Reações ácido-base: conceito, representação e generalização a partir das energias envolvidas nas transformações

Undergraduate students on the first year of Chemistry Courses are unfamiliar with the representation of acid-base reactions using the ionic equation H+ + OH- → H2O. A chemistry class was proposed about acid-base reactions using theory and experimental evaluation of neutralization heat to discuss the energy involved when water is formed from H+ and OH- ions. The experiment is suggested using different strong acids and strong base pairs. The presentation of the theme within a chemistry class for high school teachers increased the number of individuals that saw the acid-base reaction from this perspective.

The CMS experiment at the CERN LHC

The Compact Muon Solenoid (CMS) detector is described. The detector operates at the Large Hadron Collider (LHC) at CERN. It was conceived to study proton-proton (and lead-lead) collisions at a centre-of-mass energy of 14 TeV (5.5 TeV nucleon-nucleon) and at luminosities up to 10(34)cm(-2)s(-1) (10(27)cm(-2)s(-1)). At the core of the CMS detector sits a high-magnetic-field and large-bore superconducting solenoid surrounding an all-silicon pixel and strip tracker, a lead-tungstate scintillating-crystals electromagnetic calorimeter, and a brass-scintillator sampling hadron calorimeter. The iron yoke of the flux-return is instrumented with four stations of muon detectors covering most of the 4 pi solid angle. Forward sampling calorimeters extend the pseudo-rapidity coverage to high values (vertical bar eta vertical bar <= 5) assuring very good hermeticity. The overall dimensions of the CMS detector are a length of 21.6 m, a diameter of 14.6 m and a total weight of 12500 t.

Influência do pH sobre a estabilidade de suspensões de alumina estabilizadas eletroestericamente

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sintering of tin oxide processed by slip casting

Sintering of SnO 2 compacts, obtained through slip casting, was studied by means of dilatometry, Hg porosimetry, scanning electron microscopy, and density measurement (Archimedes method). Sintering is strongly influenced by the green microstructure. Moreover, the sintering mechanisms are not dependent on the slurries' solid content up to 50% of solids in volume. Above this value, agglomerates are formed, leading to differential sintering inside and among the agglomerates. Another important point is the reduction of the temperature of maximum shrinkage rate when compared to tin oxide processed by isostatic pressing. This reduction is more accentuated when ammonium hydroxide is added to the suspension. (C) 2000 Published by Elsevier Science Ltd. All rights reserved.

Rheological properties of tin oxide suspensions

The rheological properties of tin oxide slurries were studied experimentally and theoretically. The deflocculants used were ammonium polyacrilate (PAA) and the copolymer poly(vinyl butyral-co-vinyl alcohol-co-vinyl acetate) (PVB-PVA-PVAc), in water and ethanol, respectively. The amount of deflocculant was optimized for different solid contents by means of viscosity measurements. In spite of the high stability of PVB-dispersed slurries, a high solid concentration was not obtained. On the other hand, a slurry with a 56.4 vol.% of solids was attained when PAA was used. A theoretical study of the adsorption of PAA in its dissociated (basic solution) and non-dissociated (acidic solution) forms on SnO 2 (110) is presented. This analysis was made by means of the PM3 method using a large cluster Sn 15O 28 for the surface model. The calculated adsorption energy is larger for the ionized PAA than for the non-ionized form, indicating that alkaline slurries favor PAA adsorption on the SnO 2 surface. © 2002 Elsevier Science Ltd. All rights reserved.

Ceramic Crucible Corrosion by Heavy Metal Oxide Glasses, Part I: Phenomenological Study

Heavy metal oxide (HMO) glasses have received special attention due to their optical, electrical and magnetic properties. The problem with these glasses is their corrosive nature. In this work, three ceramic crucibles (Al 2O 3, SnO 2 and ZrO 2) were tested in the melting of the system 40 PbO-35 BiO 1.5-25 GaO 1.5 (cation-%). After glass melting, crucibles were transversally cut and analyzed by scanning electronic microscopy (SEM), coupled to microanalysis by energy dispersive spectroscopy (EDS). Results indicated that zirconia crucibles presented the highest corrosion, probably due to its smallest grain size. Tin oxide crucibles presented a low corrosion with small penetration of the glass into the crucible. This way, these crucibles are an interesting alternative to melt corrosive glasses in instead of gold or platinum crucibles. It is important to emphasize the lower cost of tin oxide crucibles, compared to gold or platinum ones.

Ceramic Crucible Corrosion by Heavy Metal Oxide Glasses, Part II: Diffusion Study

Due to their low cost and high resistance to corrosion, ceramic crucibles can be used for the melting of PBG glasses (PbO-BiO 1.5GaO 1.5). These glasses present good window transmission from ultra-violet to infrared, making their use as optical fibres promising. However, their disadvantage is the high reactivity, leading to the corrosion of different crucibles, including gold and platinum ones. In this work, the corrosion of Al 2O 3, SnO 2 and ZrO 2 crucibles after melting at temperatures varying from 850 to 1000°C, was evaluated by Scanning Electronic Microscopy (SEM) in conjunction with microanalysis by EDS. The lead diffusion profile in the crucible material was obtained. Diffusion coefficients were calculated according to the Fick and Fisher theories. Results indicated that the different crucibles presented similar behaviour: in the region near the interface, diffusion occurs in the volumetric way and in regions away from the interface, diffusion occurs through grain boundary.

Localization of myosin-Va in subpopulations of cells in rat endocrine organs

Myosin-Va is a Ca 2+/calmodulin-regulated unconventional myosin involved in the transport of vesicles, membranous organelles, and macromolecular complexes composed of proteins and mRNA. The cellular localization of myosin-Va has been described in great detail in several vertebrate cell types, including neurons, melanocytes, lymphocytes, auditory tissues, and a number of cultured cells. Here, we provide an immunohistochemical view of the tissue distribution of myosin-Va in the major endocrine organs. Myosin-Va is highly expressed in the pineal and pituitary glands and in specific cell populations of other endocrine glands, especially the parafollicular cells of the thyroid, the principal cells of the parathyroid, the islets of Langerhans of the pancreas, the chromaffin cells of the adrenal medulla, and a subpopulation of interstitial testicular cells. Weak to moderate staining has been detected in steroidogenic cells of the adrenal cortex, ovary, and Leydig cells. Myosin-Va has also been localized to non-endocrine cells, such as the germ cells of the seminiferous epithelium and maturing oocytes and in the intercalated ducts of the exocrine pancreas. These data provide the first systematic description of myosin-Va localization in the major endocrine organs of rat. © 2008 Springer-Verlag.

Trochlear nerve palsy associated with claude bernard-horner syndrome after brainstem stroke

The association of unilateral trochlear nerve palsy with Claude Bernard-Horner syndrome represents a rare clinical condition. We present the case of a patient with this unusual presentation. The investigation performed implicated cerebrovascular disease as the underlying cause of the condition in this patient. © 2011 S. Karger AG, Basel.

Could albumin level explain the higher mortality in hemodialysis patients with pulmonary hypertension?

Background: The pathogenesis of pulmonary hypertension (PH) in hemodialysis is still unclear. The aim of thisstudy was to identify the risk factors associated with the presence of PH in chronic hemodialysis patients and toverify whether these factors might explain the highest mortality among them.Methods: We conducted a retrospective study of hemodialysis patients who started treatment from August 2001to October 2007 and were followed up until April 2011 in a Brazilian referral medical school. According to theresults of echocardiography examination, patients were allocated in two groups: those with PH and those withoutPH. Clinical parameters, site and type of vascular access, bioimpedance, and laboratorial findings were comparedbetween the groups and a logistic regression model was elaborated. Actuarial survival curves were constructed andhazard risk to death was evaluated by Cox regression analysis.Results: PH > 35 mmHg was found in 23 (30.6%) of the 75 patients studied. The groups differed in extracellularwater, ventricular thickness, left atrium diameter, and ventricular filling. In a univariate analysis, extracellular waterwas associated with PH (relative risk = 1.194; 95% CI of 1.006 1.416; p = 0.042); nevertheless, in a multiple model,only left atrium enlargement was independently associated with PH (relative risk =1.172; 95% CI of 1.010 1.359;p = 0.036). PH (hazard risk = 3.008; 95% CI of 1.285 7.043; p = 0.011) and age (hazard risk of 1.034 per year of age;95% CI of 1.000 7.068; p = 0.047) were significantly associated with mortality in a multiple Cox regression analysis.However, when albumin was taken in account the only statistically significant association was between albuminlevel and mortality (hazard risk = 0.342 per g/dL; 95% CI of 0.119 0.984; p = 0.047) while the presence of PH lost itsstatistical significance (p = 0.184). Mortality was higher in patients with PH (47.8% vs 25%) who also had astatistically worse survival after the sixth year of follow up.Conclusions: PH in hemodialysis patients is associated with parameters of volume overload that sheds light on itspathophysiology. Mortality is higher in hemodialysis patients with PH and the low albumin level can explain thisassociation.© 2012 Greenfield et al.; licensee BioMed Central Ltd.

Arterial hypertension perpetuates alveolar bone loss

Few studies have focused on the impact of hypertension on the progression of periodontitis (PD). The purpose of this study was to evaluate whether hypertension affects PD by enhancing bone loss even after the stimulus for PD induction is removed. Ligature-induced PD was created on the first mandibular molars of spontaneously hypertensive rats (SHR) and normotensive rats (Wistar Kyoto-WKY). The animals were assigned to non-ligated controls (C) and PD groups: WKY-C, WKY-PD, SHR-C, and SHR-PD. After 10 days, five animals of each group were killed and the ligatures of the other animals were removed. On the 21st day (11 days without PD induced), the remaining animals were killed. The jaws were defleshed and the amount of bone loss was measured. After 10 days, the PD groups showed more bone loss than its controls (P < .05); SHR-PD = 0.72 ± 0.05 mm, SHR-C = 0.39 ± 0.04 mm, WKY-PD = 0.75 ± 0.04 mm, and WKY-C = 0.56 ± 0.04 mm. The cumulative bone loss on day 21 (0.94 ± 0.13 mm) was significantly worse than on day 10 only in SHR-PD group (P < .05). The final bone loss differences between PD and C groups accounted for 102% (SHR) and 26% (WKY) increase in comparison with the initial control levels. Hypertension is associated with progressive alveolar bone loss even when the stimulus for PD induction is removed and it may be speculated that host condition perpetuates alveolar bone loss. © 2013 Informa Healthcare USA, Inc.

Hydrostatic and [001] uniaxial pressure on anatase TiO2 by periodic B3LYP-D* calculations

The effect of high hydrostatic and [001] uniaxial pressures on TiO 2 anatase was studied under the framework of periodic calculations with the inclusion of DFT-D2 dispersion potential adjusted for this system (B3LYP-D*). The role of dispersion in distorted unit cells was evaluated in terms of lattice parameters, elastic constants, equation of state, vibrational properties, and electronic properties (band structure and density of states). A more reliable description at high pressures was achieved because the B3LYP-D* presented an improvement in all properties for undistorted bulk over conventional B3LYP and B3LYP-D. From density of states analysis, we observed that the contribution of crystalline orbitals to the edge of valence and conduction bands changed within applied pressure. The studied distortions can give some insight into behavior of electronic and structural properties due to local stress in anatase bulk from doping, defects, and physical tensions in nanometric forms. © 2013 American Chemical Society.