Ensaios para viabilizar a laminação do bambu dendrocalamus giganteus em operações de torneamento sem centros

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aplicabilidade da metodologia ecodesign à produção de calçados femininos

Pós-graduação em Design - FAAC

Some Physical and Mechanical Properties of Medium-Density Fiberboard Made from Giant Bamboo

The objective of this study was to evaluate the density, density profile, water swelling and absorption, modulus of elasticity and rupture from static bending, and tensile strength of experimental medium-density fiberboards manufactured using Dendrocalamus giganteus (Munro bamboo). The fiber production was carried out through the chemo-thermo-mechanical pulping process with four different conditions. The panels were made with 10% urea formaldehyde resin based on dry weight of the fibers, 2.5% of a catalyzer (ammonium sulfate) and 2% paraffin. The results indicate that treatments with the highest alkali (NaOH) percentage, time and splinter heating temperature improved the physical properties of the panels. The root-fiber interface was evaluated through scanning electron microscopy in fracture zones, which revealed fibers with thick, inflexible walls. The panels' mechanical properties were affected due to the fiber wall characteristics and interaction with resin. Giant bamboo fiber has potential for MDF production, but other studies should be carried out.

Potential of bamboo organosolv pulp as a reinforcing element in fiber-cement materials

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Physical and mechanical properties of particleboard bamboo waste bonded with urea formaldehyde and castor oil based adhesive

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Production of particleboards with bamboo (Dendrocalamus giganteus) reinforcement

The focus of this research was to study the utilization of residues from bamboo (Dendrocalamus giganteus) lamination in the manufacturing of panels for structural purposes. Bamboo particleboards were produced under three conditions: pure boards, reinforced with bamboo laminas, and with treated particles. Castor oil-based polyurethane was the resin binder, in view of using lower toxicity materials. The mechanical tests were performed according to Brazilian Standard (NBR) 14810-3 (2006) and European Standard (EN) 310 (2000). The results were superior to those recommended by these and other standards for internal adhesion resistance, modulus of rupture, and elasticity in static bending, as well as to the results of other studies. Starch treatment was an unnecessary stage. According to the conditions of this process, the studied panels showed a good potential for construction use. Moreover, the bamboo particleboards are an economically viable, environmentally friendly, and sustainable alternative for the use of waste generated during the processing of Dendrocalamus giganteus bamboo species, allied with castor oil-based polyurethane resin. The reinforced particleboard and its production process are being licensed as an Innovation Patent in Brazil, (BR 1020130133919-1-2013).

Developmental Morphology of a Dimorphic Grass Inflorescence: The Brazilian Bamboo Eremitis (Poaceae)

Premise of research.The highly specialized grass inflorescence varies with respect to phyllotaxis, with the reproductive meristem forming primary lateral branches that are either spirally arranged or distichous. The Brazilian bamboo Eremitis is highly unusual in that it has a dimorphic inflorescence, typically composed of an apical gynecandrous whorl of both male and female spikelets and basal whorls of male spikelets. Although not closely related to them, Eremitis shares some structural similarities with some early-divergent grasses.Methodology.We use SEM and LM to describe the development of the reproductive structures of Eremitis to clarify our understanding of the highly specialized grass inflorescence and flower.Pivotal results.Developmental studies show that the inflorescence of Eremitis is actually partially whorled and partially distichous. The apical whorl is abortive. The female spikelet is not terminal on the axis, in contrast with the majority of grasses. All the male spikelets are distichously attached to the inflorescence axis and separated into groups. There is a hollow style with two vascular bundles.Conclusions.The strong morphological similarities between Eremitis and some early-divergent grasses are here supplemented by several anatomical similarities, perhaps due to a shared pollination syndrome.

Evaluation of bamboo particleboards produced with urea-formaldheyde resin

The bamboo waste can be an alternative material to sustain the crescent demand for particleboards, also bringing ecological benefits as reduction of the pressure for raw materials and landfill space demands. In this context, this research aimed to manufacture and determine some physical and mechanical properties of particleboards with bamboo waste particles (Dendrocalamus giganteus), obtained from different sources, bonded with four different percentages of urea–formaldehyde (UF) based resin (6%, 8%, 10% and 12% related to dry material of particles). Response variables investigated were: density; moisture content; thickness swelling in 2 and 24 hours; water absorption in 2 and 24 hours; internal adhesion (STpe); strength in tension parallel to faces (STpa); modulus of elasticity (MOE) and modulus of rupture (MOR). Results permitted to conclude that particleboards as mentioned showed good performance only in the physical properties requirements imposed by Brazilian Standard NBR 14810, but this was not observed to mechanical properties considered. New researches are needed in order to optimize the producing process parameters.

Physical and mechanical characteristic of particleboards produced with residues of sugarcane and stem leaves of bamboo bonded with castor oil adhesive

In this research the aim was produce a particleboard with alternative materials and evaluated its physical and mechanical characteristics. The raw materials used are residues from sucarcane bagasse (SC) (Saccharum officinarum) and stem leaves of bamboo (B) (Dendrocalamus giganteus), bonded with a bi component adhesive based on castor oil. It was produced particleboards with five different traces: 100% SC, 75% SC+25% B, 50% SC+50% B, 25% SC +75%B and 100 % B. Their physical and mechanical characteristics were evaluated accordingly to Brazilian standard NBR 14810-3. Regarding the results obtained, it can be detached that for physical and mechanical evaluation it is evident a negative relation among the amount the sugarcane bagasse and their physical and mechanical characteristics, that is particleboards with low concentrations of sugarcane bagasse had better results. However all particleboards could be recommended for use as sealing particleboards in the segment of civil construction.

Monitoramento do tempo de prensagem e do comportamento da temperatura através da espessura de painéis LVL (Laminated veneer lumber)

The aim of this study was to analyze the behavior of the flow of heat (temperature) through the thickness of panels LVL (Laminated veneer lumber) produced with phenol formaldehyde adhesive, in laboratorial and industrial scales. Experimental program was conducted with five LVL panels (three produced in laboratorial scale and two in industrial scale) with different arrangements of a mix of commercial veneers from tropical pinus from the south region of Sao Paulo State, Brazil, bonded using phenol formaldehyde adhesive. The temperature inside the panels during the pressing process was evaluated using thermocouples type T (cooper-constantan), installed mostly in the center of the glue lines and connected to a data acquisition system. The graphics of temperature as a function of the time showed a gradual increase of temperature up to pre-set values, remaining constant from them. The temperature reached at the center of the panels was adequate to promote the curing of the adhesive. These pre-set values were similar to the minimum values presented by other authors and manufacturers of these adhesives that affirm that temperatures above 100ºC at the center of laminated panels bonded with phenolic adhesives are sufficient to ensure proper cure of the resin. The time necessary for curing of the adhesives confirmed the validity of practical expressions provided by adhesive manufacturers.

Cutaneous Basophilia in the Resistance of Goats to Amblyomma cajennense Nymphs after Repeated Infestations

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção de tomate em função da vibração das plantas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

3-D reconstruction by extended depth-of-field in failure analysis - Case study II: Fractal analysis of interlaminar fracture in carbon/epoxy composites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of fatigue behavior on repaired carbon fiber/epoxy composites

The continuous use of structural polymer composites in aeronautical industry has required the development of repairing techniques of damages found in different types of laminates. The most usually adopted procedure to investigate the repair of composite laminates has been by repairing damages simulated in laminated composite specimens. This work shows the influence of structural repair technique on mechanical properties of a typical carbon fiber/epoxy laminate used in aerospace industry. When analyzed by tensile test, the laminates with and without repair present tensile strength values of 670 and 892 MPa, respectively, and tensile modulus of 53.0 and 67.2 GPa, respectively. By this result, it is possible to observe a decrease of the measured mechanical properties of the repaired composites. When submitted to fatigue test, it is observed that in loads higher than 250 MPa, this laminate presents a low life cycle (lower than 400,000 cycles). The fatigue performance of both laminates is comparable, but the non-repaired laminate presented higher tensile and fatigue resistance when compared with the repaired laminate.

Clues to the presence of pathogenic fungi in certain environments

The presence of various pathogenic fungi in rather unsuspected hosts and environments has always attracted the attention of the scientific community. Reports on the putative role of animals in fungal infections of humans bear important consequences on public health as well as on the understanding of fungal ecology. Fungi are ubiquitous in nature and their great capacity for adaptation allows them to survive and indeed, to thrive, in plants, trees and other natural substrata. Nonetheless, we are just beginning to learn the significance that these diverse fungal habitats have on the increasing number of immunosuppressed individuals. The accidental or permanent presence of fungi in animals, plants, soils and watercourses should not be taken too lightly because they constitute the source where potential pathogens will be contracted. If those fungal habitats that carry the largest risks of exposure could be defined, if seasonal variations in the production of infectious propagules could be determined, and if their mode of transmission were to be assessed, it would be possible to develop protective measures in order to avoid human infection. Additionally, unsuspected avenues for the exploration of fungal survival strategies would be opened, thus enhancing our capacity to react properly to their advancing limits. This paper explores several ecological connections between human pathogenic fungi and certain animals, trees, waterways and degraded organic materials. The occurrence of such connections in highly endemic areas will hopefully furnish more precise clues to fungal habitats and allow the design of control programs aimed at avoiding human infection.