Relações entre produção de biogás em aterro sanitário e variações no potencial elétrico natural

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo para a implementação de um sistema de desbaste de cobre para manufatura de placas de circuito impresso

This paper presents a study on the development of a manufacturing system of printed circuit boards through copper milling. An advantage of this system is the replacement of chemical processes by physical process presenting a sustainable solution. The paper uses programs that will generate G-code needed to establish the coordinates where the milling forms the tracks. After obtaining the code, it will be transformed into steps that will be sent through the serial port to the microcontroller and the serial communication control will be in software. After obtaining information the microcontroller will execute the movement of the stepper motors through their drivers, H-bridge, the microcontroller also drives the spindle motor responsible for rotating the grinding tool, using a driver with a optocoupler and TRIAC

Tratamento da superfície do alumínio via eletrólise a plasma

This paper presents the study on the application of the electrolytic plasma for surface treatment of aluminum. A bibliographical study on the material of interest was preliminarily performed and later designed and built an electrolytic cell, including the excitation source. Unlike conventional electrolysis process, the plasma assisted carry on in the non-linear region of characteristic current/voltage curve. Therefore it requires for the on set of the process that the power supply operates on harder conditions than those on high current process. The plasma produced during the present investigation has temperatures in the range o 6,0.10 3 -7,0 .10 3 K, well above those found in conventional chemical process. It also shows a particular dynamic to promote changes on surface and to produce new materials. The plasma is generated by microdischarge in vapor or gas bubbles involved in physic-chemical processes in electrode regions of the electrolytic cell. The electrode material was the aluminum (7075). The Process Electrolytic Plasma Processing (EPP) is sensitive to various parameters such as operating voltage, current density, electrolyte, concentration of electrolyte, geometry of reactor, temperature of electrolytic solution and dynamic of the fluid in the cell. The experiments were carried on in order to find parameters for a stable abd steady operation. The choice for the electrolytic was silicate/alkali solution in various concentrations to operate in various voltage as well. Plasma was produced on negative (cathode) and positive (anode) electrode, in specific conditions. A stable operation on the cathode process was obtained with low concentration of the electrolytic in aqueous solution, current density around 250V effective voltage. For the evolution of plasma in anodic process it was required higher concentrations and higher... (Complete abstract click electronic access below)

Caracterização de plasmas a partir do monômero digime através da espectrometria de massa: deposição polimérica

Pós-graduação em Engenharia Mecânica - FEG

Biocompatibilidade da terapia fotodinâmica: estudo in vitro e in vivo

Pós-graduação em Ciência Odontólogica - FOA

Tomografia da ionosfera a partir do GNSS e técnicas algébricas: estudo de caso para a região brasileira

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Multistep taphonomic alterations in fluvial mollusk shells: a case study in the touro passo formation (pleistocene–holocene), Southern Brazil

Accurate paleoenvironmental reconstruction relies on the correct interpretation of the postmortem history of skeletal remains in shelly assemblages. In contrast to marine settings, actualistic taphonomic studies are lacking for shell-rich concentrations in freshwater riverine systems. In particular, the taphonomic pathways and the origins of taphonomic signatures that are recorded in bioclasts from fluvial settings are poorly known. In this study, we addressed this issue by comparing the taphonomic signatures and shell-damage profiles among shells of freshwater mollusks recorded both in death and in fossil assemblages from the same fluvial environment. Our data indicated that dissolution was the most pervasive taphonomic process leading to the destruction of the shells. The loss of taphonomic information extended beyond shell dissolution in the riverbed, or the early diagenesis in the sedimentary record. The loss of biological information from the living community through the death assemblage, until the incorporation of shells as fossils, mainly occurred during the time the shells were in the sediment-water interface. Though this destruction affected primarily dead shells, reworked fossils also became vulnerable because they were carried out into the river load again by channel avulsion. A model that included the main taphonomic pathways followed by the molluscan shells in the fluvial Touro Passo Formation (Pleistocene-Holocene) is discussed. In this model, two main destructive domains were recognized, which were the biological, physical, and chemical processes operating at the taphonomically active zone (= TAZ domain) and the pedogenetic domain.

Produção do monóxido de titânio em estrelas variáveis

Mira are pulsating variable stars in advanced stages of evolution. Their atmospheres are sources of intense absorption bands attributed to molecular titanium monoxide (TiO). It has been suggested that the abundance of TiO reaches its maximum value near the minimum light. In this sense, the study of the processes of formation and destruction of TiO in circumstellar envelopes of Mira stars, not only allows us to understand the physical and chemical processes that occur in these environments, as it allows to verify the correlation between the abundance of TiO and its light curve. However, the main mechanisms of formation and destruction of TiO are poorly known and, consequently, the possible correlation between the abundance of this species and the light curve. In these sense, we studied the main processes of formation and destruction of titanium monoxide in molecular layers of Mira atmospheres and determined its temporal variation as function of the stellar radius. The TiO profile along the radius was expected for the different stellar phase, however its abundance is not enough to explain the light curve. The reasons behind it are discussed in details

Pré-hidrólise ácida de bagaço de cana-de-açúcar e sua caracterização físico-química

The biomass resulting from processing sugarcane bagasse has been considered a source of cellulose with the potential production of bio-fuels. This lignocellulose can be processed into ethanol since is hydrolyzed by chemical processes (acids) or biotechnology (enzymes) which generate sugars suit for fermentation. This study had the objective to utilize physical and chemical pre-treatment processes for prehydrolysis of sugarcane bagasse. The experimental treatment was adjusted at a factor of 4 X 2, by the combination of pre-hydrolysis timing (15, 30, 45 and 60 minutes) and sulfuric acid concentrations (7.0% and 9.0%) which was incubated at a temperature of 121° C in an autoclave. The treatment data was subjected to analysis of the variance and averages which were compared using the Tukey test with a probability of 5%. The results obtained showed that through pretreatment acid applied on the lignocellulose material, there was a significant break from the substrate fibers like cellulose, hemicellulose and lignin.

Obtenção e caracterização de nanocelulose a partir de fibras de Chorisia speciosa St. Hil

Natural fibers have been highlighted as a renewable material that can replace materials from oil and its derivatives. In this context, Brazil becomes the perfect setting because of the diversity of fibers found in its territory, such as sugarcane, sisal, rice, cotton, coconut, pineapple, among others. The paineiras (Chorisia speciosa St. Hil) are typically Brazilian trees, which produce paina as fruit. These fruits are still little studied as a source of lignocellulose by research groups. This project aimed obtaining and characterization of cellulose nanofibers from the fibers from the paina fibers. Obtaining nanocellulose is practically made through simplified chemical processes. First, was performed out pre-treatments to removal of waxes, lignin and hemicellulose. The first stage of pre-treatment was carried out by alkaline aqueous solution of sodium hydroxide (NaOH) at 5wt%, where the fibers were under constant agitation for 1h at 70°C. Through alkali treatment it was possible to remove most of the lignin, hemicellulose, waxes and extractives. After the alkaline treatment was done bleaching with an aqueous solution of sodium hydroxide (NaOH) to 4wt% and hydrogen peroxide (H2O2) to 24wt% 1:1 during 2h with constant stirring to 50 °C. Through bleaching was possibe to remove residual lignin, and got cellulose with 72% of crystallinity. Nanocellulose of paina fibers was extracted using different conditions of acid hydrolysis with sulfuric acid (H2SO4) to 50wt%. After acid hydrolysis, the suspensions were centrifuged during 30 min and dialyzed in water to remove excess acid until neutral pH (6-7). Then the suspensions were passed by ultrasonification in an ultrasound 20 kHz during 1h in an ice bath. Untreated, alkalinized and bleached fibers as well as cellulose nanoparticles were characterized by the techniques of thermogravimetry ... (Complete abastract click electronic access below)

Response of minimally processed carambola to chemical treatments and low-oxygen atmospheres

Fresh-cut carambola (Averrhoa carambola L.) has limited marketability due to cut-surface browning. The effect of chemical treatments (ascorbic acid, citric acid and Ca-EDTA), controlled atmosphere (0.4-20.3% O-2) and the association of these processes was investigated. Post-cutting dip and low-oxygen atmospheres did not prevent discoloration or improve sensory and physicochemical parameters. However, ascorbic acid (0.5% and 1%) dips reduced polyphenol oxidase (PPO) activity during storage at 4.5 degrees C, with 1% ascorbic acid inducing the lowest activity. Although cut-surface browning of 'Maha' slices was not relevant, carambola slices treated with 1% ascorbic acid in association with 0.4% oxygen did not present significant browning or loss of visual quality for up to 12 days, 3 days longer than low oxygen alone (0.4% O-2), thus, their quality can be significantly improved by combining both treatments. (c) 2007 Elsevier B.V. All rights reserved.

Supercritical fluid extraction from Lippia alba: global yields, kinetic data, and extract chemical composition

In this work, experimental data for the system Lippia alba + CO2 is presented. The major constituents of the L. alba volatile oil are limonene and carvone. Thus, literature data for the systems limonene + CO2 and carvone + CO2, and the Peng-Robinson equation of state (PR-EOS) were used to select the operating temperature and pressure, which maximize the global yield in L. alba extract. Global yields were determined at 80, 100, and 120 bar and 40, 45, and 50 degrees C. L. alba extracts were also obtained by conventional processes (hydrodistillation, low-pressure ethanol extraction and Soxhlet ethanol). The chemical compositions of the extracts were determined by gas and thin layer chromatography (TLC). The secretor structures of L. alba were observed by scanning electron microscopy (SEM) before and after supercritical extraction. The largest yield (similar to 7%, mass of extract/mass of dry solid) of the CO2-extract was obtained at 318 K and 100 bar. The chemical compositions of the CO2-extracts were different from those of the extracts obtained by Soxhlet and low-pressure solvent extraction (LPSE) because of the co-extraction of heavy substances by ethanol. The operating conditions that maximized the carvone and limomene yields were 80 bar and 323 K (80 mass%) and 120 bar and 323 K (17 mass%), respectively. (c) 2004 Elsevier B.V All rights reserved.

Study of the carbon dioxide chemical fixation-activation by guanidines

Fixation of CO2 is one of the most important priorities of the scientific community dedicated to reduce global warming. In this work, we propose new methods for the fixation of CO2 using the guanidine bases tetramethylguanidine (TMG) and 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]-pyrimidine (TBD). In order to understand the reactions occurring during the CO2 fixation and release processes, we employed several experimental methods, including solution and solid-state NMR, FTIR, and coupled TGA-FTIR. Quantum mechanical NMR calculations were also carried out. Based on the results obtained, we concluded that CO2 fixation with both TMG and TBD guanidines is a kinetically reversible process, and the corresponding fixation products have proved to be useful as transcarboxylating compounds. Afterward, CO2 thermal releasing from this fixation product with TBD was found to be an interesting process for CO2 capture and isolation purposes. (C) 2008 Elsevier Ltd. All rights reserved.

Disturbance chemical cues determine changes in spatial occupation by the convict cichlid Archocentrus nigrofasciatus

I studied the effect of disturbance chemical cues on fish that make trade-offs between foraging in an open area and remaining in a safe refuge. I used convict cichlids Archocentrus nigrofasciatus that were either visually exposed to a predator (n = 8) or exposed to water conditioned by chemical cues from disturbed conspecifics (n = 8). Fish visually exposed to a predator decreased their ingestion rate and spent more time in the refuge than in the foraging area, while fish receiving water from frightened conspecifics did not alter their ingestion rate or time spent in the refuge and foraging site, but increased their spatial occupation (i.e., motion). These results suggest that convict cichlids recognized the predator by visual cues. Moreover, disturbance cues are a form of threatening public information that may increase fish spatial occupation due to increased exploring behaviour; but is not sufficiently alarming to alter feeding or increase refuge use. (C) 2004 Elsevier B.V. All rights reserved.

Action of the chemical agent fipronil (active ingredient of acaricide Frontline (R)) on the liver of mice: An ultrastructural analysis

Fipronil, active ingredient of the acaricide Frontiline (R), is a phenyl-pyrazolic derivative, and its efficacy in the elimination of several plagues, even in low concentrations, has already been demonstrated; however, its effect on nontarget organisms has not been thoroughly explained. In this sense, the objective of this study was to evaluate the effects of different dosages of fipronil on the liver of mice in artificial conditions. Results showed that the animals exposed to fipronil present significant ultrastrucutural changes in hepatic cells with evident cellular and cytoplasm disorganization in hepatocytes characterized by an increase in the number of organelles, mainly mitochondria and rough endoplasmic reticulum, organelles that, in the case of the exposed animals, were probably responsible for the enzymes' synthesis that have the function of inactivating the toxic metabolites. A fat accumulation in the hepatocytes' cytoplasm (steatosis) was observed, in addition to extended vacuolated areas, mainly in regions next to the cell nucleus. Alterations observed in the nuclei of the hepatocytes pointed out cell death processes. Moreover, Kupffer cells increased in number (hyperplasia) suggesting an increase in the phagocytic activity of the liver in the exposed animals. Microsc. Res. Tech., 2011. (c) 2011 Wiley Periodicals, Inc.