APLICAÇÃO DO MÉTODO DE POLARIZAÇÃO INDUZIDA EM ATERRO CONTROLADO

A geofísica aplicada em estudos ambientais é uma alternativa viável e promissora diante da demanda crescente por novas técnicas de investigação, essencialmente na caracterização e monitoramento de áreas contaminadas. Este trabalho apresenta os resultados de aplicação do método Polarização Induzida (IP), por meio da técnica de caminhamento elétrico, para determinação da área de percolação de material lixiviado proveniente de aterro de resíduos sólidos domiciliares do tipo vala. Os resultados sugerem uma associação entre anomalias de alta cargabilidade e prováveis acumulações de minerais férricos na base das valas de resíduos recentemente fechadas, em contraste com valas mais antigas, onde a cargabilidade tende aos valores naturais para a área. Palavras-chave: Polarização Induzida, resíduos sólidos, cargabilidade, mineralização, geoquímica.

MÉTODOS DA ELETRORESISTIVIDADE E DA POLARIZAÇÃO INDUZIDA APLICADOS NO ESTUDO DO ATERRO

Investigações geofísicas, pelos métodos geoelétricos de eletrorresistividade e polarização induzida (IP), através das técnicas de sondagem elétrica vertical e caminhamento elétrico (configurações Schlumberger e dipolo-dipolo), foram executadas na área do aterro controlado da cidade de Piracicaba (SP), com o objetivo de avaliar as potencialidades da integração dos métodos na caracterização geoelétrica da área. A área sobre a qual está assentado o aterro de Piracicaba é constituída por sedimentos da Formação Corumbataí (sedimentos argilosos e/ou silto-argilosos, com intercalações de arenitos). A interpretação conjunta da resistividade e da polarizabilidade permitiu mapear zonas de percolação de chorume e identificar os diferentes litotipos das formação, identificando materiais arenosos e siltosos. Ficou evidente que a polarizabilidade é sensível à presença de resíduos urbanos e que o efeito de IP é relacionado a materiais polarizáveis dispostos na cava, como latas, papéis, restos eletrônicos e materiais de empréstimo utilizados para a cobertura dos resíduos. Além disso, o método de IP pode ser mais indicado para o mapeamento de zonas de resíduos onde não exista contraste de resistividade entre o meio natural e os resíduos. Palavras-chave: Eletrorresisitividade, polarização induzida, aterro sanitário.

Métodos geoelétricos aplicados no estudo de uma ocorrência de manganês no município de Careaçu - MG

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Métodos geoelétricos empregados na caracterização e monitoramento de anomalias inerentes à infiltração controlada de vinhaça

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo geofísico em um depósito de manganês supergênico no município de Itapira - SP

The mining research is a complex activity, which should preferably involve the combination of direct and indirect techniques of geological research. The increasing demand for base metals in domestic and international markets provide the revaluation of mineral occurrences, which can be converted into deposits and mines. This paper presents the results of the application of geophysical methods of electric resistivity and induced polarization in main foliation parallel to the arrangement of the area, in a deposit of oxides and hydroxides in massive and disseminated ores, docked in gneisses and quartzites, located in the municipality of Itapira, in the North of the State of São Paulo in Brazil. Inversion models indicate the predominance of high cargabilidade that partially coincide with low resistivity values. Integration of geophysical data made possible the drafting of sections of electric walking with cross-checking distance x depth, for detailing your target. The integrated analysis of geophysical and geological structural data leads to the conclusion that the primary mining suffers structural control with the regional foliation in ores

Monitoramento da atenuação natural de álcool etílico hidratado combustível em escala laboratorial por meio de métodos geofísicos

Currently has few studies today concerning the behavior of the ethyl alcohol hydrated combustible in the geological environment, results of eventual spill or leaks in a wide transport chain and distribution. This work discusses the results of an experiment in laboratorial scale, that involves the monitoring of alterations in physical properties a simulate leak of alcohol in a tank with sand saturated in water, during 4920 hours. Are applied electrical resistivity, induced polarization and spontaneous potential geophysical methods. The electric resistivity is clearly correlating to the ethanol degradation pattern. The chargeability demonstrated sensibility to this pattern, while the natural electric potential revealed direct association with the oscillations of groundwater level. The variability of the physical parameters monitoring probable control for ethanol degradation process in environment study.

Análise das relações entre parâmetros geolétricos e vazões para o aquífero livre de Caçapava do Sul - RS

The geophysical methods may be employed in aquifer system studies, as determination of groundwater level, soil/rock contact, beyond estimative of the aquifer thickness horizon. The geoeletric methods are particularly relevant in evaluations of the oilfields systems, due to directs relations between porosity and electrical resistivity, which allow inferences about oil and gas production. The indirect estimative of the productions in free aquifers system is something complex before of the diverse variables responsible for factors or physical phenomena, as clays minerals, which conditioned the physical parameters by electric geophysical methods. This paper present analyzed correlation among electrical resistivity, chargeability and direct measure flow in shallow wells, for determination of statistical relationships between parameters and evaluation of the geological constraints evolved. The study count with the 23 shallow wells located in free aquifer, constituted by alteration materials of the granites localized in Caçapava do Sul (RS). The geophysical data are acquired by vertical electric sounding in Schlumberger array. The correlations between electrical resistivity and flow, chargeability and flow, thickness of the soil/saprolite and flow indicated relationships between physical and hydrogeologic parameters, with variations conditioned by factors as porosity, permeability, besides intrinsic geological heterogeneities such soil variable thickness and rock fragments with several alteration degrees.

Caracterização geofísica no Gabro Santa Catarina, São Sepé (RS)

Geophysical methods are widely used in mineral exploration for several types of mineral deposits. When combined with direct studies as geochemistry, a substantial increase in the probability of ore discovery is possible in mineral exploration activities. Electrical geophysical methods are particularly promising in studies related to the search of sulphides due to the contrast of physical properties electric resistivity and chargeability. This paper presents the results obtained from the application of Resistivity (DC) and Induced Polarization methods, through the electrical profiling technique, aiming at evaluating the potential mineral of a gabbro intruded in a metasedimentary sequence, in an area where several occurrences of gold and copper were described. This gabbro is ranked on the Basic-Ultrabasic stratiform bodies, which gather peridotites, gabbros, and layered anortosites. Three radial lines of electrical profiling were performed, spaced of 60° and crossing at the area center, with readings of electric resistivity and chargeability in Wenner-Schlumberger array. The association of low resistivity and high chargeability areas has allowed defining potentially mineralized zones related to structures that condition the drainage net in the gabbro domain. Grains of gold detected through geochemical prospection of alluvial sediments dowstream from the gabbro may have originated from leaching of ores deposited in fractures through the action of river waters within the gabbro domain, possibly consisting of sulphides and gold.

Avaliação de contaminação com óleo diesel por meio dos métodos de Eletrorresistividade e Polarização Induzida em Santa Ernestina-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Integração de dados geofísicos e geológicos na caracterização morfológica de ocorrência de cobre na borda norte da Bacia do Camaquã (RS)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Pressure-induced electrical and structural anomalies in Pb1-xCaxTiO3 thin films grown at various oxygen pressures by chemical solution route

Lead calcium titanate (Pb1-xCaxTiO3 or PCT) thin films have been thermally treated under different oxygen pressures, 10, 40 and 80 bar, by using the so-called chemical solution deposition method. The structural, morphological, dielectric and ferroelectric properties were characterized by x-ray diffraction, FT-infrared and Raman spectroscopy, atomic force microscopy and polarization-electric-field hysteresis loop measurements. By annealing at a controlled pressure of around 10 and 40 bar, well-crystallized PCT thin films were successfully prepared. For the sample submitted to 80 bar, the x-ray diffraction, Fourier transformed-infrared and Raman data indicated deviation from the tetragonal symmetry. The most interesting feature in the Raman spectra is the occurrence of intense vibrational modes at frequencies of around 747 and 820 cm(-1), whose presence depends strongly on the amount of the pyrochlore phase. In addition, the Raman spectrum indicates the presence of symmetry-breaking disorder, which would be expected for an amorphous (disorder) and mixed pyrochlore-perovskite phase. During the high-pressure annealing process, the crystallinity and the grain size of the annealed film decreased. This process effectively suppressed both the dielectric and ferroelectric behaviour. Ferroelectric hysteresis loop measurements performed on these PCT films exhibited a clear decrease in the remanent polarization with increasing oxygen pressure.

Muon transverse polarization in the K-l2 gamma decay in the standard model

The muon transverse polarization in the K+-->mu(+)nugamma process induced by the electromagnetic final state interaction is calculated in the framework of the standard model. It is shown that one loop contributions lead to a nonvanishing muon transverse polarization. The value of the muon transverse polarization averaged over the kinematical region of E(gamma)greater than or equal to20 MeV is equal to 5.63x10(-4).

Cytochemistry and polarization microscopy of amphibian sperm cell nuclei presumed to differ in basic protein composition

The pattern of availability of free DNA phosphates, and the kind of DNA-protein complex arrangement, both induced by nuclear basic proteins, and the richness in arginine residues in these proteins were investigated cytochemically and cytophysically in spermatozoa of the South-American Hylidae species, Hyla fuscovaria and Hyla biobeba. The aim was to demonstrate differences at the level of sperm histones in two species of Hyla until recently considered to be congeneric. The results indicated differences in the spermatozoal nuclear basic proteins and DNA-protein complexes when the two species were compared. The spermatozoa of Hyla biobeba were assumed to be likely to contain a Bloch's ''type 3'' protein type (intermediate sperm basic protein), similarly to Hyla species of North and Central America. on the other hand, the data obtained for the spermatozoa of Hyla fuscovaria indicated that they contain a protamine or protamine-like protein, differing from Hyla biobeba and Hyla species of North and Central America. It is suggested that the differences reported here may be genus-specific, since Hyla fuscovaria has recently been reclassified as Scinax fuscovaria based on parameters other than sperm histone types. These findings are in agreement with the general view of a wide variability in sperm nuclear proteins in the Anura group.

Mechanical and electrical driving field induced high-frequency dielectric anomalies in ferroelectric systems

Polycrystalline or single-crystal ferroelectric materials present dielectric dispersion in the frequency range 100 MHz-1 GHz that has been attributed to a dispersive ( relaxation-like) mechanism as well as a resonant mechanism. Particularly in 'normal' ferroelectric materials, a dielectric response that is indistinguishable from dispersion or a resonance has been reported. Nevertheless, the reported results are not conclusive enough to distinguish each mechanism clearly. A detailed study of the dielectric dispersion phenomenon has been carried out in PbTiO3-based ferroelectric ceramics, with the composition Pb1-xLaxTiO3 (x = 0.15), over a wide range of temperatures and frequencies, including microwave frequencies. The dielectric response of La-modified lead titanate ferroelectric ceramics, in 'virgin' and poled states, has been investigated in the temperature and frequency ranges 300-450 K and 1 kHz-2 GHz, respectively. The results revealed that the frequency dependence of the dielectric anomalies, depending on the measuring direction with respect to the orientation of the macroscopic polarization, may be described as a general mechanism related to an 'over-damped' resonant process. Applying either a uniaxial stress along the measurement field direction or a poling electric field parallel and/or perpendicular to the measuring direction, a resonant response of the real and imaginary components of the dielectric constant is observed, in contrast to the dispersion behavior obtained in the absence of the stress, for the 'virgin' samples. Both results, resonance and/or dispersion, can be explained by considering a common mechanism involving a resonant response (damped and/or over-damped) which is strongly affected by a ferroelastic-ferroelectric coupling, contributing to the low-field dielectric constant.

Kinetics of the polarization reversal process in a non-constant applied electric field and the generalized superposition principle

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)