Comparison of the occlusal vertical dimension after processing complete dentures made with lingualized balanced occlusion and conventional balanced occlusion

Statement of problem. An increase in occlusal vertical dimension (OVD) may occur after processing complete dentures. Although many factors that generate this change are known, no information is available in the dental literature regarding the effect that the occlusal scheme may have on the change in OVD.Purpose. This in vitro study compared the increase in OVD, after processing, between complete dentures with teeth arranged in lingualized balanced occlusion and conventional balanced occlusion.Material and methods. Thirty sets of complete dentures were evaluated as follows: 15 sets of complete dentures were arranged in conventional balanced occlusion (control) and 15 sets of complete dentures were arranged in lingualized balanced occlusion. All dentures were compression molded with a long polymerization cycle. The occlusal vertical dimension was measured with a micrometer (mm) before and after processing each set of dentures. Data were analyzed using an independent t test (alpha=.05).Results. The mean increase in the OVD, after processing, was 0.87 +/- 0.21 mm for the control group and 0.90 +/- 0.27 mm for the experimental group. There was no significant difference between the groups.Conclusion. After processing, dentures set in lingualized balanced occlusion showed an increase in OVD similar to those set in conventional balanced occlusion.

Evaluation of the occlusion vertical dimension of complete dentures after microwave disinfection

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Calcaneal Tendon Regions Exhibit Different MMP-2 Activation After Vertical Jumping and Treadmill Running

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Vertical migration of Haemonchus contortus third stage larvae on Brachiaria decumbens grass

The present study aimed at evaluating the vertical migration of Haemonchus contortus third stage larvae (1-3) on Brachiaria decumbens grass, as well as at verifying whether larval numbers on pasture varies over the day due to climatic conditions. Feces containing H. contortus L3 were deposited on the soil in the middle of herbage which was initially 30 cm high. Seven days later, samples of different herbage strata (0-10, 10-20 and >20 cm), remaining feces and a layer of approximately 1 cm soil were collected. Tests were carried out in four periods: September 2006, December 2006, March 2007, and June 2007. Samples were collected at sunrise, mid-day, sunset, and mid-night. The humidity and temperature conditions observed in different months influenced larval migration from the feces to the grass. In September, December and March, it rained after fecal deposition on pasture, which favored migration of larvae from the feces to the herbage. Conversely, in June 2007, when there was no rainfall after fecal deposition and temperatures were lower, L3 were mainly recovered from feces. As regards the vertical migration of larvae, the numbers of H. contortus L3 in the forage strata remained relatively constant over the day. This indicates there is not a determined period in which sheep on pasture are at higher risk of infection. Finally, in all collection periods a considerable amount of third stage larvae was observed on the herbage top, which is the first plant part consumed by sheep. (C) 2008 Elsevier B.V. All rights reserved.

Chave de identificação de espécies do estrato arbóreo da Mata Atlântica em Ubatuba (SP), com base em caracteres vegetativos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Espectro e distribuição vertical das estratégias de dispersão de diásporos do componente arbóreo em uma floresta estacional no sul do Brasil

A dispersão de diásporos é um evento de elevada importância para as espécies vegetais, que dispõem de diversas estratégias para este fim. O presente estudo teve por objetivos conhecer e caracterizar o espectro das diferentes estratégias de dispersão do componente arbóreo em uma floresta estacional de Santa Maria, Rio Grande do Sul, Brasil (próximo às coordenadas 53º54'W e 29º38'S) e, a partir desses dados, investigar sua relação com os estratos verticais da floresta. Foram amostrados todos os indivíduos com perímetro à altura do peito > 15 cm, em 100 unidades amostrais de 10×10 m. A caracterização das estratégias de dispersão foi realizada por meio de observações a campo de frutos e potenciais dispersores, e consulta à bibliografia especializada. Foram amostradas 58 espécies pertencentes a 26 famílias botânicas. Dessas espécies, 74% apresentaram estratégia de dispersão zoocórica; 24%, estratégia de dispersão anemocórica e apenas Gymnanthes concolor Spreng. apresentou a estratégia autocórica. Analisando-se a proporção das estratégias de dispersão por meio da densidade relativa, verificou-se que 80% dos indivíduos são zoocóricos, 12% anemocóricos e 8% autocóricos. Para a floresta analisada foram encontradas diferenças significativas nos padrões de distribuição vertical das espécies agrupadas de acordo com a estratégia de dispersão. A zoocoria ocorreu em espécies de todos os estratos, enquanto a autocoria ficou limitada ao sub-bosque. Já a anemocoria foi mais importante entre as espécies com indivíduos emergentes.

Composição florística e estrutura da comunidade arbórea na transição da Floresta Ombrófila Densa das Terras Baixas - Floresta Ombrófila Densa Submontana do Núcleo Picinguaba/PESM, Ubatuba, sudeste do Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Assessing the role of vertical leaves within the photosynthetic function of Styrax camporum under drought conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Manipulation of Rest Period Length Induces Different Causes of Fatigue in Vertical Jumping

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The rating of perceived exertion predicts intermittent vertical jump demand and performance

The aims of this study were (a) to assess the ability of the rating of perceived exertion (RPE) to predict performance (i.e. number of vertical jumps performed to a fixed jump height) of an intermittent vertical jump exercise, and (b) to determine the ability of RPE to describe the physiological demand of such exercise. Eight healthy men performed intermittent vertical jumps with rest periods of 4, 5, and 6s until fatigue. Heart rate and RPE were recorded every five jumps throughout the sessions. The number of vertical jumps performed was also recorded. Random coefficient growth curve analysis identified relationships between the number of vertical jumps and both RPE and heart rate for which there were similar slopes. In addition, there were no differences between individual slopes and the mean slope for either RPE or heart rate. Moreover, RPE and number of jumps were highly correlated throughout all sessions (r=0.97-0.99; P0.001), as were RPE and heart rate (r=0.93-0.97; P0.001). The findings suggest that RPE can both predict the performance of intermittent vertical jump exercise and describe the physiological demands of such exercise.

Evaluation of an Innovative Critical Power Model in Intermittent Vertical Jump

The aim of this study was to test if the critical power model can be used to determine the critical rest interval (CRI) between vertical jumps. Ten males performed intermittent countermovement jumps on a force platform with different resting periods (4.1 +/- 0.3 s, 5.0 +/- 0.4 s, 5.9 +/- 0.6 s). Jump trials were interrupted when participants could no longer maintain 95% of their maximal jump height. After interruption, number of jumps, total exercise duration and total external work were computed. Time to exhaustion (s) and total external work (J) were used to solve the equation Work = a + b . time. The CRI (corresponding to the shortest resting interval that allowed jump height to be maintained for a long time without fatigue) was determined dividing the average external work needed to jump at a fixed height (J) by b parameter (J/s). in the final session, participants jumped at their calculated CRI. A high coefficient of determination (0.995 +/- 0.007) and the CRI (7.5 +/- 1.6 s) were obtained. In addition, the longer the resting period, the greater the number of jumps (44 13, 71 28, 105 30, 169 53 jumps; p<0.0001), time to exhaustion (179 +/- 50, 351 +/- 120, 610 +/- 141, 1,282 +/- 417 s; p<0.0001) and total external work (28.0 +/- 8.3, 45.0 +/- 16.6, 67.6 +/- 17.8, 111.9 +/- 34.6 kJ; p<0.0001). Therefore, the critical power model may be an alternative approach to determine the CRI during intermittent vertical jumps.

Bromeliad architectural complexity and vertical distribution predict spider abundance and richness

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fresh-frozen human bone allograft in vertical ridge augmentation: clinical and tomographic evaluation of bone formation and resorption

The aim of the current study is to evaluate fresh-frozen human bone allografts (FHBAs) used in vertical ridge augmentation clinically and by computed tomography, and to analyze the resulting bone formation and graft resorption. Sixteen FHBAs were grafted in the maxillae and mandibles of 9 patients. The FHBAs, which were provided by the Musculoskeletal Tissue Bank of Marilia Hospital (Unioss), were frozen at -80A degrees C. After 7 months, dental implants were placed and bone parameters were evaluated. Vertical bone formation was measured by computerized tomography before (T0) and at 7 months (T1) after the surgical procedure. Bone graft resorption was measured clinically from a landmark screw head using a periodontal probe. The results were analyzed by Student's t-test. Significant differences existed in the bone formation values at T0 and T1, with an average change of 4.03 +/- A 1.69 mm. Bone graft resorption values were 1.0 +/- A 0.82 mm (20%). Implants were placed with varying insertion torque values (35-45 Ncm), and achieved primary stability. This study demonstrates that FHBAs promote satisfactory vertical bone formation with a low resorption rates, good density, and primary implant stability.