Horizontal distribution of megalopae of Brachyura (Crustacea, Decapoda) in a South American tropical estuary

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relief influence on the spatial distribution of the Atlantic Forest cover on the Ibiúna Plateau, SP

Several studies suggest that, on a large scale, relief conditions influence the Atlantic Forest cover. The aim of this work was to explore these relationships on a local scale, in Caucaia do Alto, on the Ibiúna Plateau. Within an area of about 78 km2, the distribution of forest cover, divided into two successional stages, was associated with relief attribute data (slope, slope orientation and altitude). The mapping of the vegetation was based on the interpretation of stereoscopic pairs of aerial photographs, from April 2000, on a scale of 1:10,000, while the relief attributes were obtained by geoprocessing from digitalized topographic maps on a scale of 1:10,000. Statistical analyses, based on qui-square tests, revealed that there was a more extensive forest cover, irrespective of the successional stage, in steeper areas (>10 degrees) located at higher altitudes (>923 m), but no influence of the slope orientation. There was no sign of direct influence of relief on the forest cover through environmental gradients that might have contributed to the forest regeneration. Likewise, there was no evidence that these results could have been influenced by the distance from roads or urban areas or with respect to permanent preservation areas. Relief seems to influence the forest cover indirectly, since agricultural land use is preferably made in flatter and lower areas. These results suggest a general distribution pattern of the forest remnants, independent of the scale of study, on which relief indirectly has a strong influence, since it determines human occupation.

Efferent projections of the suprachiasmatic nucleus based on the distribution of vasoactive intestinal peptide (VIP) and arginine vasopressin (AVP) immunoreactive fibers in the hypothalamus of Sapajus apella

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Flutuação populacional e distribuição vertical de Brevicoryne brassicae (L.) (Hemiptera: Aphididae) em couve

O conhecimento da dinâmica populacional e da distribuição vertical de insetos pragas em plantas hospedeiras é fundamental para o desenvolvimento de programas de manejo integrado de pragas. No presente trabalho efetuou-se um levantamento populacional de formas ápteras do pulgão Brevicoryne brassicae (L.), visando determinar a época de maior densidade populacional e a distribuição vertical em plantas de couve, (Brassica oleracea L. var. acephala DC.), cultivadas em Jaboticabal, SP. O estudo foi realizado durante as safras de brássicas de 1998 e 1999, efetuando-se correção da acidez do solo por meio de aplicação de calcário apenas no campo utilizado em 1998. A amostragem dos pulgões foi feita visualmente em folhas classificadas em três categorias: apical, mediana e basal. Nas duas safras estudadas, a infestação de B. brassicae na couve atingiu a maior densidade populacional em setembro, diminuindo rapidamente a seguir. Nos dois campos não se observou a mesma distribuição de B. brassicae em folhas apicais, medianas e basais. Os fatores que podem ter contribuído para as diferenças observadas no padrão de distribuição do pulgão devem estar relacionados com a precipitação pluvial e o calcário magnesiano.

Nota científica: padrão de distribuição de alguns bicos hidráulicos

O conhecimento sobre o padrão de deposição de bicos pulverizados é essencial para uma boa seleção e posicionamento dos mesmos em um equipamento pulverizador. O presente trabalho foi conduzido com o objetivo de se conhecer os padrões de deposição de alguns bicos pulverizadores disponíveis no mercado brasileiro. Dois ou três exemplares de cada tipo de bico foram testados em uma mesa de prova, constituída de uma chapa inclinada corrugada, construída segundo as especificações da Organização Mundial da Saúde para testes de bicos pulverizadores. Todos os bicos foram testados à pressão de 276 kN/m2 (40 libras/p ol2), com exceção dos bicos de impacto (Polijet) que foram testado s à pressão de 97 kN/m2 (14 libras/ pol 2). Ressalvando-se o pequeno número de exemplares testados por cada tipo, os resultados indicaram que: a) - existem diferenças entre a vazão estipulada pelos fabricantes e a vazão real, sendo esta diferença, acentuada para alguns casos; b) - foram observadas diferenças apreciáveis nos padrões de deposição entre as repetições nos bicos Polijet azul e Polijet vermelho (ICI) e no bico JD 14 -2 (Jacto) ; c) - os bicos 80 02 e 11003 (Spraying Systems), 80-03 e X3 (Hatsuta), JD 14-1 (Jacto) e Albuz verde (Albuz) apresentaram padrão de deposição uniforme entre as repetições; d) - considerando as variações observadas recomendam-se cuidadosos testes dos bicos, principalmente naqueles empregados nos trabalhos de experimentação, para possibilitar a escolha de um lote uniforme, para melhor controle da distribuição e dosagem dos produtos pulverizados.

Distribución volumétrica, simetría del chorro y diámetro de gotas de las boquillas TF-VS2

El conocimiento de las características de las diferentes boquillas de pulverización tiene una importancia imprescindible para la adecuada y correcta recomendación de su uso. El objetivo de este trabajo fue determinar el espaciamiento máximo en la barra horizontal de pulverización, la simetría del chorro y el diámetro de gotas en boquillas de pulverización TF-VS2. El trabajo fue realizado en mesa de deposición, en donde fueron utilizadas las presiones de 100, 200 y 300 kPa en las alturas de trabajo de 40 y 50 cm. La simetría del chorro fue determinada en función de dos metodologías (empírica y trigonométrica). También se determinó el tamaño de las gotas, utilizando el método de difracción de rayos laser, en función de dos caldos de pulverización constituidos por agua y por agua con adyuvante en las tres presiones de trabajo ya descritas. Los espaciamientos máximos entre las boquillas en la barra de pulverización no pueden rebasar los 70 y 82 cm, admitiéndose el CV de un 10% para las alturas de 40 y de 50 cm respectivamente. La mayor presión proporcionó el menor diámetro mediano volumétrico (DMV) y la peor uniformidad de gotas, además del mayor porcentaje de gotas susceptibles a deriva, así como también aumentó la simetría entre los chorros.

Spatial relationships between soil attributes and corn yield in no-tillage system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Perfis de distribuição volumétrica de pontas XR 11003 e TXVK-4 em diferentes condições de pulverização

Com o objetivo de avaliar a uniformidade da distribuição volumétrica e o efeito da angulação dos bicos na barra em pulverizações, foi conduzido experimento em laboratório, com dez unidades de cada uma das pontas de jato plano XR 11003 e de jato cônico vazio TXVK-4, fabricadas pela Spraying Systems Co. As pontas XR 11003 foram avaliadas, isoladamente, em mesa de prova para bicos construída conforme a Norma ISO 5682-1:1996, a 0,30; 0,40 e 0,50 m de altura, submetidas à pressão de 200 e 300 kPa e posicionadas com ângulos de 30º e 45º no sentido horário e anti-horário e na vertical; as pontas TXVK-4 foram avaliadas nas mesmas alturas, porém a 300 e 400 kPa, e somente na vertical. A distribuição média do volume coletado em cada configuração, das dez unidades de cada ponta, foi inserida num programa computacional, desenvolvido para o estudo, que permitiu a simulação do padrão de deposição de uma barra pulverizadora, com 24 bicos, com sobreposições variáveis, obtendo-se, ao final, o coeficiente de variação da sobreposição, o desvio- padrão e a média do volume aplicado. Os resultados sugerem a necessidade de ajustes no espaçamento entre bicos para a obtenção de melhor uniformidade na distribuição, principalmente quando se utiliza ângulo na barra; há menor influência da variação da altura da barra sobre a uniformidade da distribuição quando o espaçamento entre bicos é reduzido.

Seasonality of macroalgal communities in a subtropical drainage basin in Paraná state, southern Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aberrant crypt foci and colon cancer: comparison between a short- and medium-term bioassay for colon carcinogenesis using dimethylhydrazine in Wistar rats

Aberrant crypt foci (ACF) in the colon of carcinogen-treated rodents are considered to be the earliest hallmark of colon carcinogenesis. In the present study the relationship between a short-term (4 weeks) and medium-term (30 weeks) assay was assessed in a model of colon carcinogenesis induced by dimethylhydrazine (DMH) in the rat. Six-week-old male Wistar rats were given subcutaneous injections of DMH (40 mg/kg) twice a week for 2 weeks and killed at the end of the 4th or 30th week. ACF were scored for number, distribution pattern along the colon and crypt multiplicity in 0.1% methylene-blue whole-mount preparations. ACF were distinguished from normal crypts by their larger size and elliptical shape. The incidence, distribution and morphology of colon tumors were recorded. The majority of ACF were present in the middle and distal colon of DMH-treated rats and their number increased with time. By the 4th week, 91.5% ACF were composed of one or two crypts and 8.5% had three or more crypts, while by the 30th week 46.9% ACF had three or more crypts. Thus, a progression of ACF consisting of multiple crypts was observed from the 4th to the 30th week. Nine well-differentiated adenocarcinomas were found in 10 rats by the 30th week. Seven tumors were located in the distal colon and two in the middle colon. No tumor was found in the proximal colon. The present data indicate that induction of ACF by DMH in the short-term (4 weeks) assay was correlated with development of well-differentiated adenocarcinomas in the medium-term (30 weeks) assay.

Origin of sensory and autonomic innervation of the rat temporomandibular joint: A retrograde axonal tracing study with the fluorescent dye fast blue

Previous studies that have used retrograde axonal tracers (horseradish peroxidase alone or conjugated with wheat germ agglutinin) have shown that the temporomandibular joint (TMJ) is supplied with nerve fibers originating mainly from the trigeminal ganglion, in addition to other sensory and sympathetic ganglia. The existence of nerve fibers in the TMJ originating from the trigeminal mesencephalic nucleus is unclear, and the possible innervation by parasympathetic nerve fibers has not been determined. In the present work, the retrograde axonal tracer, fast blue, was used to elucidate these questions and re-evaluated the literature data. The tracer was deposited in the supradiscal articular space of the rat TMJ, and an extensive morphometric analysis was performed of the labeled perikaryal profiles located in sensory and autonomic ganglia. This methodology permitted us to observe labeled small perikaryal profiles in the trigeminal ganglion, clustered mainly in the posterior-lateral region of the dorsal, medial and ventral thirds of horizontal sections, with some located in the anterior-lateral region of the ventral third. Sensory perikarya were also labeled in the dorsal root ganglia from C2 to C5. No labeled perikaryal profiles were found in the trigeminal mesencephalic nucleus. on the other hand, autonomic labeled perikaryal profiles were distributed in the sympathetic superior cervical and stellate ganglia, and parasympathetic otic ganglion. Our results confirmed those of previous studies and also demonstrated that: (i) there is a distribution pattern of labeled perikaryal profiles in the trigeminal ganglion; (ii) some perikaryal profiles located in the otic ganglion were labeled; and (iii) the trigeminal mesencephalic nucleus did not show any retrogradely labeled perikaryal profiles.

Stress Analysis in Platform-Switching Implants: A 3-Dimensional Finite Element Study

The aim of this study was to evaluate the influence of the platform-switching technique on stress distribution in implant, abutment, and pen-implant tissues, through a 3-dimensional finite element study. Three 3-dimensional mandibular models were fabricated using the Solid Works 2006 and InVesalius software. Each model was composed of a bone block with one implant 10 mm long and of different diameters (3.75 and 5.00 mm). The UCLA abutments also ranged in diameter from 5.00 mm to 4.1 mm. After obtaining the geometries, the models were transferred to the software FEMAP 10.0 for pre- and postprocessing of finite elements to generate the mesh, loading, and boundary conditions. A total load of 200 N was applied in axial (0 degrees), oblique (45 degrees), and lateral (90) directions. The models were solved by the software NeiNastran 9.0 and transferred to the software FEMAP 10.0 to obtain the results that were visualized through von Mises and maximum principal stress maps. Model A (implants with 3.75 mm/abutment with 4.1 mm) exhibited the highest area of stress concentration with all loadings (axial, oblique, and lateral) for the implant and the abutment. All models presented the stress areas at the abutment level and at the implant/abutment interface. Models B (implant with 5.0 mm/abutment with 5.0 mm) and C (implant with 5.0 mm/abutment with 4.1 mm) presented minor areas of stress concentration and similar distribution pattern. For the cortical bone, low stress concentration was observed in the pen-implant region for models B and C in comparison to model A. The trabecular bone exhibited low stress that was well distributed in models B and C. Model A presented the highest stress concentration. Model B exhibited better stress distribution. There was no significant difference between the large-diameter implants (models B and C).

Effect of chlorhexidine on bond strength of two-step etch-and-rinse adhesive systems to dentin of primary and permanent teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

In vivo uptake of a haem analogue Zn protoporphyrin IX by the human malaria parasite P. falciparum-infected red blood cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

New occurrence of microchromosomes B in Moenkhausia sanctaefilomenae (Pisces, Characidae) from the Parana River of Brazil: analysis of the synaptonemal complex

The Moenkhausia sanctaefilomenae specimens showed a karyotype consisting of 2n = 50 chromosomes with 12 metacentrics, 36 submetacentrics and two subtelocentrics. In addition to the basic karyotype, all the males specimens have cells ranging from zero to two B microchromosomes in mitotic metaphases. These chromosomes were not observed in the female specimens. C-band analysis showed a distribution pattern of characteristic heterochromatin with interstitial and centromeric blocks. However, the B chromosomes were faintly stained with C-banding and were not fluorescent with CMA(3) staining. The meiotic studies showed the formation of bivalents in metaphase I and in pachytene under an optical microscope. Through synaptonemal complex analysis with an electron microscope, the pachytene showed 25 bivalents completely paired and a small bivalent corresponding to the B chromosomes. In the same preparation, one of the B chromosomes was observed in a univalent form. on the basis of pairing behavior and morphology it is assumed that B chromosomes of M. sanctaefilomenae show homology between them and their evolutionary aspects are discussed.