Metallurgical evaluation of a copper-based alloy for dental castings.

The present study was designed to evaluate the metallurgical properties of an experimental, low-cost copper-zinc-aluminum-nickel alloy for dental castings. Some specimens were subjected to heat treatment after induction casting. The extent of corrosion was determined by measuring weight loss of specimens stored in a sodium sulfite solution. In the as-cast specimens, tests demonstrated the presence of three phases: the first consisted of copper-zinc-aluminum, the second was similar but lower in copper and aluminum, and the third consisted of an intermetallic compound of manganese-nickel-phosphorus. After heat treatment, the first phase remained relatively constant, the second was converted to Cu3Al, and the third increased in volume. The weight loss from the as-cast specimens was eight times that of the heat-treated specimens. It was concluded that the heat treatment substantially changed the microstructure and improved the corrosion resistance of the experimental alloy.

Psychological evaluation of patients scheduled for orthognathic surgery.

Using a questionnaire, 41 patients scheduled for orthognathic surgery were evaluated pre- and postoperatively to determine some of their psychological characteristics and treatment outcome from the patient's standpoint. Among other conclusions, the results showed that some patients may not fully understand the details of their deformity, despite a full explanation by the orthodontist and surgeon. Expectations regarding treatment outcome may be unrealistic even in patients with valid self-motivation for surgery. Social adjustment usually improves after treatment. Functional changes were noticed by over 80% of the patients and esthetic changes in over 90%.

Toxicologic evaluation of acute and subacute oral administration of Cucurbita maxima seed extracts to rats and swine

The extract prepared from dried seeds of Cucurbita maxima was administered to rats and pigs. Following a single dose or 4 weeks of daily oral administration, the extract produced no changes in serum glucose, urea, creatinine, total protein, uric acid, GOT, GPT, LDH or blood counts. Urine analysis (urea, uric acid, creatinine, total protein, Na and K), as well as histopathological investigation, showed no abnormalities. These results taken as a whole indicate that the seeds of C. maxima as used in Brazilian folk medicine are not toxic for rats and swine.

Clinical evaluation of amitriptyline for the control of chronic pain caused by temporomandibular joint disorders

Temporomandibular disorder (TMD) is characterized by a combination of symptoms affecting the temporomandibular joint and/or chewing muscles. The two most common clinical TMD symptoms are pain and dysfunction. Pain is usually caused by dysfunction, and emergency therapy has focused on controlling it. Recent investigations into TMD have led to the recommendation of antidepressants as a supporting treatment against constant neuralgic pain. The aim of this double-blind study was to verify the efficiency of antidepressants (amitriptyline) as a support in the treatment of chronic TMD pain. Twelve female volunteers presenting chronic TMD pain were divided into two groups and treated for 14 days: Group 1 with 25 mg/day of amitriptyline and Group 2 with a placebo. The intensity of pain and discomfort was evaluated daily, using a visual analog scale (VAS), over a period of seven days preceding the treatment (baseline), during the 14-day treatment, and for seven days after the treatment. The results revealed a significant reduction of pain and discomfort in Group 1 (75%) compared to Group 2 (28%) during the three weeks beginning at baseline (p< 0.01). Amitriptyline proved to be an efficient alternative treatment for chronic pain in TMD patients. Copyright © 2003 by CHROMA, Inc.

Nutritional support and outcome in hospitalized dogs and cats

This study investigated the effect of assisted nutritional support on the outcome and time of hospitalization (TH) of dogs and cats. The study compared two groups of 400 hospitalized animals. The animals in group 1 did not receive assisted nutritional support because they were hospitalized before the clinical nutrition service was implemented; animals in group 2 were nutritionally managed. Animals in group 1 received a low-cost diet with no consumption control. Group 2 animals had their maintenance energy requirement (MER) calculated, received a high-protein and high-energy super-premium diet, had their caloric intake (CI) monitored, and received enteral and parenteral nutritional support when necessary. The statistical analysis of the results included the standard T test (group 1 versus group 2) and chisquare and Spearman's correlation to evaluate group 2 (CI and outcome, body condition score (BCS) and outcome, BCS and CI). For group 2, favorable outcome (FO), defined as the percent responding to therapy and dis-charged from the hospital, was 83%, and the TH was 8.59 days. These values were lower (P < .001) for group 1 (63.2% FO and TH of 5.7 days). For group 2, 65.5% of the animals received voluntary consumption (93.1% outcome), 14.5% received enterai support (67.9% FO), 6.5% received parenteral support (68% FO), and 6.17% did not eat (38.5% FO), demonstrating an association between the type of nutritional support and outcome (P < .01). Group 2 animals that received 0% to 33% of their MER had 62.9% FO, and those receiving more than 67% had 94.3% FO, which shows that lower mortality rates are associated with higher CI (P < .001). TH was higher for animals with higher CI (P < .001). The BCS did not correlate with Cl (P > .05) but did correlate with outcome (P < .01). FO was 68.7% for animals with low BCS, 85.7% for animals with ideal BCS, and 86.6% for overweight animals. Nutritional support could allow for longer therapies, thus increasing the TH and FO rate.

Environmental evaluation of cogeneration scenarios in sugar industry

The development of new techniques that allow the analysis and optimization of energy systems bearing in mind environmental issues is indispensable in a world with finite natural resources and growing demand of energy. Among the energy systems that deserve special attention, cogeneration in the sugar industry must be pointed out, because it uses efficiently a common fuel for generation of useful heat and power. Within this frame, thermoeconomical optimization - 2nd Law of Thermodynamics analysis by exergy function and economic evaluation of the thermal system - gradually is taking importance as a powerful tool to assist to the decision making process. Also, the explicit consideration of environmental issues offers a better way to explore trade-offs between different aspects to support the decisions that must be made. In this work it is used the technique of Life Cycle Analysis (LCA) which allows to consider environmental matters as an integral part of the problem, in opposite to most of the environmental approaches that only reduce residuals generation , without taking into account impacts associated to other related processes. On the other hand, the consideration of environmental issues in optimization of energy systems is a novel and promissory contribution in the state of the art of energy optimization and LCA. The system under study is a sugar plant of Tucumán (Argentina) given the particular importance that this industry had inside the regional economy of the Argentinean Northwest. Although cogeneration comes being used a while ago in sugar industry, being the main objective the generation of heat and as secondary objective the electric power generation and mechanic power to cover several needs of working machineries, to the date it is no available a versatile tool that allows to analyze economical feasible alternatives bearing in mind environmental issues. At sugar plants, steam is generated in boilers using as fuel bagasse - cellulosic fiber waste obtained crushing the sugar cane- and it is used to give useful heat and shaft work to the plant, but it can also be used to generate electricity with export opportunities to the electrical network. The great number of process alternatives outlines a serious decision making problem in order to take advantage of the resources. Although the problem turns out to be a mixed non-linear problem (MINLP), the main contribution of this work is the development of a hybrid strategy to evaluate cogeneration alternatives that combines optimization approaches with environmental indicators. This powerful tool for its versatility and robustness to analyze cogeneration systems, will be of great help in the decision making process, because of their easy implementation to analyze the kind of problems presented in the sugar industry.

Evaluation of integrated inverter topologies for low power PV systems

This work presents the stage integration in power electronics converters as a suitable solution for solar photovoltaic inverters. The rated voltages available in Photovoltaic (PV) modules have usually low values for applications such as regulated output voltages in stand-alone or grid-connected configurations. In these cases, a boost stage or a transformer will be necessary. Transformers have low efficiencies, heavy weights and have been used only when galvanic isolation is mandatory. Furthermore, high-frequency transformers increase the converter complexity. Therefore, the most usual topologies use a boost stage and one inverter stage cascaded. However, the complexity, size, weight, cost and lifetime might be improved considering the integration of both stages. These are the expected features to turn attractive this kind of integrated structures. Therefore, some integrated converters are analyzed and compared in this paper in order to support future evaluations and trends for low power single-phase inverters for PV systems. © 2011 IEEE.

Power Electronics course: Analysis and evaluation of the educational software and the environment learning

This paper presents the analysis and evaluation of the Power Electronics course at So Paulo State University-UNESP-Campus of Ilha Solteira(SP)-Brazil, which includes the usage of interactive Java simulations tools and an educational software to aid the teaching of power electronic converters. This platform serves as an oriented course for the lectures and supplementary support for laboratory experiments in the power electronics courses. The simulation tools provide an interactive and dynamic way to visualize the power electronics converters behavior together with the educational software, which contemplates the theory and a list of subjects for circuit simulations. In order to verify the performance and the effectiveness of the proposed interactive educational platform, it is presented a statistical analysis considering the last three years. © 2011 IEEE.

An Educational international partnership responding to local needs: Process evaluation of the Brazil FAIMER Regional Institute

The Brazilian public health system requires competent professionals sensitive to the needs of the population. The Foundation for Advancement of International Medical Education and Research (FAIMER) provides a two-year faculty development programme for health professions educators, aiming to build leadership in education to improve health. A partnership with governmental initiatives and FAIMER was established for meeting these needs. This paper describes the initial process evaluation results of the Brazilian FAIMER Institute Fellowship (FAIMER BR). Methods: Data were analysed for the classes 2007-2010 regarding: application processes; innovation project themes; retrospective post-pre self-ratings of knowledge acquisition; and professional development portfolios. Results: Seventeen of 26 Brazilian states were represented among 98 Fellows, predominantly from public medical schools (75.5%) and schools awarded Ministry of Health grants to align education with public health services (89.8%). One-third (n = 32) of Fellows' innovation projects were related to these grants. Significant increases occurred in all topic subscales on self-report of knowledge acquisition (eff ect sizes, 1.21-2.77). In the follow up questionnaire, 63% of Fellows reported that their projects were incorporated into the curriculum or institutional policies. The majority reported that the programme deepened their knowledge (98%), provided new ideas about medical education (90%) and provided skills for conflict management (63%). One-half of the Fellows reported sustained benefits from the programme listserv and other communications, including breadth of expertise, establishment of research collaboration and receiving emotional support. Conclusion: Contributors to initial programme success included alignment of curriculum with governmental initiatives, curriculum design merging educational technology, leadership and management skills and central role of an innovation educational project responding to local needs.

Computational support for the process of software requirement specification

The software industry has become more and more concerned with the appropriate application of activities that composes requirement engineering as a way to improve the quality of its products. In order to support these activities, several computational tools have been available in the market, although it is still possible to find a lack of resources related to some activities. In this context, this paper proposes the inclusion of a module to aid in the requirements specification to a tool called Requirements Elicitation Support Tool. This module allows to specify requirements in accordance with IEEE 830 standard, thus contributing to the documentation of the requirements established for a software system, besides supporting the learning of concepts related to the requirements specification, which improves the skills of users of the tool. © 2012 IEEE.

Evaluation of late vegetative and reproductive stage soybeans for resistance to soybean aphid (hemiptera: Aphididae)

The soybean aphid, Aphis glycines Matsmura, has become the most significant soybean [Glycine max (L.) Merrill] insect pest in the north central soybean production region of North America. The objectives of this research were to measure selected genotypes for resistance to the soybean aphid in the later vegetative and reproductive stages under field conditions, and confirm the presence of tolerance in KS4202. The results from 2007 to 2011 indicate that KS4202 can support aphid populations with minimal yield loss at levels where significant yield loss would be expected in most other genotypes. The common Nebraska cultivar, 'Asgrow 2703′, appears to show signs of tolerance as well. None of the yield parameters were significantly different between the aphid infested and noninfested treatments. Based on our results, genotypes may compensate for aphid feeding in different ways. Asgrow 2703 appears to produce a similar number of seeds as its noninfested counterpart, although the seeds produced are slightly smaller. Field evaluation of tolerance in KS4202 indicated a yield loss of only 13% at 34,585-53,508 cumulative aphid-days, when 24-36% yield loss would have been expected. © 2013 Entomological Society of America.

Tilted and Short Implants Supporting Fixed Prosthesis in an Atrophic Maxilla: A 3D-FEA Biomechanical Evaluation

Purpose: This study compared the biomechanical behavior of tilted long implant and vertical short implants to support fixed prosthesis in an atrophic maxilla. Materials and Methods: The maxilla model was built based on a tomographic image of the patient. Implant models were based on micro-computer tomography imaging of implants. The different configurations considered were M4S, four vertical anterior implants; M4T, two mesial vertical implants and two distal tilted (45°) implants in the anterior region of the maxilla; and M6S, four vertical anterior implants and two vertical posterior implants. Numerical simulation was carried out under bilateral 150N loads applied in the cantilever region in axial (L1) and oblique (45°) (L2) direction. Bone was analyzed using the maximum and minimum principal stress (σmax and σmin), and von Mises stress (σvM) assessments. Implants were analyzed using the σvM. Results: The higher σmax was observed at: M4T, followed by M6S/L1, M6S/L2, M4S/L2, and M4S/L1 and the higher σvM: M4T/L1, M4T/L2 and M4S/L2, M6S/L2, M4S/L1, and M6S/L1. Conclusions: The presence of distal tilted (all-on-four) and distal short implants (all-on-six) resulted in higher stresses in both situations in the maxillary bone in comparison to the presence of vertical implants (all-on-four). © 2013 Wiley Periodicals, Inc.

Environmental fragility evaluation and guidelines for environmental zoning: a study case on Ibiuna (the Southeastern Brazilian region)

Environmental fragility models are important decision tools for policy makers as they help quantify environmental sensitivity and understand the relationship between human activities and environmental quality. The objective of this study was to evaluate three different environmental fragility models within the Brazilian rainforest region and to use the results to develop environmental zone classes. Two rural river basins located in Ibiuna, Sao Paulo state, Brazil, were studied. Input variables, including slope class, relief dissection rate, soil class, lithology, land cover, and climate data, were used to compute environmental fragility classes using three standard models. The model outputs were evaluated on their ability to accurately predict the most sensitive and least sensitive areas. The best models for each region were used to derive environmental zoning maps, including restoration priorities, best regions for agriculture, and areas with high needs for soil management. These maps will help support land use strategies for environmental restoration. This study provides insight into territorial ordering and management of environmental services with a regional perspective.

Clinical evaluation of failures in removable partial dentures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of early changes induced by diuron in the rat urinary bladder using different processing methods for scanning electron microscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)