Controle químico de Typha subulata em dois estádios de desenvolvimento

O objetivo deste trabalho foi avaliar o controle químico de plantas de taboa em dois estádios fenológicos de desenvolvimento, ou seja, no estádio de pleno desenvolvimento vegetativo de 0,50 a 0,70 m e no estádio de florescimento. Os herbicidas e as doses utilizadas foram: imazapyr a 250, 500 e 750 g ha-1 com 0,5% de Aterbane; imazapyr a 250, 500 e 750 g ha-1 com 0,01% de Silwet; glyphosate a 3.360 e 4.320 g ha-1 com 0,5% de Aterbane; glyphosate a 3.360 e 4.320 g ha-1 com 0,01% de Silwet, além de uma testemunha sem aplicação de herbicidas. Os tratamentos foram instalados em delineamento experimental inteiramente casualizado, com quatro repetições. Os herbicidas foram aplicados com um pulverizador costal, munido de barra com duas pontas de jato plano XR Teejet 8002 S, a pressão constante de CO2 a 220 KPa, com consumo de calda de 200 L ha-1. As plantas de taboa foram mais sensíveis aos herbicidas quando no estádio de pleno desenvolvimento vegetativo de crescimento que no estádio de pleno florescimento, observando controle aceitável tanto com imazapyr como com glyphosate, exceto a dose de 250 g ha-1 de imazapyr com 0,5% de Aterbane. Neste mesmo estádio foi observado que o surfatante Aterbane foi menos efetivo que o Silwet, quando adicionado à menor dose do herbicida imazapyr.

Desempenho de pontas de pulverização na deposição de gotas de pulverização na cultura do amendoim

The objective of this study was to evaluate the effect of nozzles on spray droplet deposition in the peanut crop cultivar 'Runner IAC 886'. The study was conducted in the field, and the applications of treatments performed in the vegetative stage (V1) and reproductive (R2). It was used the Brilliant Blue FDC - 1 as tracer in water solution, at 500 ppm. The treatments consisted of seven spray nozzle XR 110015 VS (150 L ha(-1)), XR 11002 VS (200 L ha(-1)), TX-VK 6 (150L ha(-1)), TX-VK 8 (200 L ha-1), AI 110015 VS (150 L ha(-1)), AI11002 VS (200 L ha(-1)) e TJ60 11002 VS (150 e 200 L ha(-1)). It was used a randomized blocks design, with four replications. After application, plants were immediately collected, and washed in 100 mL of distilled water for posterior tracer quantification in spectrophotometer. The data had been adjusted a regression curve for Gompertz model. The results had evidenced that at low volumes of application the nozzle AI 110015 VS and TJ60 11002 VS, were the ones with best distribution uniformity of spray on plants of peanut cultivar 'Runner IAC 886' in the vegetative stage (V1) and reproductive (R2) respectively, and the largest deposits and higher percentage of failures in applications have been found in younger plants by comparing the growth stages of application, regardless of the spray nozzle and volume.

Acúmulo de nutrientes em gérbera de vaso em função de fontes e doses de potássio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Parcelamento e largura da faixa de aplicação da uréia na recuperação do nitrogênio pela planta de milho

Com o objetivo de estudar o parcelamento e a largura da faixa de aplicação como meios para aumentar a recuperação pelo milho do nitrogênio da uréia aplicada em superfície, foi conduzido no ano agrícola 93/94, em um Latossolo Vermelho Escuro, em condições de campo, um experimento delineado em blocos ao acaso, com cinco repetições. Sete tratamentos foram utilizados: testemunha (sem N em cobertura); aplicação de N parcelada (50 kg ha-1 de N aos 38 dias após semeadura - d.a.s e 50 kg ha-1 de N aos 60 d.a.s.) para faixas de 10, 20 e 40 cm; aplicação de N (100 kg ha-1 de N aos 38 d.a.s.) para faixas de 10 e 40 cm e, aplicação de N parcelada (50 kg de N/ha aos 38 d.a.s. e 50 kg ha-1 de N aos 60 d.a.s.) para faixa de 20 cm de largura, neste caso, uréia granulada. A aplicação de uréia parcelada em cobertura, em faixas de 10, 20 e 40 cm de largura, não afetaram a massa de matéria seca, o conteúdo, a quantidade e a recuperação do N pela planta de milho. A recuperação de N pela planta de milho foi maior para a aplicação de 220 kg ha-1 de uréia em uma única aplicação em faixas de 10cm de largura em relação a de 40 cm. O parcelamento da uréia aumentou os valores de massa seca, conteúdo, quantidade e recuperação do N na planta de milho em relação a aplicação em uma única vez.

Aumento da produtividade de soja com a aplicação de bioestimulantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Épocas de la aplicación de desecantes en el cultivo de la soja: tenor de agua y productividad

Los herbicidas glifosato y paraquat son utilizados por los productores de soja con el objetivo de desecar las plantas, anticipar y uniformizar la cosecha. Sin embargo, el uso indiscriminado de herbicidas puede causar problemas eventualmente en las características agronómicas y fisiológicas del cultivo. El presente trabajo tuvo por objetivo evaluar la utilización de los herbicidas glifosato y paraquat como desecantes para el cultivo de la soja. El experimento fue llevado a cabo en el año agrícola 2005/06, en un delineamiento experimental de bloques al azar, con cuatro repeticiones. Los tratamientos fueron dispuestos en dos esquemas factoriales, 3x3x5x2 y 3x2x5x2: dos desecantes (glifosato y paraquat) y un testigo (sin desecación), aplicación de los desecantes en tres y dos estadios fenológicos de las plantas (R6, R7 y R8) y (R7 y R8), para las variedades MSOY 6101 de ciclo superprecoz, y MG/BR 46 (Conquista) de ciclo precoz, respectivamente, cinco épocas de muestreo (2; 4; 6; 8 y 10 días después de la aplicación) y evaluación en dos posiciones en la planta (ápice y base). Fue evaluada la producción de semillas, masa y tenor de agua de 100 semillas. Los desecantes evaluados fueron eficientes en la reducción del tenor de agua de las semillas, sin afectar la productividad y la masa de 100 semillas.

Anatomia de ápices radiculares de feijão cv. carioca submetidos a níveis de boro em solução nutritiva

Foram estudadas as alterações anatômicas em ápices radiculares do feijoeiro (Phaseolus vulgaris L. cv. Carioca), quando submetidos a diferentes níveis de boro em solução nutritiva. Através de um experimento inteiramente casualizado, foram realizados três tratamentos como se segue: T1 0,50 mg L-1 de boro (testemunha); T2 0,25 mg L-1 de boro (nível intermediário); T0 omisso em boro; sendo feitas amostragens em três estágios sucessivos de desenvolvimento da planta, no decorrer de seu ciclo. As alterações foram avaliadas efetuando-se secções longitudinais de ápices radiculares, sendo analisados comparativamente por meio de estudo cito-histológico com o emprego de microscópio de luz. Considerando como testemunha as plantas submetidas ao nível de 0,50 mg L-1 de boro na solução nutritiva, pôde-se verificar que a omissão desse micronutriente, na solução nutritiva, provocou inibição da divisão e alongamento celular, hipertrofia de células, desorganização de elementos vasculares em raiz, impedindo que a planta completasse seu ciclo, morrendo ao redor do 55o. dia após o transplante. O nível de 0,25 mg L-1 de boro, na solução nutritiva, embora tenha provocado desorganização no ápice radicular, não impediu o desenvolvimento da planta.

Morphological characterization of Langmuir-Blodgett films from polyaniline and a ruthenium complex (Rupy): influence of the relative concentration of Rupy

We report on the use of dynamic scale theory and fractal analyses in a study of the growth stages of Langmuir-Blodgett (LB) films of polyaniline and a neutral biphosphinic ruthenium complex, namely mer-[ RuCl3 (dppb)(py)] (dppb = 1,4-bis(diphenylphosphine) buthane, py = pyridine), Rupy. The LB films were deposited onto indium-tin-oxide substrates and characterized with atomic force microscopy. From the granular morphology exhibited by the films one could infer growth processes inside and outside the grains. Growth outside was found to follow the Kardar-Parisi-Zhang model, with fractal dimensions of about 2.7. As one would expect, inside the grains the morphology is close to a Euclidian surface with fractal dimension of about 2.

Morphology characterization of layer-by-layer films from PAH/MA-co-DR13: the role of film thickness

We report on the use of dynamic scale theory and fractal analyses in the Study of distinct growth stages of layer-by-layer (LBL) films of poly(allylamine hydrochloride) (PAH) and a side-chain-substituted azobenzene copolymer (Ma-co-DR13). The LBL films were adsorbed oil glass substrates and characterized with atomic force microscopy with the Ma-co-DR13 at the top layer. The ganular morphology exhibited by the films allowed the observation of the growth process inside and outside the grains. The growth outside the grains was found to follow the Kardar-Parisi-Zhang model, with fractal dimensions of ca. 2.6. One could expect that inside the grains the morphology would be close to a Euclidian surface with fractal dimension of ca. 2 for any growth stage. The latter, however, was observed only for thicker films containing more than 10 bilayers. For thinner films the morphology was well described by a self-affine fractal. Such dependence of the growth behavior with the film thickness is associated with a more complete coverage of adsorption sites in thicker films due to diffusion of polymer molecules. (c) 2004 Elsevier B.V. All rights reserved.

Popcorn (Zea mays L. var. everta) yield and yield components as influenced by the timing of broadcast flaming

Farmers are interested in producing popcorn under organic production systems and propane flaming could be a significant component of an integrated weed management program. The objective of this study was to collect baseline information on popcorn tolerance to broadcast flaming as influenced by propane dose and crop growth stage at the time of flaming. Field experiments were conducted at the Haskell Agricultural Laboratory of the University of Nebraska, Concord, NE in 2008 and 2009 using five propane doses (0, 13, 24, 44 and 85 kg ha(-1)) applied at the 2-leaf, 5-leaf and 7-leaf growth stages. Propane was applied using a custom-built research flamer driven at a constant speed of 6.4 km h(-1). Crop response to propane dose was described by log-logistic models on the basis of visual estimates of crop injury, yield components (plants m(-2), ears plant(-1), kernels cob(-1) and 100-kernel weight) and grain yield. Popcorn response to flaming was influenced by the crop growth stage and propane dose. Based on various parameters evaluated, popcorn flamed at the 5-leaf showed the highest tolerance while the 2-leaf was the most susceptible stage. The maximum yield reductions were 45%, 9% and 16% for the 2-leaf, 5-leaf and 7-leaf stages, respectively. In addition, propane doses that resulted in a 5% yield loss were 23 kg ha(-1) for the 2-leaf and 7-leaf and 30 kg ha(-1) for the 5-leaf stage. Flaming has a potential to be used effectively in organic popcorn production if properly used. (C) 2010 Elsevier Ltd. All rights reserved.

Effect of Alternaria cassiae, Pseudocercospora nigricans, and soybean (Glycine max) planting density on the biological control of sicklepod (Senna obtusifolia)

The interactions of two fungal biocontrol agents, Alternaria cassiae and Pseudocercospora nigricans, and soybean planting density on sicklepod mortality and dry weight were studied in the field over 2 yr. The experimental field was divided into three equal areas: one without soybean and two where the soybean was sown in densities of 20 and 36 seeds per meter row with a 0.95-m row spacing. The fungi were sprayed alone or in a mixture at three growth stages of sicklepod plants grown at three levels of crop interference resulting from the three soybean planting densities. The fungal treatments were: an untreated control, A. cassiae (105 spores/m2), P. nigricans (3.3 g mycelium/m2), and the mixture of these two fungi. Sicklepod was at the cotyledonary leaf, two-leaf, and four-leaf stages when treated. Alternaria cassiae was most effective in reducing both sicklepod survival and dry weight. The mixture of P. nigricans and A. cassiae was generally comparable to but not better than A. cassiae alone in killing the weed (mortality) and reducing its growth (dry weight). Soybean density did not have significant effects on the mortality or the dry weight of sicklepod. Thus, there is no advantage to combining the highly effective biocontrol agent A. cassiae with the less effective P. nigricans or with soybean interference to control sicklepod. However, the results validate the efficacy of A. cassiae by itself as a bioherbicide.

Doses e épocas de aplicação de nitrogênio no feijoeiro irrigado cultivado em plantio direto

The nitrogen is the nutrient required in greatest quantities by the bean crop and the response to its application depends on the applied N rate as well as the time of its application. The objective of this work was to evaluate yield components, grain productivity and physiological quality of bean seeds, affected by different nitrogen (urea) rates top-dressed at three crop growth stages. The experiment was conducted in no-till system. The treatments were constituted by 0, 40, 80, 120, 160, 200 and 240 kg ha-1 N top-dressed at V4-5, R5 and R6 growth stages, corresponding to 21, 32 and 38 days after plant emergence, respectively. Seed physiological quality was evaluated by germination and vigor tests. Nitrogen applied at different crop growth stages did not interfere on the yield components, but interfered on bean productivity. Maximum grain productivity was obtained with top-dressed 164 kg ha-1 N, independently of growth stage application. Seed physiological quality was not affected by the treatments, fitting in the category of seeds for commercialization.

Effect of nozzle angle and air-jet parameters in air-assisted sprayer on biological effect of soybean asian rust chemical protection

Aiming at improving the efficiency control of Phakopsora pachyrhizi, this research evaluated different application techniques, using spray deposits and yield parameters of soybean crop. Two experiments were carried out in the experimental area of FCA/UNESP - Botucatu, SP, Brazil, in the soybean crop, Conquista variety, in the 2006/2007 season. The first experiment was arranged in random blocks with eight treatments and four replications. The treatments were conducted in factorial arrangement 4×2 (four air levels 0, 9, 11 and 29 km/h combined at two nozzle angles 0 and 30°) using AXI 110015 nozzles. Ten plants on each plot were selected for sampling spray deposits. Artificial targets were fixed on plants, two in the top and another two in the bottom part of plants (abaxial and adaxial leaf surface each one). For deposit evaluations, a cupric tracer was used and the amount of deposits was determined by a spectrophotometer. The second experiment was carried out in the same place and the treatments were of the same arrangement as the previous experiment, including control treatment (untreated plants). The spraying with triazole fungicide was realized in R2 and R5.2 growth stages of soybean with 142 l/ha spray volume. The nozzle angled of 30° combined with maximum air speed promoted the highest spray deposits on the soybean crop and influenced positively the control of the soybean Asian rust as well in the productivity of this crop.

Assistência de ar e aplicação em volume baixo no controle da ferrugem asiática da soja (Phakopsora pachyrhizi Sydon & Sydon

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Depósito de pulverização em diferentes sistemas de semeadura de soja no manejo da ferrugem asiática

Pós-graduação em Agronomia (Agricultura) - FCA