Otimização da distância de extração de madeira com forwarder

The activities and management operations of wood harvesting do not have good computational tools available to help the forest technicians with the task of cost reduction. In many cases, machines of high investment are used in wood harvesting without adequate operation planning; consequently, the cost per hour of these machines, which is high, could be reduced. Using technological resources such as the Geographic Information Systems (GIS) integrated with the Global Positioning System (GPS), which are the basis of precision harvesting. In this research, a technological tool capable of calculating and optimizing the average skidding distance of the forwarder was developed. It was used in stands of different sizes and formats through mathematical techniques and available functionalities in the Geographic Information System GRASS. The developed tool, called optimized model, divides the stand in small parts in relation to shorter skidding distances. The main variable considered was the alignment of plantation. The model was tested in eucalypt stands located in the State of São Paulo. Sixteen stands were randomly selected: eight with a rectangular polygon form, and eight with irregular polygon form. The main variables were collected in these stands. Results showed that the optimized model developed, is efficient and flexible. It was possible to divide the stands in small parts resulting in smaller skidding medium distances. The stands with irregular form had shorter skidding medium distances than the rectangular stands.

Video target tracking by using competitive neural networks

A target tracking algorithm able to identify the position and to pursuit moving targets in video digital sequences is proposed in this paper. The proposed approach aims to track moving targets inside the vision field of a digital camera. The position and trajectory of the target are identified by using a neural network presenting competitive learning technique. The winning neuron is trained to approximate to the target and, then, pursuit it. A digital camera provides a sequence of images and the algorithm process those frames in real time tracking the moving target. The algorithm is performed both with black and white and multi-colored images to simulate real world situations. Results show the effectiveness of the proposed algorithm, since the neurons tracked the moving targets even if there is no pre-processing image analysis. Single and multiple moving targets are followed in real time.

A regularized nonlinear diffusion approach for texture image denoising

In this paper a new partial differential equation based method is presented with a view to denoising images having textures. The proposed model combines a nonlinear anisotropic diffusion filter with recent harmonic analysis techniques. A wave atom shrinkage allied to detection by gradient technique is used to guide the diffusion process so as to smooth and maintain essential image characteristics. Two forcing terms are used to maintain and improve edges, boundaries and oscillatory features of an image having irregular details and texture. Experimental results show the performance of our model for texture preserving denoising when compared to recent methods in literature. © 2009 IEEE.

Synchronizing Brazilian Sign Language (LIBRAS) on videos for Open Digital TV with educational purposes

The TV is a potential midia of communication that affects all social classes and it is available in 98% of Brazilian homes. It has been used as a distributor of educational materials since the 1950s. By 2016 the Open Digital TV (ODTV) in Brazil might cover the entire national territory, replacing the TV with analog signals. Concerns about accessibility for People with Special Needs (PSN) in that media have become more intense since the 1990s worldwide. In Brazil, it is estimated 24.6 million of PSN, 23% of them having some type of hearing loss. Of these, 2.9% are reported as deafs. Brazilian Sign Language (LIBRAS) is considered the first literacy language for deaf people in Brazil. In this context, this paper presents a proposal to facilitate the generation of educational content for ODTV based on two components. One is called SynchrLIBRAS and allows subtitles synchronization in Portuguese and a LIBRAS translator window of videos downloaded from the Web. The second component allows the visualization of this content through the Brazilian System of Digital TV and IPTV - environments that implement the middleware Ginga-NCL. The main focus of this paper is the presentation of the first component: SynchrLIBRAS. This proposal has educational purposes, contributing to teach LIBRAS to people who may collaborate with social inclusion of the deaf people.

Hardware implementation of type-2 programmable fuzzifier

The design of full programmable type-2 membership function circuit is presented in this paper. This circuit is used to implement the fuzzifier block of Type-2 Fuzzy Logic Controller chip. In this paper the type-2 fuzzy set was obtained by blurring the width of the type-1 fuzzy set. This circuit allows programming the height and the shape of the membership function. It operates in current mode, with supply voltage of 3.3V. The simulation results of interval type-2 membership function circuit have been done in CMOS 0.35μm technology using Mentor Graphics software. © 2011 IEEE.

Design of a labVIEW system applied to predictive maintenance

The implementation of vibration analysis techniques based on virtual instrumentation has spread increasingly in the academic and industrial branch, since the use of any software for this type of analysis brings good results at low cost. Among the existing software for programming and creation of virtual instruments, the LabVIEW was chosen for this project. This software has good interface with the method of graphical programming. In this project, it was developed a system of rotating machine condition monitoring. This monitoring system is applied in a test stand, simulating large scale applications, such as in hydroelectric, nuclear and oil exploration companies. It was initially used a test stand, where an instrumentation for data acquisition was inserted, composed of accelerometers and inductive proximity sensors. The data collection system was structured on the basis of an NI 6008 A/D converter of National Instruments. An electronic circuit command was developed through the A/D converter for a remote firing of the test stand. The equipment monitoring is performed through the data collected from the sensors. The vibration signals collected by accelerometers are processed in the time domain and frequency. Also, proximity probes were used for the axis orbit evaluation and an inductive sensor for the rotation and trigger measurement. © (2013) Trans Tech Publications, Switzerland.

A obra artística e as novas mídias de representação: do papel ao digital

Pós-graduação em Artes - IA

Implementação de um gerador tridimensional de malhas de elementos finitos, com aplicações à simulação computacional em odontologia

Pós-graduação em Matemática - IBILCE

Visualisation and reconstruction in dentistry

Visualisation in the field of dentistry has nor, thus far, reached the same development as other medical fields. Potential applications of visualisation techniques in this area, however, are many, ranging from educational displays to training for delicate procedures. This paper reports on the investigation of techniques for handling three-dimensional models of teeth, aiming at investigation of dental structures. An algorithm was implemented for this purpose, which reconstructs three-dimensional teeth models from two-dimensional contour slices. Results employing various data sets are presented, including the output of VRML models for exploration.

Análise por computação gráfica das alterações produzidas em próteses totais superiores imersas diretamente em água e pela termociclagem

Objectives: This study aimed to assess dimensional changes in acrylic resin base and artificial teeth position after water storage and thermocycling using computer graphics measurements. Methods: Twenty-four waxed replicas were obtained from a previous upper complete denture. For linear measurements, points in cusps tips of left central incisor and second premolars and molars were marked in one of the prostheses with graphite and transferred to the others using an acrylic resin guide. The prostheses were scanned after waxing, polymerization and treatments and the images were exported to “AutoCad 2002 Today®” software for measurements. Results: There was no statistically significant difference in changes of each segment for each group and between the phases evaluated after polymerization and thermocycling. In groups I and III, the values after polymerization are higher than those after treatment, which suggests shrinkage while the prostheses in group II have expanded. Conclusion: The three groups exhibited artificial teeth movement after tests in comparison to the polymerized prosthesis. The prostheses submitted to water storage in kiln at 36ºC during seven days showed different behavior than the other groups.

Computação gráfica: ferramenta didática de comunicação, design e produção

This paper aims to show some advantages brought by the computer graphics and inter-disciplinary communication within the academic institution UNESPBauru, using it as a teaching tool in undergraduate engineering and design. The communication in the classroom could be reconfigured through the adoption of new technologies by drawing a parallel between old and new programmatic contents, setting goals and parameters to improve communication between teacher and student, transferring and sediment of the given content and increasing production in quantity and complexity of work undertaken by students. As an example of computer graphics use, this work presents a final graduation work that was successful in the market, "Teardrop Trailer Caracol", as result of the final adoption of CAD technology as a teaching tool, design and production.

Matemática e arte: incursões na interdisciplinaridade

The complex analysis is, in actuality, a fundamental mathematical object, given its applicability to various areas of science. This paper proposes a more interesting intertwining of mathematical content to the Visual Arts, through computer graphics. The presentation of aesthetic standards, using the “domain coloring” for viewing a complex function, shows that algebraic and geometric properties can be “colored” which makes its study more human, contextualized, pleasant and dynamic, leading to greater ability to understand, to absorb and to create concepts. This work shows the contribution to the interdisciplinarity to study of mathematics.

ARSTUDIO: estúdio virtual para produção de conteúdos audiovisuais em realidade aumentada para a TV Digital

“Virtual Studio” is a system developed for the creation of virtual sets, as well as any threedimensional virtual objects that can be digitally integrated to the scenes captured on a real television studio. Through techniques such as chroma-key, computer graphics , augmented reality and virtual reality is possible flexibility in producing content for digital TV, reduce cost and meet 12.485/2011 law, the Brazilian “Law of Pay TV”, which has among its objectives “to increase the production and circulation of diverse and quality Brazilian audiovisual content, generating jobs, income, royalties, professionalism and strengthening of national culture” (ANCINE , Brazilian Nacional Cinema Agency ). Based on this background, an overview of the benefits of using the technologies mentioned for the production of content for digital television is presented. This work involves the development of a system of Interactive Virtual Studio called ARSTUDIO per team of researchers from the Posgraduate Program in Digital Television: Information and Knowledge at UNESP, São Paulo State University in Bauru, State of São Paulo, Brazil.

ARSTUDIO: estúdio virtual para produção de conteúdos audiovisuais em realidade aumentada para TV digital

Virtual Studio is a system developed for the creation of virtual sets , as well as any three-dimensional virtual objects that can be digitally integrated to the scenes captured on a real television studio . Through techniques such as chroma-key , computer graphics , augmented reality and virtual reality is possible flexibility in producing content for digital TV , reduce cost and meet 12.485/2011 law , the Brazilian Law of Pay TV , which has among its objectives to increase the production and circulation of diverse and quality Brazilian audiovisual content, generating jobs, income , royalties, professionalism and strengthening of national culture (ANCINE , Brazilian Nacional Cinema Agency ). Based on this background , an overview of the benefits of using the technologies mentioned for the production of content for digital television is presented . This work involves the development of a system of Interactive Virtual Studio called ARSTUDIO per team of researchers from the Posgraduate Program in Digital Television: Information and Knowledge at UNESP , São Paulo State University in Bauru , State of São Paulo, Brazil .

As contribuições do uso de infográficos, Storytelling e Mapas Mentais em vídeo na Educação a Distância: exemplo de aplicação na plataforma Já Entendi ENEM

Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC