Comparação de métodos para determinar biomassa na região amazônica

The aboveground biomass content of a region can be estimated by either direct or indirect methods. Direct methods correspond to the biomass content determination with scales and extrapolation of results to larger areas. It is a destructive and very laborious procedure. Indirect methods utilize formulas whose entrance parameters are obtained from forest inventories. Forest inventories are made with the purpose to plan exploration and land use and the inventory data are frequently not suitable for biomass estimation. Problems with both methods increase in the Amazon region, where little information is available on forest biomass. The objective of this paper is to establish, by comparing the application of the indirect and direct methods in the determination of the biomass, the more appropriate indirect formulation to represent the characteristic vegetation of a region in the amazonian forest. A 0.2 hectare area was chosen, which was part of a major forest clearing experiment conducted in Tomé Açu, a town located 250 km south of Belém, the capital of the Brazilian state of Pará. The entire biomass in the area was weighted with scales during the three weeks that followed the cut of the forest in July 1994. A detailed inventory was carried out in the area and then the indirect method was applied in the data. Seven different formulas for determining biomass were used. Comparison of the data of real mass and the mass obtained through the application of the seven formulas indicated that the more suitable for the region is given by FW = α · φβ · Hγ, where FW is total fresh weight (kg), φ is the diameter at breast height (cm), H is the total height of the tree and α, β and γ are regression coefficients (equal to 0.026, 1.529 and 1.747, respectively).

A Simple maxwell Based Model in Order to Represent the frequency-dependent viscosity measured by ultrasound

A previous work showed that viscosity values measured high frequency by ultrasound agreed with the values at low frequency by the rotational viscometer when conditions are met, such as relatively low frequency viscosity. However, these conditions strongly reduce the range of the measurement cell. In order to obtain a measurement range and sensitivity high frequency must used, but it causes a frequency-dependent decrease on the viscosity values. This work introduces a new simple in order to represent this frequency-dependent behavior.model is based on the Maxwell model for viscoelastic , but using a variable parameter. This parameter has physical meaning because it represents the linear behavior the apparent elasticity measured along with the viscosity by .Automotive oils SAE 90 and SAE 250 at 22.5±0.5oC viscosities at low frequency of 0.6 and 6.7 Pa.s, respectively,tested in the range of 1-5 MHz. The model was used in to fit the obtained data using an algorithm of non-linear in Matlab. By including the viscosity at low frequency an unknown fitting parameter, it is possible to extrapolate its . Relative deviations between the values measured by the and extrapolated using the model for the SAE 90 and SAE 250 oils were 5.0% and 15.7%, respectively.©2008 IEEE.

Proposição e validações de equações para estimativa da erosividade de dois municípios do estado de São Paulo

The equations and extrapolation use to localities whose characteristics of soil and climate, even if partial, distinguish the town to which they were generated, still permeate in studies to estimate the rainfall erosivity (EI 30). This work has objective to propose and validate mathematical equations to estimate the rainfall erosivity of two cities of Sao Paulo State's. The adjusted to estimate obtaining and validate data of equations of erosivity (EI 30) according to values of coefficient of rain (Rc) were obtained from pluviographic and pluviometric rainfall data, respectively, using of distinct historical rainfall series. Mutiple comparisions test and confidence intervals were performed to compare absolute average of EI 30, pluviometric data (Pp), and Rc. The correlation between EI 30 and Rc was verified by of Pearson correlation coefficient. Test of the hypothesis of equality between population variance was used to compare the equations. Pluviometrics data of historical series rainfall data different than those that the models were generated were used to validate and to assess the performance of the equations, proposed of this study and compare them with another equation already consolidated in literature. The results show that for the conditions under which the study was conducted, the simple linear equations, shown to be the most appropriate to estimate the rainfall erosivity these two cities. According to the test of the hypothesis of equality variances between populations, the equations adjusted for each city differ statistically so that the rainfall erosivity of each city must be estimated by their respective equation.

Técnicas de correlação no delineamento de feições rodoviárias em imagens de baixa e média resolução

This paper presents a method for the sequential road feature delineation from digital images. It is based on a feedback loop between extrapolation and refinement steps of a given road centerline point, using in both steps correlation techniques. Firstly, a previously extracted road centerline point is linearly extrapolated, resulting in an approximate position. Secondly, this approximate position is corrected by comparing gray level profiles extracted perpendicularly to the extrapolation direction. This strategy is then repeated to allow the entire road centerline to be extracted or a stop point to be found. In order to initialize the extraction process, the operator needs to supply a starting point plus direction and width. Experimental results obtained from the application of the method to real image data are presented and discussed in this paper.

Geometric modeling from the medical images in the CAD system to support prosthesis design

This paper presents an individual designing prosthesis for surgical use and proposes a methodology for such design through mathematical extrapolation of data from digital images obtained via tomography of individual patient's bones. Individually tailored prosthesis designed to fit particular patient requirements as accurately as possible should result in more successful reconstruction, enable better planning before surgery and consequently fewer complications during surgery. Fast and accurate design and manufacture of personalized prosthesis for surgical use in bone replacement or reconstruction is potentially feasible through the application and integration of several different existing technologies, which are each at different stages of maturity. Initial case study experiments have been undertaken to validate the research concepts by making dimensional comparisons between a bone and a virtual model produced using the proposed methodology and a future research directions are discussed.

Numerical assessment of mass conservation on a MAC-type method for viscoelastic free surface flows

A numerical study of mass conservation of MAC-type methods is presented, for viscoelastic free-surface flows. We use an implicit formulation which allows for greater time steps, and therefore time marching schemes for advecting the free surface marker particles have to be accurate in order to preserve the good mass conservation properties of this methodology. We then present an improvement by using a Runge-Kutta scheme coupled with a local linear extrapolation on the free surface. A thorough study of the viscoelastic impacting drop problem, for both Oldroyd-B and XPP fluid models, is presented, investigating the influence of timestep, grid spacing and other model parameters to the overall mass conservation of the method. Furthermore, an unsteady fountain flow is also simulated to illustrate the low mass conservation error obtained.

Expressão do gene FOXE1 em culturas de osteossarcoma canino

Pós-graduação em Medicina Veterinária - FMVZ

Um método previsor-corretor primal-dual de pontos interiores barreira logarítmica modificada, com estratégias de convergência global e de ajuste cúbico, para problemas de programação não-linear e não-convexa

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito do exercício físico de intensidade moderada sobre fatores de risco cardiovascular e marcadores inflamatórios de mulheres obesas no período pós-menpausa

Pós-graduação em Fisioterapia - FCT

Ablação de esmalte e dentina bovinos e humanos com laser de Ti:safira no regime de femtossegundos: análises morfológicas e fisico-químicas comparativas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos da maturação biológica sobre o custo energético, potência aeróbia, máximo déficit acumulado de oxigênio e performances de nadadores

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Confinement effects and why carbon nanotube bundles can work as gas sensors

Carbon nanotubes have been at the forefront of nanotechnology, leading not only to a better understanding of the basic properties of charge transport in one dimensional materials, but also to the perspective of a variety of possible applications, including highly sensitive sensors. Practical issues, however, have led to the use of bundles of nanotubes in devices, instead of isolated single nanotubes. From a theoretical perspective, the understanding of charge transport in such bundles, and how it is affected by the adsorption of molecules, has been very limited, one of the reasons being the sheer size of the calculations. A frequent option has been the extrapolation of knowledge gained from single tubes to the properties of bundles. In the present work we show that such procedure is not correct, and that there are qualitative differences in the effects caused by molecules on the charge transport in bundles versus isolated nanotubes. Using a combination of density functional theory and recursive Green's function techniques we show that the adsorption of molecules randomly distributed onto the walls of carbon nanotube bundles leads to changes in the charge density and consequently to significant alterations in the conductance even in pristine tubes. We show that this effect is driven by confinement which is not present in isolated nanotubes. Furthermore, a low concentration of dopants randomly adsorbed along a two-hundred nm long bundle drives a change in the transport regime; from ballistic to diffusive, which can account for the high sensitivity to different molecules.

Different approaches on seed germination to look into global warming effects on Araucaria angustifolia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sistema de cálculo computacional da unidade monitora para feixes de elétrons em radioterapia

In radiation theraphy with electron beam, the electrons are produced in linear accelerators, and energy the most used have between 4MeV and 20MeV. Generally, the treatments are done for superficial injuries, because the low penetration of these particles. In this work a system for calculation of monitor units (U.M.) for cases of treatments with electron beam was developed. The Excel program of Microsoft was used and is easily found in the operational system of the personal microcomputers. In the Excel has been inserted the pertinent data of the linear accelerator of Varian, model 2100C, used in the Service of radiation theraphy of the Hospital of the Clinics of the College of Medicine of the UNESP of Botucatu. For some values of the physical parameters, such as: factors field and factors calibration, not supplied in the tests of acceptance of the machine, still proceeded calculations from interpolation and extrapolation. The mathematical formulas for automatic search of these and others factors used in the calculations of the determination of the U.M had been developed in agreement available routines in Excel. For this the functions had been used the function IF (that it imposes search condition) and the PROCH (that looks a value in a column from determined line), beyond the basic functions of addition, multiplication and division. It is intended to optimize the routine of the Services of radiation theraphy that perform through eletrontheraphy procedures, speeding the calculations and minimizing the occurrence of errors and uncertainties deriving of the maken a mistake manipulation of the parameters gotten in tables of data of electron beams

Contribuição das águas subterrâneas para a vazão do Ribeirão Boa Vista ou Córrego do Lajeado

This paper aimed to give a contribution to improve water resources management, consists of the analysis of interaction among groundwater and streamflow, by through the analysis of the relationship between basic and total streamflow, based on measured hidrological data from Ribeirão Boa Vista or Córrego Lajeado. watershed. Comparisons among groundwaterflow in this basin with another one in Rio Corumbataí basin were made based on the specific basic flow, in order to verify the possibility of the utilization of measured hydrological data in other basins with similar geological characteristics and soil use and occupation. Based upon the comparisons that were made, specific basic flow does not represent a good tool for extrapolation of measured data, indicating that this comparison shall be weighted by others characteristics as permeability and thickness of geological formations. Finally, it was possible to conclude that basic flow may be considered as an additional parameter for analysis of hydrological and hydrogeological characteristics of a basin and to provide subsidies to release legal licenses for water resources uses. related to surface water as well as for groundwater and may also be used as a tool for consolidation of integrated management of water resources, that is considered as a necessary and essential practice to avoid conflicts between users of water resources in a river basin.