Caracterização e classificação de solos em uma topossequência sobre calcário na serra da Bodoquena, MS

A serra da Bodoquena, localizada no Estado do Mato Grosso do Sul, apresenta particularidades nos seus solos, que diferem de outras regiões do bioma cerrado-pantanal. Este trabalho teve como objetivo ampliar o conhecimento dos solos formados sobre calcário, por meio da caracterização dos seus atributos físicos, químicos, mineralógicos e da matéria orgânica. Foi selecionada uma topossequência sobre calcário, onde foram abertas trincheiras no topo (P1), terço inferior (P2), sopé (P3) e baixada (P4 e P5). Os perfis foram descritos morfologicamente e analisados os atributos físicos, químicos e mineralógicos dos horizontes. de acordo com o Sistema Brasileiro de Classificação de Solos, os solos estudados foram classificados como: (P1) Organossolo Fólico Sáprico lítico - OOs; (P2) Chernossolo Háplico Órtico típico - MXo; (P3) Chernossolo Argilúvico Órtico típico - MTo; (P4) Gleissolo Melânico Carbonático chernossólico - GMk1; e (P5) Gleissolo Melânico Carbonático organossólico - GMk2. Todos os perfis estudados apresentaram cores escuras nos horizontes superficiais e mais avermelhadas ou acinzentadas em profundidade, em razão da drenagem, sempre associados com elevados valores de saturação por bases e tendo o cálcio como cátion predominante no complexo sortivo. Das frações húmicas, a humina representou a maior fração do carbono orgânico em todos os solos. A análise mineralógica constatou a presença de calcita na fração areia nos perfis GMk1 e GMk2 e caulinita, illita e montmorilonita, na fração argila de todos os solos. A ocorrência do Organossolo Fólico em ambiente não altimontano, diferente do relatado pelo Sistema Brasileiro de Classificação de Solos, sugere maior amplitude das condições ambientais para a ocorrência dessa subordem.

Diuron lacks promoting potential in a rat liver bioassay

The promoting activity of the herbicide Diuron was evaluated in a medium-term rat liver carcinogenesis bioassay that uses as endpoint immunohistochemically identified glutathione S-transferase positive (GST-P+) foci. Male Wistar rats were allocated to the following groups: G1 to G6 were initiated for liver carcinogenesis by a single dose of diethylnitrosamine (DEN, 200 mg/kg) while groups G7 and G8 received only 0.9% NaCl (DEN vehicle). From the 2nd week animals were fed a basal diet (G1 and G7) or a diet added with Diuron at 125, 500, 1250, 2500 and 2500 ppm (G2 to G5 and G8, respectively) or 200 ppm Hexaclorobenzene (HCB; G6). The animals were submitted to 70% partial hepatectomy at the 3rd week and sacrificed at the 8th week. The herbicide did not alter ALT or creatinine serum levels. No conspicuous GST-P+ foci development was registered in non-initiated rats fed Diuron at 2500 ppm. While DEN-initiated animals fed Diuron at 1250 or 2500 ppm developed mild centrilobular hypertrophy, DEN-initiated HCB-fed animals showed severe liver centrilobular hypertrophy and significant GST-P+ foci development. These findings indicate that the medium-term assay adopted in this study does not reveal any liver carcinogenesis initiating or promoting potential of Diuron in the rat.

Tendência genética em pesos e ganhos em peso de bovinos da raça Guzerá

The main objective of this study was to estimate genetic and phenotypic trends in weights at birth (BW), 8 (W8) and 12 months (W12) of age; and also in the daily gains from birth to 8 months (G8) and from birth to 12 months (G12) for the ''Guzera'' cattle herd from the ''Fazenda de Ensino e Pesquisa do Campus de Ilha Solteira'', UNESP, at Selviria, MS, in the Central-West region of Brazil. The data were collected between 1979 and 1984 from 842 calves, sired by 22 sires. Genetic trends were estimated by three alternative procedures, two of them were based on the methodology of repeated use of sires and the other procedure on the differences in the average genetic values of sires in the different years. The phenotypic annual changes estimated were -0.232 kg, -8.278 kg, -0.033 kg, -8.498 kg e -0.023 kg, for BW, W8, G8, W12 and G12, respectively. The estimates of genetic trends, obtained by the three procedures were different, but showed that genetic changes for all analised traits were little.

Modulation of intercellular communication in macrophages: possible interactions between GAP junctions and P2 receptors

Gap junctions are connexin-formed channels that play an important role in intercellular communication in most cell types. In the immune system, specifically in macrophages, the expression of connexins and the establishment of functional gap junctions are still controversial issues. Macrophages express P2X(7) receptors that, once activated by the binding of extracellular ATP, lead to the opening of transmembrane pores permeable to molecules of up to 900 Da. There is evidence suggesting an interplay between gap junctions and P2 receptors in different cell systems. Thus, we used ATP-sensitive and -insensitive J774.G8 macrophage cell lines to investigate this interplay. To study junctional communication in J774-macrophage-like cells, we assessed cell-to-cell communication by microinjecting Lucifer Yellow. Confluent cultures of ATP-sensitive J774 cells (ATP-s cells) are coupled, whereas ATP-insensitive J774 cells (ATP-i cells), derived by overexposing J774 cells to extracellular ATP until they do not display the phenomenon of ATP-induced permeabilization, are essentially uncoupled. Western-blot and reverse-transcription polymerase chain reaction assays revealed that ATP-s and ATP-i cells express connexin43 (Cx43), whereas only ATP-s cells express the P2X(7) receptor. Accordingly, ATP-i cells did not display any detectable ATP-induced current under whole-cell patch-clamp recordings. Using immunofluorescence microscopy, Cx43 reactivity was found at the cell surface and in regions of cell-cell contact of ATP-s cells, whereas, in ATP-i cells, Cx43 immunoreactivity was only present in cytosolic compartments. Using confocal microscopy, it is shown here that, in ATP-s cells as well as in peritoneal macrophages, Cx43 and P2X(7) receptors are co-localized to the membrane of ATP-s cells and peritoneal macrophages.

Lidocaine effects on corneal endothelial cell ultrastructure

The purpose of this study was to determine whether intracameral commercial lidocaine 2% induces alterations on the rabbit corneal endothelium. Forty white rabbits received different substances inside the anterior chamber: group (G)1, no substance; G2 and G3 received lidocaine 2% with preservative in aqueous solution; G4 and G5, lidocaine 2% with preservative in gel solution; G6 and G7, the anesthetic preservative (metilparahydroxybenzoate 0.1%); and G8 and G9, lidocaine 2% without preservative in aqueous solution. The animals from G2, 4, 6 and 8 were sacrificed after 1 h, and from G3, 5, 7 and 9 after 24 h after injection of the substance inside the anterior chamber. The corneas were clinically evaluated and assessed by transmission and scanning electron microscopy. G1, 2, 6, 7, 8 and 9 animals had very similar characteristics in clinical, ultrastructural and morphometric evaluations; the G3 and G4 animals showed discrete edema and one animal in G5 had intense corneal edema. We conclude that lidocaine 2% with preservative induces few ultrastructural alterations in the corneal endothelial cells.

Anomaloterga mantiqueirae: a new genus and species of Strogulomorphini from the Mantiqueira fault escarpment, Brazil (Orthoptera, Phalangopsidae, Strogulomorphini).

A new genus and species of cricket, Anomaloterga mantiqueirae, here described, is the first representative of Strogulomorphini to be reported from Brazil. The specimens were collected at night from the lower portions of live tree trunks in a summit forest located on the Mantiqueira Fault Escarpment, State of São Paulo.

Evaluation of the flexural strength of carbon fiber-, quartz fiber-, and glass fiber-based posts

This study investigated the flexural strength of eight fiber posts (one carbon fiber, one carbon/quartz fiber, one opaque quartz fiber, two translucent quartz fiber, and three glass fiber posts). Eighty fiber posts were used and divided into eight groups (n = 10): G1: C-POST (Bisco); G2: ÆSTHETI-POST (Bisco); G3: ÆSTHETI-PLUS (Bisco); G4: LIGHT-POST (Bisco); G5: D.T. LIGHT-POST (Bisco); G6: PARAPOST WHITE (Coltene); G7: FIBERKOR (Pentron); G8: REFORPOST (Angelus). All of the samples were tested using the three-point bending test. The averages obtained were submitted to the ANOVA and to Tukey's test (p < 0.05). The mean values (MPa) of the groups ÆSTHETI-POST - carbon/ quartz fiber post (Bisco) and ÆSTHETI-PLUS - quartz fiber post (Bisco) were statistically similar and higher than the mean values of the other groups. The mean values of the groups C-POST - carbon fiber post (Bisco), LIGHT-POST - translucent quartz fiber post (Bisco), D.T. LIGHT-POST - double tapered translucent quartz fiber post (Bisco), PARAPOST WHITE - glass fiber post (Coltene) and FIBREKOR - glass fiber post (Pentron) were similar and higher than the group REFORPOST - glass fiber post (Angelus). Copyright © 2005 by the American Association of Endodontists.

Production of monoclonal antibodies against Streptococcus mutans antigens

Several studies have been conducted in the last decades aiming to obtain an anti-canies vaccine, however some studies have demonstrated cross reactivity between Streptococcus mutans surface antigens and the human cardiac tissue. In this work, the reactivity of five anti-Streptococcus mutans monoclonal antibodies (MoAb) (24A, 56G, G8, E8 and F6) was tested against oral streptococci, cardiac antigens and skeletal and cardiac myosins, aiming to evaluate the specificity of these MoAb. The hybrid producers of immunoglobulins of the IgG 2b class were cloned by limit dilution and expanded in vivo. MoAb were tested by ELISA. The hybrid 24A reacted with S. mutans CCT 1910, S. salivarius CCT 0365 and S. pyogenes T23. No reactivity difference was observed among the tested species. Cross reactivity with heart and cardiac myosin was not confirmed and only reaction with myosin of skeletal muscle was observed (p = 0.0381). The hybrid 56G reacted with all the tested microorganisms and there was statistically significant difference between S. mutans and S. pyogenes T23 (p < 0.001). This hybrid also reacted with myosin of skeletal muscle (p = 0.0095). C8, E8 and F6 presented low reactivity against oral streptococci strains and no reactivity against cardiac antigens. The data of this study showed that the 24A and 56G anti-S. mutans MoAb presented reactivity with S. pyogenes and S. salivarius, reinforcing the occurrence of common antigens between these species. The tested MoAb presented low cross-reactivity with myosin of skeletal muscle, but anti-heart activity could not be confirmed.

Interaction between total-etch and self-etch adhesives and conventional and self-adhesive resin cements

The aim of this study was to compare the bond strength to enamel between resin cements combined with total-etch and self-etch adhesive systems and a self-adhesive cement. Eighty bovine incisors had their buccal surface ground flat exposing a plane area in the enamel. Eighty Artglass resin cylinders measuring 3 mm in diameter and 4 mm in height were fabricated. The teeth were divided into eight groups of 10 teeth each and the resin cylinders were cemented with different adhesive systems and resin cements; G1: RelyX Unicem (self-adhesive cement); G2: H 3PO 4 + Single Bond + RelyX ARC; G3: AdheSE + Variolink II; G4: H 3PO 4 + Excite + Variolink II; G5: Xeno III + Enforce; G6: H 3PO 4 + Prime&Bond NT + Enforce; G7: Biatite Primers 1 and 2 + Bistite II DC; G8: H 3PO 4 + Bistite Primers 1 and 2 + Bistite II DC. After application of the adhesives, the cylinders were cemented according to manufacturer instructions. The specimens were submitted to 2000 thermal cycles at a temperature ranging from 5±5°C to 55±5°C, and shear bond strength was then tested at a variety of 1 mm/min. The data were analyzed by ANOVA and the Tukey's test (á=5%), obtaining a p value of 0.00. The following mean (±standard deviation) bond strength values were observed for each group: G1: 5.14(±0.99)a; G3: 16.23(±4.69)b; G7: 17.82(±3.66)b; G5: 18.48(±2.88)bc; G8: 20.15(±4.12)bc; G4: 22.85(±3.08)cd; G2: 24.96(±2.89)d; G6: 26.07(±1.69)d. Groups followed by the same letters did not differ significantly. For most of the resin cements tested, the application of adhesive systems using acid etching resulted in a higher bond strength when compared to the self-etch adhesive systems and to the self-adhesive cement.

Changes on transmittance mode of different composite resins

The purpose of this study was to evaluate the transmittance of seven different composite resins. Ten specimens were prepared (10 mm diameter, 2 mm thickness) for each experimental group, as follows: G1- Charisma® A 2 (Heraeus-Kulzer); G2- Filtek™ Supreme A 2E (3M/ESPE); G3- Filtek™ Supreme A2B (3M/ESPE); G4-Filtek™ Supreme YT (3M/ESPE); G5- Esthet-X® A2 (Dentsply); G6- Esthet-X® YE (Dentsply); G7- Durafill® A 2 (Heraeus-Kulzer) and G8- Filtek™ Z-100 A2 (3M/ESPE). The transmittance mode was measured using a UV-visible spectrophotometer (Cary Instruments) at 400-760 nm. The specimens were evaluated at three different times: zero hour (initial), 24 hours and 10 days after immersion in artificial saliva. The differences in transmittance were determined by two-way analysis of variance (ANOVA) and Tukey's test. The various composite resins showed significant differences in the wavelength dependence of transmittance. The mean values of transmittance increased significantly, with wavelengths increasing from 400 to 760 nm. The performance of the experimental groups was similar in terms of immersion time, considering that at time zero and after 10 days, all the groups showed similar results, which were statistically higher than the values obtained after 24 hours of immersion. The Filtek™ Supreme YT composite resin presented the highest mean transmittance values along the wavelengths at the three measured times. Esthet-X® YE and Durafill® yielded similar mean transmittance values, which were higher than those of the other groups. This study shows that the transmittance values of composite resins are directly related with the type, size and amount of inorganic filler particles.

Influence of desensitizing agents on the microshear bond strength of adhesive systems to dentin.

The aim of this study was to evaluate the effect of desensitizing agents on the micro-shear bond strength of adhesive systems to dentin. Forty bovine teeth were divided into 8 groups (n=5): G1--Single Bond (SB); G2--GH.F + SB; G3-- Desensibilize + SB; G4--essensiv + SB; G5 --ingle Bond 2 (SB2); G6--H.E + SB2; G7--esensibilize + SB2; G8--Dessensiv + SB2. In all of the groups, the desensitizing agents were applied after phosphoric acid etching and before the dentin adhesive application. Z250 composite resin tubes were bonded on the treated surface. After 24 hours, the teeth were tested in a universal machine. Data were submitted to ANOVA and Tukey's test (5%). The results showed that the groups where Desensibilize and Dessensiv were applied exhibited smaller bond strength values.

Pulp tissue dissolution when the use of sodium hypochlorite and EDTA alone or associated

Purpose: The aim of the present study was to evaluate the tissue dissolving capacity of various concentrations of sodium hypochlorite either alone or in combination with 17% EDTA. Methods: Eighty bovine pulp fragments were prepared, and their weight was determined using a precision balance. Each pulp fragment was immersed for 2 hours in a solution/mixture that was based on the following groups: G1-saline solution; G2-0.5% NaOCl; G3-1.0% NaOCl; G4-2.5% NaOCl; G5-17% EDTA; G6-0.5% NaOCl+17% EDTA; G7-1.0% NaOCl+ 17% EDTA; and G8-2.5% NaOCl+17% EDTA. The final weight was measured, and the weight loss was calculated. A statistical analysis was performed using either the Student's t-test for paired samples or an ANOVA and Tukey tests (P<0.05 was considered to be significant). Results: We measured a significant difference between the sample weight before and after treatment for each of the tested groups (P<0.05). The 2.5% sodium hypochlorite solution (G4) completely dissolved the pulp tissue within the test period. NaOCl+EDTA was less effective than sodium hypochlorite alone at dissolving the pulp tissue (P<0.05), and EDTA alone (G5) did not markedly dissolve the pulp tissue. Conclusion: Using EDTA together with NaOCl reduced the tissue dissolving properties compared with NaOCl alone, regardless of the concentration of NaOCl that was used. © 2011 Só et al.; licensee EDIPUCRS.

Effect of bleaching on sound enamel and with early artificial caries lesions using confocal laser microscopy

The aim of this study was to evaluate effect of bleaching agents on sound enamel (SE) and enamel with early artificial caries lesions (CL) using confocal laser scanning microscopy (CLSM). Eighty blocks (4 × 5 × 5 mm) of bovine enamel were used and half of them were submitted to a pH cycling model to induce CL. Eight experimental groups were obtained from the treatments and mineralization level of the enamel (SE or CL) (n=10). SE groups: G1 - unbleached (control); G2 - 4% hydrogen peroxide (4 HP); G3 - 4 HP containing 0.05% Ca (Ca); G4 - 7.5% hydrogen peroxide (7.5 HP) containing amorphous calcium phosphate (ACP). CL groups: G5 - unbleached; G6 - 4 HP; G7 - 4 HP containing Ca; G8 - 7.5 HP ACP. G2, G3, G6, G7 were treated with the bleaching agents for 8 h/day during 14 days, while G4 and G8 were exposed to the bleaching agents for 30 min twice a day during 14 days. The enamel blocks were stained with 0.1 mM rhodamine B solution and the demineralization was quantified using fluorescence intensity detected by CLSM. Data were analyzed using ANOVA and Fisher's tests (α=0.05). For the SE groups, the bleaching treatments increased significantly the demineralization area when compared with the unbleached group. In the CL groups, no statistically significant difference was observed (p>0.05). The addition of ACP or Ca in the composition of the whitening products did not overcome the effects caused by bleaching treatments on SE and neither was able to promote remineralization of CL.

Pulpal and periodontal diseases increase triglyceride levels in diabetic rats

Objectives: The aim of this study was to evaluate triglyceride and cholesterol levels in diabetic rats and their relationship with pulpal and periodontal diseases. Methods: Eighty male rats (Rattus norvegicus albinus, Wistar) were divided into the following eight groups comprising ten animals each: normal rats (G1), rats with pulpal diseases (G2), rats with periodontal diseases (G3), rats with both pulpal and periodontal diseases (G4), diabetic rats (G5), diabetic rats with pulpal diseases (G6), diabetic rats with periodontal diseases (G7), and diabetic rats with both periodontal and pulpal diseases (G8). Diabetes was induced by injecting streptozotocin, periapical lesions were induced by exposing pulpal tissue to the oral environment, and periodontal diseases were induced by periodontal ligature. The animals were killed after 30 days, and lipid profile was enzymatically measured using Trinder's method. The total assessed values were statistically analyzed by analysis of variance and Tukey test (p < 0.05). Results: The triglyceride levels of diabetic rats with periodontal disease and of diabetic rats with both periodontal and pulpal diseases were significantly higher than those of normal rats and nondiabetic group rats, respectively. The differences in the cholesterol levels among the groups were not significant. Conclusions: We found that the association of pulpal and periodontal diseases with diabetes increased triglyceride levels in rats. Clinical significance: Changes in lipid profile may be related to the presence of oral infections and diabetes. © 2012 Springer-Verlag Berlin Heidelberg.

Effects of cement-curing mode and light-curing unit on the bond durability of ceramic cemented to dentin

The aim of this study was to evaluate the effects of different light-curing units and resin cement curing types on the bond durability of a feldspathic ceramic bonded to dentin. The crowns of 40 human molars were sectioned, exposing the dentin. Forty ceramic blocks of VITA VM7 were produced according to the manufacturer's recommendations. The ceramic surface was etched with 10% hydrofluoric acid/60s and silanized. The dentin was treated with37% phosphoric acid/15s, and the adhesive was applied. The ceramic blocks were divided and cemented to dentin according to resin cement/RC curing type(dual-and photocured), light-curing unit (halogen light/QTH and LED), and storage conditions (dry and storage/150 days + 12,000 cycles/thermocycling). All blocks were stored in distilled water (37°C/24h) and sectioned (n = 10): G1-QTH + RC Photo, G2-QTH + RC Dual, G3-LED + RC Photo, G4-LED + RC Dual. Groups G5, G6, G7, and G8 were obtained exactly as G1 through G4, respectively, and then stored and thermocycled. Microtensile bond strength tests were performed (EMIC), and data were statistically analyzed by ANOVA and Tukey's test (5%). The bond strength values (MPa) were: G1-12.95 (6.40)ab; G2-12.02 (4.59)ab; G3-13.09 (5.62)ab; G4-15.96 (6.32)a; G5-6.22 (5.90)c; G6-9.48 (5.99)bc; G7-12.78 (11.30)ab; and G8-8.34 (5.98)bc. The same superscript letters indicate no significant differences. Different light-curing units affected the bond strength betweenceramic cemented to dentin when the photocured cement was used, and only after aging (LED>QTH). There was no difference between the effects of dual-and photo-cured resin-luting agents on the microtensile bond strength of the cement used in this study.