Photoelectrochemical properties of FTO/m-BiVO4 electrode in different electrolytes solutions under visible light irradiation

Photoelectrochemical properties of FTO/BiVO4 electrode were investigated in different electrolytic solutions, potassium chloride (KCl) and sodium sulphate (Na2SO4), and under visible light irradiation condition. In order to accomplish that, an FTO/BiVO4 electrode was built by combining the solution combustion synthesis technique with the dip-coating deposition process. The morphology and structure of the BiVO4 electrode were investigated through X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy. Photoelectrochemical properties were analyzed through chronoamperometry measurements. Results have shown that the FTO/BiVO4 electrode presents higher electroactivity in the electrolyte Na2SO4, leading to better current stabilization, response time, and photoinduced current density, when compared to KCl electrolyte. Besides, this electrode shows excellent performance for methylene blue degradation under visible light irradiation condition. In Na2SO4, the electrode has shown higher degradation rate, 51 %, in contrast to 44 % in KCl, plus higher rate constant, 174 × 10-4 min-1 compared to 150 × 10-4 min-1 in KCl. Results presented in this communication leads to the indication of BiVO4 thin films as alternate materials to use in heterogeneous photoelectrocatalysis, more specifically in decontamination of surface water. © 2013 Springer-Verlag Berlin Heidelberg.

Prevenção da contaminação cruzada em odontologia por meio de terapia fotodinâmica (TFD) utilizando LED azul e curcumina

Pós-graduação em Odontologia - FOAR

Biomodificação radicular em dentes expostos e não expostos à placa bacteriana

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo do comportamento térmico do inseticida HCH com perspectivas para aplicação em descontaminação térmica de solos

Pós-graduação em Química - IBILCE

Avaliação da ação bactericida e bacteriostática das nanopartículas TiO2 e Ag aplicadas em pinos intraradiculares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sustainable worm control practices in South America

A high prevalence of nematodes, especially Haemonchus contortus and Trichostrongylus colubriformis, that exhibit multiple anthelmintics resistance has been reported in sheep in several South American countries. For this reason, the development of strategies that are less dependent on anthelmintic treatments is imperative for the prophylaxis of gastrointestinal nematode infections in small ruminants. Integrated grazing using cattle and sheep can be used for pasture decontamination with considerable reduction of H. contortus and T. colubnformis infective larvae after cattle grazing. Several breeds of sheep exhibit genetically related resistance against nematode infections, as is the case of crioulo, native or naturalised breeds of sheep. These breeds descend from livestock introduced by Portuguese and Spanish settlers and have been submitted to a long process of natural selection in various environmental conditions. In the South, the Crioula Lanada breed is more resistant to H. contortus than are Corriedale sheep. In tropical areas, where the minimum temperatures are usually higher than 20 degrees C, hair sheep flourish, especially the Santa Ines breed, which also display a higher level of resistance to nematode infections compared with certain breeds of European origin. However, Santa Ines sheep have inferior carcass quality compared with other commercial breeds. Recent studies showed that the crossbreeding of Santa Ines ewes with sires of breeds with high potential for growth and meat production, results in crossbred animals with high productivity and a satisfactory degree of resistance against nematode infections. Several studies have indicated that improvement in nutrition has a beneficial effect on the development of resistance in lambs that were naturally or artificially infected with nematodes. Therefore, supplementary feeding and breeding strategies to improve resistance to nematodes are feasible options in the effort to reduce dependence on anthelmintic drugs to control worm infections in sheep. (C) 2013 Elsevier B.V. All rights reserved.

Production lot sizing and scheduling with non-triangular sequence-dependent setup times

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uso da ampicilina sódica e cloranfenicol no controle de contaminantes na micropropagação de bananeira 'Thap maeo'

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Trimming and washing poultry carcass to reduce microbial contamination: A comparative study

The objective of this study was to compare the efficiency of washing and trimming broiler carcasses to reduce bacterial contamination. At the poste-visceration site, 100 broiler carcasses were collected during 4 visits to a slaughterhouse in Santa Catarina State, Brazil. Birds were from the same flock, age, and approximately 2.4 kg of weight. Groups were as follows: group 1, with fecal contamination; group 2, without fecal contamination; group 3, with fecal contamination and trimmed; group 4, with fecal contamination and washed; group 5, with fecal contamination, and washed and trimmed. Carcass washings were performed with at least 1.5 L/bird of potable water (0.5 to 1 mg/kg of residual chlorine) at room temperature (20-25 degrees C) using spray cabinets with 44 spray nozzles distributed into 2 chambers (pressure of 2 kgf/cm(2) and 4 kgf/cm(2)). Washed carcasses (trimmed or not) showed significantly (P < 0.05) lower counts of aerobic mesophiles (plate count agar) on the third evaluation, and even lower (P < 0.01) counts for total coliforms (CT) and fecal coliforms (Escherichia coli). Trimmed carcasses showed significantly lower counts (P < 0.05) for plate count agar; however, we observed higher counts for E. coli (P < 0.05). The association of both treatments (washing and trimming) showed significantly higher (P < 0.05) counts for coliforms (CT and E. coli). We can conclude that the washing method is overall more efficient than the trimming method to decontaminate chicken carcasses at the postevisceration site. Hopefully, our findings can help poultry companies to minimize production costs by applying the washing method for carcass decontamination.

Photocatalytic decomposition of rhodamine-B using scandium and silver-modified TiO2 Powders

Semiconductor-mediated photocatalytic oxidation is an interesting method for water decontamination and a specially modified TiO2 is said to be a promising material. This study verified that the synthesis of 1wt%Ag modified-Sc0.01Ti0.99O1.995 powder samples prepared by Polymeric Precursor Method is capable of forming a mixture of anatase-rutile phase with high photocatalytic performance. This kind of material is found to have a lower bandgap compared to the TiO2-anatase commercial powders, which can be associated to an innovative hybrid modification. The simultaneous insertion of scandium in order to generate a p-type semiconductor and a metallic silver nanophase acting as an electron trapper demonstrated being capable of enhancing the degradation of rhodamine B compared to the commercial TiO2. In spite of the different thermal treatments or phase amounts, the hybrid modified powder samples showed higher photocatalytic activity than the commercial ones.

Caracterização química e estudo térmico de lodos provenientes da estação de tratamento de esgotos de Ribeirão Preto, SP, Brasil

Pós-graduação em Química - IQ

Instrumentation of dental implants: a literature review

The aim of this study was to review the literature on the systems used to decontaminate the implant's surface. Different instruments have been proposed, but there is no agreement in the literature about which methods would be more efficient with no damage to the implant surface. It was reported the use of plastic, carbon fiber, stainless-steel and titanium curettes and also the use of other systems such as ultrasonic points with different tips, rubber cups and air abrasion. Literature review: In most of the studies, the injury caused on the titanium surface at the time of instrumentation was examined. In others, the cell adhesion on the titanium dental implants following instrumentation of the implant surface was observed. Moreover, to enhance cleaning around implants, ultrasonic systems were recently tested. Conclusion: Metal instruments can lead to major damage to implant surface, therefore, they are not indicated for decontamination of dental implants surfaces. Furthermore, non-metallic instruments, such as plastic curettes, rubber cups, air abrasion and some ultrasonic systems seem to be better choices to remove calculus and plaque of the sub- and supra-gingival peri-implant area. It is noteworthy that more studies evaluating the effects of these systems are required to establish best practices to be used in the treatment of patients with dental implants.

Descontaminação do resíduo industrial de couro, uma proposta para o desenvolvimento sustentável nos curtumes

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Multilayer adsorption of Cu(II) and Cd(II) over Brazilian Orchid Tree (Pata-de-vaca) and its adsorptive properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Inactivation of candida albicans by cold atmospheric pressure plasma jet

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)