Influence of polymerization on the synthesis of SrTiO3: Part I. Characteristics of the polymeric precursors and their thermal decomposition

The influence of polymerization on the thermal decomposition of polymeric precursors and phase formation was investigated during synthesis of SrTiO3. The precipitation of polymeric precursor in acetone produced a more thermal stable precursor with lower weight loss during decomposition. This more stable precursor retarded the formation of the SrTiO3 phase. From thermal analysis, XRD and FT-IR the presence of an intermediate phase during decomposition of the precursors was observed. This is a mixed (Sr,Ti) carbonate phase with the proposed composition of Sr2Ti2O5.CO3. © 1995.

Characteristics of the histamine release from hamster cheek pouch mast cells stimulated by lectins from Brazilian beans and concanavalin A

We have characterized the histamine releasing effects of lectins extracted from Brazilian beans, in comparison to concanavalin A, in hamster cheek pouch cell suspensions containing mast cells. The lectins from Dioclea virgata, Canavalia brasiliensis, and Dioclea rostrata induce histamine release in a similar manner to concanavalin A, but appear to differ in potency and efficacy. The effects depended on the temperature, pH, and metabolic energy, demonstrating the non-cytotoxic nature of the histamine release. It is suggested that the lectins studied act by the same mechanism as concanavalin A (interacting with sugars in the antibodies bound to the mast cells), since high concentrations of glucose inhibit the histamine release. The lectins at high concentrations quench the histamine release. This suppression is reversed by increasing calcium concentration, suggesting that the lectins bind to the calcium that is essential for the secretion, thereby confirming and extending our previous data using the lectin from Dioclea virgata in rat peritoneal mast cells.

Structural characteristics of the superior venae cavae wall at the intrapericardium segment in adults and aging individuals

The authors admit that the conjunctive-muscular constitution of the walls of the superior venae cavae throughout the length of the intrapericardium segment and the debouchement in the right atrium, associated with the presence of a myocardium sheath can be made up of a functional device of sphincter form able to act on the control of the blood flow to the interior of the arterial chamber as well as stopping blood flow during the arterial systole. The fixation of the venous wall to the deep chamber of the serous pericardium, contributes to growth in resistance during the elevation of venous pressure, making possible the preservation of integrity of the superior venae cavae. The expansion of fasciculi of nodal fibers in the right wall of the superior venae cavae permits that the unlocked impulse in the S-A node also reaches the vascular wall contributing to the shortening and diminution in caliber of the vein.

Influence of viscoelastic characteristics of the colloidal suspensions on the formation of SnO2 supported membranes

SnO2 supported membranes have been prepared by sol-casting on alumina tubular substrate, using aqueous colloidal suspensions prepared by sol-gel route. The viscoelastic behaviour during sol ageing was analyzed by dinamic rheologial measurements. The complex viscosity and the storage and loss moduli have been followed during the sol-gel transition and the results have been correlated with the linear aggregates growth and the scalar percolation models. The scanning electron microscopy has evidenced that the homogeneity and thickness of the membrane depend on the sol ageing time. Crack-free and homogeneous membranes have been obtained for coated layers of 0.5μm thickness. © 1997 Trans Tech Publications.

Influence of silver additions on the aging characteristics of the Cu-10.4at.%Al alloy

The influence of additions of 1.3, 2.5, 3.8, 5.1, and 6.3 at.% Ag on the aging behavior of the Cu-10.4at.%Al alloy was studied using microhardness measurements, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis. The results indicated that with silver additions it is possible to obtain a response to age hardening, and that for large aging times there is a decrease in the alloy hardness, with a process that leads to Ag and Al segregation. © 1998 Elsevier Science S.A.

Breeding biology and nest site characteristics of the scarlet ibis in southeastern Brazil

The breeding biology of the only Scarlet Ibis Eudocimus ruber colony in southeastern Brazil was studied during the 1996-97 breeding season. The ibises began to visit their colony site by mid-September. Nest building and egg laying took place in early November and was synchronous, making the first nesting pulse. Mean clutch size in this pulse was 2.45 eggs/nest, and 0.67 young/nest reached age three weeks, when they were able to walk about the nest tree and environs. Predation was the main cause of nest failures (74% of all losses), followed by nest collapses (19%). A second nesting pulse, also synchronous, started in late December, when the young from the first nests were already able to wander about the colony and make short flights. Mean clutch size of this pulse was 2.05 eggs/nest and productivity was 0.34 young/nest. Nest collapses during storms accounted for 58% of the losses, and predation for a further 27%. A third pulse, with only a few nests, started when the second pulse young were in their third week, but no nest was successful. The incubation time was 21-24 days, and the young were able to fly well when 40 days old, deserting the colony by age 75 days. Nesting early in the breeding season yielded greater success. Nests were built close to each other (a sphere with a 1.8 m radius and centered on an average nest would include the four nearest neighbors) and there was always more than one nest per tree. Most nests were built on the upper third of the nest-tree and had some cover from overhanging branches. There was a trend for the ibises building their nests in even closer proximity during the second pulse, perhaps as a strategy to lessen individual predation risks. Received 30 August 2000, accepted 4 October 2000.

Characteristics of the double-torsion test to determine the R-curve of ceramic materials

Double-torsion tests were carried out on a commercial ceramic floor tile to verify whether this test is suitable for determining the R-curve of ceramics. The instantaneous crack length was obtained by means of compliance calibration, and it was found that the experimental compliance underestimates the real crack length. The load vs. displacement curves were also found to drop after maximum loading, causing the stress intensity factor to decline. The R-curves were calculated by two methods: linear elastic fracture mechanics and the energetic method. It was obtained that the average values of crack resistance, R, and the double of the work of fracture, 2 · γwof, did not depend on notch length, a0, which is a highly relevant finding, indicating that these parameters were less dependent on the test specimen's geometry. The proposal was to use small notches, which produce long stable crack propagation paths that in turn are particularly important in the case of coarse microstructures.

Evaluation of semen characteristics of the species Mazama americana in captivity

In recent years the concept of genomic resource banks has grown as a way of maintaining the genetic variability of populations, while the quality of cryopreservation of the gametes determines the effectiveness of such banks. However, the absence of basic knowledge regarding the physiology of species and their semen characteristics hampers the establishment of reproductive biotechnologies. Thus, this paper aimed to determine certain physicochemical (volume, colour, appearance, pH and osmolarity) and microscopic characteristics (mass movement, motility, vigour, concentration, and sperm morphology and morphometry) of semen of the species Mazama americana. To achieve this, five males of the species were used, and three semen samples per buck (electroejaculation) were collected at intervals of 2 weeks. The volume, pH and osmolarity of the ejaculate were 0.39 ± 0.14 mL, 6.90 ± 0.74 and 297.74 ± 19.10 mOsm/kg, respectively, while the values obtained for mass movement, motility, vigour and concentration were 3.33 ± 0.82; 69.6 ± 8.92%; 3.53 ± 0.50, and 244.07 ± 98.65 × 107/mL, respectively. Regarding the colour of the ejaculate, five samples were classified as ivory, two as yellowish, two as whitish and six as white. Regarding appearance, seven samples were considered creamy and eight, milky. Morphology was analysed in a humid chamber under phase contrast microscopy and 73.50 ± 5.57% of cells presented normal morphology, 8.37 ± 3.15% presented major defects and 18.13 ± 6.46% presented minor defects. To determine sperm morphometry, an optical microscope (Leica DM 5000B) and the Leica Qwin image analyser program were used, resulting in 8.09 ± 0.40, 4.65 ± 0.30, 2.81 ± 0.44 and 30.25 ± 3.02 m for length, largest width, smallest width and area, respectively. Copyright © CSIRO 2013.

Ultrastructural characteristics of the spermatogenesis during the four phases of the annual reproductive cycle of the black myotis bat, Myotis nigricans (Chiroptera: Vespertilionidae)

Myotis nigricans is an endemic species of vespertilionid bat, from the Neotropical region, that resembles temperate zone bats in their reproductive cycle; presenting an annual reproductive cycle with two periods of testicular regression, which are not linked to the apoptotic process and seems to be not directly linked to any seasonal abiotic variation. Thus, this study aimed to ultrastructurally evaluate their reproductive cycle. The process of testicular regression could be divided into four periods: active; regressing; regressed and recrudescence; with all presenting distinct characteristics. The active period was similar to that of other bats, presenting the complete occurrence of spermatogenesis, with three main types of spermatogonia (Ad, Ap, and B) and 12 steps in spermatid differentiation; however, it differed in having the outer dense fibers 1, 5, 6, and 9 larger than the others. These three types of spermatogonia undergo considerable morphologic changes from regressing to the regressed period, and in the recrudescence, they return to the basic morphology, which reactivates spermatogenesis. In conclusion, our study described the process of spermatogenesis, the ultrastructure of the spermatozoa and the distinct morphologic variations in the ultrastructure of the testicular cells of M. nigricans during the four different periods of its annual reproductive cycle. Microsc. Res. Tech., 76:1035-1049, 2013. © 2013 Wiley Periodicals, Inc.

Morphological characteristics of the Pterodoras granulosus digestive tube (Valenciennes, 1821) (Osteichthyes, Doradidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of Egg Rearing Temperature and Storage Time on the Biological Characteristics of the Predatory Stink Bug Podisus nigrispinus (Hemiptera: Pentatomidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Characteristics of the acquisition of sonorant consonants orthography in Brazilian children from a São Paulo municipality

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)