Analise das emissões de CO2 e de energia - simulação com novas tecnologias siderúrgicas

The process of steel production emits a large quantity of greenhouse gases, specifically carbon dioxide (CO2), and the reduction of such emissions is one of the main challenges for the industry in the 21st. Century. To quantify these emissions, the Worldsteel Association (association of the 170 large steel manufacturers of the world) published a methodology (CO2 Emission Data Collection) for calculation and comparison of CO2 emissions among its members. After that, in 2010, this methodology became an ISO (International Organization for Standardization) norm. Today, the calculation of the CO2 emissions in steel making companies follow the ISO 14404-1 for units with blast furnaces and the ISO 14404-2 for units with electric furnaces. In the last years, new technologies were and continue to be developed for the steel making sector aiming at energetic improvements and greenhouse gas reductions (mainly CO2) by the several processes involved in the production of steel. This work had the objective of producing a tool to calculate the CO2 emissions for the steel making sector. An Excel spreadsheet was developed to calculate the emission intensities of CO2 of a steel plant, the Usina Presidente Vargas, of the Companhia Siderúrgica Nacional (CSN). The spreadsheet furnishes results of CO2 emissions and energetic fluxes, and simulates the benefits that some of the new technologies can give to the company. The spreadsheet calculates the emissions in two ways: a) based on the carbon fluxes that enter the unit, and b) based on the emissions of each specific process within the unit (coking, sinterization, blast furnace, among others)

Desgaste e rugosidade superficial de um cimento de ionômero de vidro nanoparticulado

To compare the abrasion wear resistance and superficial roughness of different glass ionomer cements used as restorative materials, focusing on a new nanoparticulate material. Material and Method: Three glass ionomer cements were evaluated: Ketac Molar, Ketac N100 and Vitremer (3M ESPE, St. Paul, MN, USA), as well as the Filtek Z350 (3M ESPE, St. Paul, MN, USA). For each material were fabricated circular specimens (n=12), respecting the handling mode specified by the manufacturer, which were polished with sandpaper disks of decreasing grit. The wear was determined by the amount of mass (M) lost after brushing (10,000 cycles) and the roughness (Ra) using a surface roughness tester. The difference between the Minitial and Mfinal (ΔM) as well as beroughness of aesthetic restorative materials: an in vitro comparison. SADJ. 2001; 56(7): 316-20. 11. Yip HK, Peng D, Smales RJ. Effects of APF gel on the physical structure of compomers and glass ionomer cements. Oper. Dent. 2001; 26(3): 231-8. 12. Ma T, Johnson GH, Gordon GE. Effects of chemical disinfectants on the surface characteristics and color of denture resins. J Prosthet Dent 1997; 77(2): 197-204. 13. International organization for standardization. Technical specification 14569-1. Dental Materials – guidance on testing of wear resistance – PART I: wear by tooth brushing. Switzerland: ISO; 1999. 14. Bollen CML, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater.1997; 13(4): 258-9. 15. Kielbassa AM, Gillmann C, Zantner H, Meyer-Lueckel H, Hellwig E, Schulte-Mönting J. Profilometric and microradiographic studies on the effects of toothpaste and acidic gel abrasivity on sound and demineralized bovine dental enamel. Caries Res. 2005; 39(5): 380-6. 16. Tanoue N, Matsumara H, Atsuta M. Wear and surface roughness of current prosthetic composites after toothbrush/dentifrice abrasion. J Prosthet Dent. 2000; 84(1): 93-7. 17. Heath JR, Wilson HJ. Abrasion of restorative materials by toothpaste. J Oral Rehabil. 1976; 3(2): 121-38. 18. Frazier KB, Rueggeberg FA, Mettenburg DJ. Comparasion of wearresistance of class V restorative materials. J Esthet Dent. 1998; 10(6): 309-14. 19. Momoi Y, Hirosakil K, Kohmol A, McCabe JF. In vitro toothebrushdentifrrice abrasion of resin-modified glass ionomers. Dent Mater. 1997; 13(2): 82-8. 20. Turssi CP, Magalhães CS, Serra MC, Rodrigues Jr.AL. Surface roughness assessment of resin-based materials during brushing preceded by pHcycling simulations. Oper Dent. 2001; 26(6): 576-84. 21. Wang L, Cefaly DF, Dos Santos JL, Dos Santos JR, Lauris JR, Mondelli RF, et al. In vitro interactions between lactic acid solution and art glassionomer cements. J Appl Oral Sci. 2009; 17(4): 274-9. 22. Carvalho FG, Fucio SB, Paula AB, Correr GM, Sinhoreti MA, PuppinRontani RM. Child toothbrush abrasion effect on ionomeric materials. J Dent Child (Chic). 2008; 75(2): 112-6. 23. Coutinho E, Cardoso MV, De Munck J, Neves AA, Van Landuyt KL, Poitevin A, et al. Bonding effectiveness and interfacial characterization of a nano-filled resin-modified glass-ionomer. Dent Mater. 2009; 25(11): 1347-57. tween Rainitial and Rafinal (ΔRa) were also used for statistical analysis (α=0.05). Results: Except for the composite, significant loss of mass was observed for all glass ionomer cements and the ΔM was comparable for all of them. Significant increase in roughness was observed only for Vitremer and Ketac N100. At the end of the brushing cycle, just Vitremer presented surface roughness greater than the composite resin. Conclusion: All glass ionomer cements showed significant weight loss after 10,000 cycles of brushing. However, only Vitremer showed an increase of roughness greater than the Z350 resin, while the nanoparticulate cement Ketac N100 showed a smooth surface comparable to the composite.

Citocompatibilidade, propriedades antibiofilme e físicas e cimentos endodônticos associados à amoxilina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The Pediatric Rheumatology International Trials Organization American-College-of-Rheumatology provisional criteria for the evaluation of response to therapy in juvenile systemic lupus erythematosus: Prospective validation of the definition of improvement

Objective. To use the Pediatric Rheumatology International Trials Organization (PRINTO) core set of outcome measures to develop a validated definition of improvement for the evaluation of response to therapy in juvenile systemic lupus erythematosus (SLE).Methods. Thirty-seven experienced pediatric rheumatologists from 27 countries, each of whom had specific experience in the assessment of juvenile SLE patients, achieved consensus on 128 patient profiles as being clinically improved or not improved. Using the physicians' consensus ratings as the gold standard measure, the chi-square, sensitivity, specificity, false-positive and false-negative rates, area under the receiver operating characteristic curve, and kappa level of agreement for 597 candidate definitions of improvement were calculated. Only definitions with a kappa value greater than 0.7 were retained. The top definitions were selected based on the product of the content validity score multiplied by its kappa statistic.Results. The definition of improvement with the highest final score was at least 50% improvement from baseline in any 2 of the 5 core set measures, with no more than 1 of the remaining worsening by more than 30%.Conclusion. PRINTO proposes a valid and reproducible definition of improvement that reflects well the consensus rating of experienced clinicians and that incorporates clinically meaningful change in core set measures in a composite end point for the evaluation of global response to therapy in patients with juvenile SLE. The definition is now proposed for use in juvenile SLE clinical trials and may help physicians to decide whether a child with SLE responded adequately to therapy.

Proxy-reported health-related quality of life of patients with juvenile idiopathic arthritis: Pediatric rheumatology international trials organization multinational quality of life cohort study

Objective. To investigate the proxy-reported health-related quality of life (HRQOL) and its determinants in patients with juvenile idiopathic arthritis (JIA).Methods. In this multinational, multicenter, cross-sectional study, HRQOL of patients with JIA was assessed through the Child Health Questionnaire (CHQ) and was compared with that of healthy children of similar age from the same geographic area. of joint inflammation, Childhood Health Assessment Questionnaire (CHAQ), and erythrocyte sedimentation rate.Results. A total of 6,639 participants (3,324 with JIA and 3,315 healthy) were enrolled from 32 countries. The mean SD physical and psychosocial summary scores of the CHQ were significantly lower in patients with JIA than in healthy children (physical: 44.5 +/- 10.6 versus 54.6 +/- 4.0, P < 0.0001; psychosocial: 47.6 +/- 8.7 versus 51.9 +/- 7.59 P < 0.0001), with the physical well-being domain being most impaired. Patients with persistent oligoarthritis had better HRQOL compared with other subtypes, whereas HRQOL was similar across patients with systemic arthritis, polyarthritis, and extended oligoarthritis. A CHAQ score > 1 and a pain intensity rating > 3.4 cm on a 10-cm visual analog scale were the strongest determinants of poorer HRQOL in the physical and psychosocial domains, respectively.Conclusion. We found that patients with JIA have a significant impairment of their HRQOL compared with healthy peers, particularly in the physical domain. Physical well-being was mostly affected by the level of functional impairment, whereas the intensity of pain had the greatest influence on psychosocial health.

Análise da presença e articulação teórica da Catalogação de Assunto na literatura científica da International Society for Knowledge Organization ISKO: uma análise de domínio

Subject Cataloging is one of the processes of subject approach to information, beside indexing and subject analysis. In this sense, this research is a part of a broader project which analyses ISKO as an academic space that promotes a dialogical dimension among those theoretical questions. In this sense, it aims to analyze the presence of subject cataloguing in the discussions of knowledge organization as well as how the authors of such subject dialogue each other. Considering the questions, the full collection of ISKO and ISKO-Spain conference proceedings were analyzed in order to verify how present were subject cataloguing matters in those collections. It was possible to identify a group of 36 articles (27 from International ISKO and 9 from ISKO – Spain) whose references were bibliometrically analyzed in terms of documentary forms, average life, language and citation analysis. The results showed that the major ISKO and ISKO-Spain literature on subject cataloguing is based on journal articles, mostly published in English, presenting a relatively young average life (14 years for ISKO and 10 for ISKO-Spain).

Cytogenetic characterization reveals differences in nuclear organization of cystic cells among Brazilian species of Triatoma (Heteroptera, Reduviidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Theoretical Referents in Knowledge Organization: A Domain Analysis of the Knowledge Organization Journal

Aiming at contributing to the epistemological characterization of the area of knowledge organization, our goal is to analyze the KO journal, since its creation in 1993, as a knowledge domain, from a nuclear community of the most productive and greater impact authors, analyzing the dialogue among citing authors and cited ones, and also the co-citations established by the citing authors. We worked with a corpus of 310 articles published between 1993 and 2011 produced by a total of 360 authors. The relatively more productive authors, a group geographically concentrated in Europe (37%), North America (44%) and Asia (19%), is clearly explained by the historical European origin of the ISKO and by an increasing North American presence along the years. Of the 33 most cited authors, 22 were co-cited in at least 6 works, which suggests that they are the theoretical referential nucleus of the area, in the studied journal. Finally, we observe that the area reveals theme cohesion and coherence in its production, enabling us to clearly visualize its theoretical referential nucleus and to confirm the role performed by the KO magazine as a catalyzing agent of international theoretical construction in the area.

Constant Pioneers: The Citation Frontiers of Indexing Theory in the ISKO International Proceedings

Presents a citation analysis of indexing research in the two Proceedings. Understanding that there are different traditions of research into indexing, we look for evidence of this in the citing and cited authors. Three areas of cited and citing authors surface, after applying Price's elitism analysis, each roughly corresponding to geographic distributions.

The Relationship between Authors and Main Thematic Categories in the Field of Knowledge Organization: A Bibliometric Approach

This is a study about the relationships between authors and the main thematic categories in the papers published in the last five International ISKO Conferences, held between 2002 and 2010. The aim is to map the domain as ISKO conferences are considered the most representative forum in the field. The published papers are considered to indicate the relationships between authors and themes. The Classification Scheme for Knowledge Organization Error! Bookmark not defined Literature (CSKOL) was used to categorize the papers. The theoretical and methodological foundations of the study can be found in the concept of domain analysis proposed by Hjorland. The analysis of the papers (n=146) led to the identification of the most productive authors, the networks representing the relationships between the authors as also the categories that constitute the primary areas of research.

Organization model for mobile wireless sensor networks inspired in artificial bee colony

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)