38 resultados para Human body size.


Relevância:

90.00% 90.00%

Publicador:

Resumo:

This study aimed to assess the student-furniture interface from anthropometric parameters of the sitting posture. The sample was composed of 887 students from two public schools in the State of Parana - Brazil, which attended children from 7 to 17 years of age. The data collection used anthropometric measures of the sitting position, a questionnaire containing a human body diagram for indication of discomfort areas and photographic records to verify postural and ergonomic inadequacies in classroom. The following anthropometric variables were measured: popliteal height, sacro-popliteal length, hip width, lumbar support height, and elbow and thigh height. Percentiles 5 and 95 of anthropometric variables showed differences statistically significant, with variation coefficient greater than 30%. In relation to body discomfort, the highest occurrences were recorded for ankle, knees and shoulder joints as well as for spine and buttocks. It was concluded that children use school furniture that does not meet their anthropometric standards, which favored the adoption of incorrect postures and contributed to the emergence of musculoskeletal problems that can interfere with their educational process.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

90.00% 90.00%

Publicador:

Resumo:

This study examined how the standard metabolic rate of tegu lizards, a species that undergoes large ontogenetic changes in body weight with associated changes in life-history traits, is affected by changes in body mass, body temperature, season, and life-history traits. We measured rates of oxygen consumption ((V) over dot o(2)) in 90 individuals ranging in body mass from 10.4. g to 3.75 kg at three experimental temperatures ( 17 degrees, 25 degrees, and 30 degrees C) over the four seasons. We found that standard metabolic rate scaled to the power of 0.84 of body mass at all experimental temperatures in all seasons and that thermal sensitivity of metabolism was relatively low (Q(10) approximate to 2.0-2.5) over the range from 17 degrees to 30 degrees C regardless of body size or season. Metabolic rates did vary seasonally, being higher in spring and summer than in autumn and winter at the same temperatures, and this was true regardless of animal size. Finally, in this study, the changes in life-history traits that occurred ontogenetically were not accompanied by significant changes in metabolic rate.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Whereas genome sequencing defines the genetic potential of an organism, transcript sequencing defines the utilization of this potential and links the genome with most areas of biology. To exploit the information within the human genome in the fight against cancer, we have deposited some two million expressed sequence tags (ESTs) from human tumors and their corresponding normal tissues in the public databases. The data currently define approximate to23,500 genes, of which only approximate to1,250 are still represented only by ESTs. Examination of the EST coverage of known cancer-related (CR) genes reveals that <1% do not have corresponding ESTs, indicating that the representation of genes associated with commonly studied tumors is high. The careful recording of the origin of all ESTs we have produced has enabled detailed definition of where the genes they represent are expressed in the human body. More than 100,000 ESTs are available for seven tissues, indicating a surprising variability of gene usage that has led to the discovery of a significant number of genes with restricted expression, and that may thus be therapeutically useful. The ESTs also reveal novel nonsynonymous germline variants (although the one-pass nature of the data necessitates careful validation) and many alternatively spliced transcripts. Although widely exploited by the scientific community, vindicating our totally open source policy, the EST data generated still provide extensive information that remains to be systematically explored, and that may further facilitate progress toward both the understanding and treatment of human cancers.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

The ovarian complement of anurans exhibiting different reproductive modes is highly diverse, and intraspecific variation in reproductive output of anurans is generally related to variation in female properties and/or environmental conditions. The size-fecundity relationships, reproductive investment, and correlation between ovary mass and fat body mass were investigated for females of an anuran assemblage in the Pantanal, Brazil. Female body size was positively correlated with clutch size among seven of the eight species analyzed. However, these results seem to be influenced by seasonal variation in fecundity. Interspecific size-fecundity relationships revealed that female SVL was positively correlated with clutch size and egg size regardless of reproductive mode. Among 11 species analyzed, the reproductive investment (RI: ovary mass relative to body mass) varied from 5.5 to 18%, and there were no differences among reproductive modes and activity patterns (explosive/prolonged). RI correlated negatively with female size. Among three Leptodactylus species examined, negative correlation between ovary mass and fat body mass was verified for two species. Variations in the reproductive strategies are closely related to the reproductive activity patterns and reproductive modes exhibited by individual species, but are also influenced by environmental conditions. However, regardless of reproductive mode or activity pattern, each species seems to exhibit a reproductive strategy that allows them to respond differently to the same environmental restrictions.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Physalaemus crombiei is a small foam-nesting frog endemic to the Atlantic forest. It is a member of the P. signifer group known only from its type locality in Santa Teresa, State of Espírito Santo, and from another locality in the State of Bahia, Brazil. Most Physalaemus species are aquatic breeders, and species in the P. signifer group are the only ones exhibiting a tendency toward terrestrial reproduction in the genus. Here we describe the reproductive period, breeding site and reproductive modes of P. crombiei from a third population in the Atlantic forest, southeastern Brazil. We also investigated reproductive effort and size-fecundity relationships in females. Reproductive traits were compared to other species in the genus Physalaemus, especially those included in the P. signifer group. Physalaemus crombiei is a prolonged breeder, reproducing throughout the year with a peak of activity during the most rainy months (October-March). Males called from the humid forest foor and eggs embedded in foam nests were deposited in the water as well as on the humid foor amidst the leaf litter, or inside fallen leaves or tree holes containing rainwater on the forest foor. As expected, P. crombiei exhibited three alternative reproductive modes, as described for other species of the P. signifer group. The number of eggs produced per female varied from 91 to 250. Female body size is positively correlated both with ovary mass and clutch size (number of eggs per clutch). Variation in the number and size of eggs observed in Physalaemus species may be explained not only by female size, but also by the terrestrial reproductive mode exhibited by the species in the P. signifer group.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Aim: Nowadays, research on orthopedic and dental implants is focused on titanium alloys for their mechanical properties and corrosion resistance in the human body environment. Another important aspect to be investigated is their surface topography, which is very important to osseointegration. With laser beam irradiation for roughening the implants surface an easier control of the microtopography is achieved, and surface contamination is avoided. The aim of this study was to assess human bone marrow stem cells response to a newly developed titanium alloy, Ti-15Mo, with surface topography modified by laser beam irradiation. Materials and methods: A total of 10 Ti machined disks (control), 10 Ti-15Mo machined disks and 10 Ti-15Mo disks treated by laser beam-irradiation were prepared. To study how Ti-15Mo surface topografy can induce osteoblast differentiation in mesenchymal stem cells, the expression levels of bone related genes and mesenchymal stem cells marker were analyzed, using real time Reverse Transcription-Polymerase Chain Reaction. Results: In Test 1 (comparison between Ti-15Mo machined disks and Ti-machined disks) quantitative real-time RT-PCR showed a significant induction of ALPL, FOSL1 and SPP1, which increase 20% or more. In Test 2 (comparison between Ti-15Mo laser treated disks and Ti-machined disks) all investigated genes were up-regulated. By comparing Test 1 and Test 2 it was detected that COL1A1, COL3A1, FOSL1 and ENG sensibly increased their expression whereas RUNX2, ALPL and SPP1 expression remained substantially unchanged. Conclusion: The present study demonstrated that laser treated Ti-15Mo alloys are promising materials for implants application.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Background: Spondyloepiphyseal dysplasia-brachydactyly and distinctive speech (SED-BDS) is a syndrome characterized by short stature, disproportionately short limbs, peculiar face, thick and abundant hair, high-pitched and coarse voice, small epiphyses, brachymetacarpalia, brachymetatarsalia and brachy-phalangia of fingers and toes, small pelvis and delayed carpal bone age, among other features. Case Report: We report a Brazilian patient with father, brother and sister presenting with the same typical features of the syndrome. Clinically, he showed disproportionately short stature, rhizo-meso-acromelic shortness of the extremities, short hands and feet, a peculiar distinctive high-pitched voice, peculiar facies, and other features already reported as characteristic of this syndrome. Radiographic fndings included shape anomalies of the vertebral bodies such as cuboid-shaped vertebral bodies, mild scoliosis, short and broad tubular bones, brachymetacarpalia, brachymetatarsalia, and brachy-dactyly, lumbar hyperlordosis, generalized osteopenia, and hypoplastic iliac wings. Conclusions: Few cases have been described, as this is a rare skeletal dysplasia. This paper describes a new familial case of SED-BDS. © The American Journal of Case Reports.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Malicious programs (malware) can cause severe damage on computer systems and data. The mechanism that the human immune system uses to detect and protect from organisms that threaten the human body is efficient and can be adapted to detect malware attacks. In this paper we propose a system to perform malware distributed collection, analysis and detection, this last inspired by the human immune system. After collecting malware samples from Internet, they are dynamically analyzed so as to provide execution traces at the operating system level and network flows that are used to create a behavioral model and to generate a detection signature. Those signatures serve as input to a malware detector, acting as the antibodies in the antigen detection process. This allows us to understand the malware attack and aids in the infection removal procedures. © 2012 Springer-Verlag.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

The Finite Element Method is a well-known technique, being extensively applied in different areas. Studies using the Finite Element Method (FEM) are targeted to improve cardiac ablation procedures. For such simulations, the finite element meshes should consider the size and histological features of the target structures. However, it is possible to verify that some methods or tools used to generate meshes of human body structures are still limited, due to nondetailed models, nontrivial preprocessing, or mainly limitation in the use condition. In this paper, alternatives are demonstrated to solid modeling and automatic generation of highly refined tetrahedral meshes, with quality compatible with other studies focused on mesh generation. The innovations presented here are strategies to integrate Open Source Software (OSS). The chosen techniques and strategies are presented and discussed, considering cardiac structures as a first application context. © 2013 E. Pavarino et al.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Pós-graduação em Medicina Veterinária - FMVZ

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Pós-graduação em Medicina Veterinária - FCAV

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)