase of indirect resin disk thickness. The LED curing light source generally produced higher surface hardness values.

Charge injection in an LED with a hybrid composite as the emissive layer

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Protected cerrado fragments grow up and lose even metapopulational birds in central São Paulo, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

CONTROLE DE Staphylococcus aureus em CHARQUES (JERKED BEEF) POR CULTURAS INICIADORAS

Jerked beef - JB - é um produto cárneo curado, salgado e seco ao sol, derivado de um típico produto cárneo brasileiro - o charque. Ambos carecem de estudos que orientem seu aprimoramento. Staphylococcus spp. têm sido reportado como o gênero predominante na microbiota do produto, o que evidencia o risco de desenvolvimento de linhagens enterotoxigênicas de S. aureus. Foram empregadas duas linhagens inócuas de estafilococos na elaboração de JB, a fim de avaliar sua influência sobre o desenvolvimento de S. aureus por mecanismo competitivo ou pela produção de bacteriocinas. Os resultados demonstraram que ambas inibiram o desenvolvimento do patógeno tanto in vitro como durante o processamento do produto. Não se observou produção de compostos inibitórios pelas linhagens iniciadoras, ficando a explicação para a inibição observada restrita ao mecanismo competitivo. Este trabalho permitiu demonstrar a possibilidade de aumentar a segurança e padronização de JB pelo emprego de culturas bacterianas selecionadas.

Raptors and campo-cerrado bird mixed flock led by Cypsnagra Hirundinacea (Emberizidae:Thraupinae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

O poder e as injustiças nas pesquisas em seres humanos

Após considerações gerais sobre a ética na pesquisa envolvendo seres humanos, focaliza-se a possibilidade de ocorrências de injustiças, sob a égide de diversas formas de poder. Exemplificam-se situações concretas. Enfatiza-se a análise das possíveis injustiças à luz da Bioética, com destaque para multi e transdisciplinaridade. O autor se posiciona quanto às características atuais da Bioética, cuja ótica levou à elaboração das Diretrizes éticas para a pesquisa envolvendo seres humanos, no Brasil (Resolução 196/96 e complementares do Conselho Nacional de Saúde). Descreve-se a sistemática das atividades do Grupo Executivo de Trabalho - GET, designado pelo Conselho Nacional de Saúde (órgão de controle social na área da saúde), para elaborar as Diretrizes. É dado destaque à participação dos diversos segmentos da sociedade, evidenciando multi e transdiciplinaridade, sob a coordenação do GET, do qual o autor foi Presidente. Comentam-se os principais tópicos das Diretrizes brasileiras, enfocando-se a sua relação com o tema de poder e injustiça. Salienta-se o papel dos Comitês de Ética em Pesquisa - CEP e da Comissão Nacional de Ética em Pesquisa - CONEP.