Qualidade pós-colheita de abacates "hass" mantidos em temperatura ambiente e tratados com diferentes radiações

This study aimed the avocado ‘Hass’ conservation with the use of radiation. We performed two experiments: Experiment I – fruits irradiated with different doses of cobalt-60 gamma irradiation(0,0; 0,2; 0,4; 0,6 e 1,0 kGy); Experiment II – fruit irradiated by electron accelerator in different doses (0,0; 0,48; 0,8; 1,12 e 1,45 MeV), both maintained at room temperature of 21±1 °C and at relative humidity of 79±5 %. Antioxidant capacity, total phenolic compounds, fresh weight loss, and respiration rate evaluation were performed every three days for 12 days. The experimental design was completely randomized with three replicates per treatment. For statistical analysis, the Tukey test at 5% probability was employed. Under the conditions in which the experiments were performed, the results showed that the gamma radiation use retained the fruits for 12 days, regardless the doses applied. The radiation by electron accelerator use also promote the fruits preservation, regardless the doses employed.

Características pós-colheita em frutos de pitaya orgânica submetida a diferentes doses de irradiação

The objective was to evaluate the influence of different irradiation doses in post-harvest characteristics of pitaya organic species Hylocereus undatus grown in the municipality of Itajobi - SP. The experiment was conducted at the Fruit and Vegetable Department of Agribusiness Management and Technology - FCA / UNESP - Botucatu - SP from December 2008 to January 2009. The radiation process was conducted at the Institute for Energy and Nuclear Research (IPEN) located in Sao Paulo. The design was randomized blocks with six treatments and three replications. The fruits were harvested on the third day after onset of color, selected, cleaned, packed in polystyrene trays covered with PVC film, pre - cooled (8 ° C for 24 hours) and subjected to different doses of gamma irradiation (0.0; 0.2, 0.4, 0.6, 0.8 and 1.0 kGy of cobalt-60) and subsequently stored in cold temperature of 8 degrees C, with relative humidity of about 85 ± 5%. The fruits were evaluated at twenty days after irradiation for pH, soluble solids (SS), Titratable Acidity (TA), ratio (SS / TA) and percentage loss of mass (weight). Data were subjected to analysis of variance and means compared by Tukey test at 5% probability. There were no statistically significant differences (p <0.05) for pH (4.82), soluble solids (11.33) Titratable acidity (0.12) and ratio (79.42) compared to non-irradiated fruit. Regarding the percentage of loss of mass (weight), the highest among the patients treated irradiated with 0.8 kGy (12.12%), whereas for treatment at a dose of 0.0 kGy (irradiated) showed a lower loss weight (11.59%), a result that differs significantly (P <0.05) from the remaining doses of irradiation. The loss of mass (weight) of fruit irradiated with other doses was not statistically significant (P> 0.05).

Molecular architecture and electrical properties in evaporated films of cobalt phthalocyanine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Airborne-Particle Abrasion and Mechanico-Thermal Cycling on the Flexural Strength of Glass Ceramic Fused to Gold or Cobalt-Chromium Alloy

Purpose: To evaluate the effect of airborne-particle abrasion and mechanico-thermal cycling on the flexural strength of a ceramic fused to cobalt-chromium alloy or gold alloy.Materials and Methods: Metallic bars (n = 120) were made (25 mm x 3 mm x 0.5 mm): 60 with gold alloy and 60 with Co-Cr. At the central area of the bars (8 mm x 3 mm), a layer of opaque ceramic and then two layers of glass ceramic (Vita VM13, Vita Zahnfabrick) were fired onto it (thickness: 1 mm). Ten specimens from each alloy group were randomly allocated to a surface treatment [(tungsten bur or air-particle abrasion (APA) with Al(2)O(3) at 10 mm or 20 mm away)] and mechanico-thermal cycling (no cycling or mechanically loaded 20,000 cycles; 10 N distilled water at 37 degrees C and then thermocycled 3000 cycles; 5 degrees C to 55 degrees C, dwell time 30 seconds) combination. Those specimens that did not undergo mechanico-thermal cyclingwere stored inwater (37 degrees C) for 24 hours. Bond strength was measured using a three-point bend test, according to ISO 9693. After the flexural strength test, failure types were noted. The data were analyzed using three factor-ANOVA and Tukey's test (alpha = 0.05).Results: There were no significant differences between the flexural bond strength of gold and Co-Cr groups (42.64 +/- 8.25 and 43.39 +/- 10.89 MPa, respectively). APA 10 and 20 mm away surface treatment (45.86 +/- 9.31 and 46.38 +/- 8.89 MPa, respectively) had similar mean flexural strength values, and both had significantly higher bond strength than tungsten bur treatment (36.81 +/- 7.60 MPa). Mechanico-thermal cycling decreased the mean flexural strength values significantly for all six alloy-surface treatment combinations tested when compared to the control groups. The failure type was adhesive in the metal/ceramic interface for specimens surface treated only with the tungsten bur, and mixed for specimens surface treated with APA 10 and 20 mm.Conclusions: Considering the levels adopted in this study, the alloy did not affect the bond strength; APA with Al(2)O(3) at 10 and 20 mm improved the flexural bond strength between ceramics and alloys used, and the mechanico-thermal cycling of metal-ceramic specimens resulted in a decrease of bond strength.

Opaque Layer Firing Temperature and Aging Effect on the Flexural Strength of Ceramic Fused to Cobalt-Chromium Alloy

Purpose: To evaluate the effect of the opaque layer firing temperature and mechanical and thermal cycling on the flexural strength of a ceramic fused to commercial cobalt-chromium alloy (Co-Cr). The hypotheses were that higher opaque layer temperatures increase the metal/ceramic bond strength and that aging reduces the bond strength.Materials and Methods: Metallic frameworks (25 x 3 x 0.5 mm(3); ISO 9693) (N = 60) were cast in Co-Cr and airborne-particle abraded (Al(2)O(3): 150 mu m) at the central area of the frameworks (8 x 3 mm(2)) and divided into three groups (N = 20), according to the opaque layer firing temperature: Gr1 (control)-900 degrees C; Gr2-950 degrees C; Gr3-1000 degrees C. The opaque ceramic (Opaque, Vita Zahnfabrick, Bad Sackingen, Germany) was applied, and the glass ceramic (Vita Omega 900, Vita Zahnfabrick) was fired onto it (thickness: 1 mm). While half the specimens from each group were randomly tested without aging (water storage: 37 degrees C/24 hours), the other half were mechanically loaded (20,000 cycles; 50 N load; distilled water at 37 degrees C) and thermocycled (3000 cycles; 5 degrees C to 55 degrees C, dwell time: 30 seconds). After the flexural strength test, failure types were noted. The data were analyzed using 2-way ANOVA and Tukey's test (alpha = 0.05).Results: Gr2 (19.41 +/- 5.5 N) and Gr3 (20.6 +/- 5 N) presented higher values than Gr1 (13.3 +/- 1.6 N) (p = 0.001). Mechanical and thermal cycling did not significantly influence the mean flexural strength values (p > 0.05). Increasing the opaque layer firing temperature improved the flexural bond strength values (p < 0.05). The hypotheses were partially accepted.Conclusion: Increasing of the opaque layer firing temperature improved the flexural bond strength between ceramic fused to Co-Cr alloy.

MECHANISM OF ACTION OF COBALT IONS ON RAT OSSEOUS PLATE ALKALINE-PHOSPHATASE

Polidocanol-solubilized osseous plate alkaline phosphatase was modulated by cobalt ions in a similar way as by magnesium ions. For concentrations up to 1 mu M, the Chelex-treated enzyme was stimulated by cobalt ions, showing K-d = 6.0 mu M, V = 977.5 U/mg, and site-site interactions (n = 2.5). Cobalt-enzyme was highly unstable at 37 degrees C, following a biphasic inactivation process with inactivation constants of about 0.0625 and 0.0015 min(-1). Cobalt ions stimulated the enzyme synergistically in the presence of magnesium ions (K-d = 5.0 mu M; V = 883.0 U/mg) or in the presence of zinc ions (K-d = 75.0 mu M; V = 1102 U/mg). A steady-state kinetic model for the modulation of enzyme activity by cobalt ions is proposed.

Determination of cobalt marker in cow ruminal fluid by EDXRF and SRTXRF

This article describes a comparison of conventional energy-dispersive X-ray fluorescence (EDXRF) and synchrotron radiation total-reflection X-ray fluorescence (SRTXRF) for Co determination in ruminal fluid from Holstein cow. This element is used as marker for animal nutrition studies. For EDXRF, 200 mu l of the sample were dried on 6.35 mu m Mylar filmat 60 degrees C. The excitation was carried out using an X-ray tube with Mo target and Zr filter operated at 30 kV/ 20 mA. For SRTXRF, 10 mu l of the samplewere pipetted on a Lucite carrier and dried at 60 degrees C. In both the techniques, Ga was used as internal standard and the acquisition time was 200 s. The trueness of both techniques was evaluated through the standard addition method, the recoveries obtained by SRTXRF and EDXRF were 76 and 99%, and the limits of detection, 13 and 240 mu g l(-1), respectively. Copyright (C) 2011 John Wiley & Sons, Ltd.

Retention strength of cobalt-chromium vs nickel-chromium titanium vs Cp titanium in a cast framework association of removable partial overdenture

Aim: There is little information considering the framework association between cast clasps and attachments. The aim of this study was to evaluate the retention strength of frameworks match circumferential clasps and extra resilient attachment cast in three different alloys (cobalt-chromium, nickel-chromium titanium and commercially pure titanium), using two undercut (0.25 and 0.75 mm) and considering different period of time (0, 1/2, 1, 2, 3, 4 and 5 years). Methods: Using two metallic matrices, representing a partially edentulous mandibular right hemiarch with the first molar crown, canine root and without premolars, 60 frameworks were fabricated. Three groups (n = 20) of each metal were cast and each group was divided into two subgroups (n = 10), corresponding the molar undercut of 0.25 mm and 0.75 mm. The nylon male was positioned at the matrix and attached to the acrylic resin of the prosthetic base. The samples were subjected to an insertion and removal test under artificial saliva environment. Results: The data were analyzed and compared with ANOVAs and Tukey's test at 95% of probability. The groups cast in cobaltchromium and nickel-chromium-titanium had the highest mean retention strength (5.58 N and 6.36 N respectively) without significant difference between them, but statistically different from the group cast in commercially pure titanium, which had the lowest mean retention strength in all the periods (3.46 N). The association frameworks using nickel-chromium-titanium and cobalt-chromium could be used with 0.25 mm and 0.75 mm of undercut, but the titanium samples seems to decrease the retention strength, mainly in the 0.75 mm undercut. The circumferential clasps cast in commercially pure titanium used in 0.75 mm undercuts have a potential risk of fractures, especially after the 2nd year of use. Conclusion: This in vitro study showed that the framework association between cast clasp and an extra resilient attachment are suitable to the three metals evaluated, but strongly suggest extra care with commercially pure titanium in undercut of 0.75 mm. Clinical significance: Frameworks fabricated in Cp Ti tend to decrease in retentive strength over time and have a potential risk of fracture in less than 0.75 mm of undercut.

Estimativa de parâmetros genéticos da habilidade de permanência aos 48, 60 e 72 meses de idade em vacas da raça Caracu

Objetivou-se estimar a herdabilidade da característica habilidade de permanência (HP) em um rebanho de bovinos da raça Caracu visando sua utilização como critério de seleção. A característica em estudo foi definida como a probabilidade de a vaca estar presente no rebanho aos 48 (HP48), aos 60 (HP60) e aos 72 (HP72) meses, desde que possuíssem registros de pelo menos duas lactações nas específicas idades. Observações binárias, com zero (0 = fracasso) e um (1 = sucesso) foram designadas aos animais. Para análise da HP, foram utilizados dados de 5.487, 4.947 e 4.308 animais aos 48, 60 e 72 meses, respectivamente. Os componentes de variância e as herdabilidades foram estimados mediante inferência Bayesiana, via amostragem de Gibbs, pelo programa MTGSAM - threshold, utilizando-se um modelo touro. Foram utilizadas como variáveis explanatórias grupo de contemporâneos, classe de produção de leite na primeira lactação, classe de idade ao primeiro parto e sua interação. As análises forneceram estimativas médias de herdabilidade iguais a 0,28 ± 0,07 para HP48, 0,27 ± 0,07 para HP60 e 0,23 ± 0,07 para HP72. Os resultados evidenciaram que a característica HP apresentou variação aditiva em todas as idades estudadas e, portanto, pode ser empregada como critério de seleção para longevidade produtiva.

Desenvolvimento do Trato Gastrointestinal de Embriões Oriundos de Matrizes Pesadas de 30 e 60 Semanas de Idade

O objetivo deste trabalho foi investigar o efeito da idade das matrizes pesadas sobre o desenvolvimento do trato gastrointestinal (TGI) dos embriões no terço final do período de incubação, bem como a utilização das reservas do saco vitelino nas 24 h pós-eclosão, em pintos alimentados ou em jejum. Foram utilizados ovos férteis da linhagem Cobb 500, oriundos de matrizes pesadas com 30 e 60 semanas de idade. O desenvolvimento do TGI (proventrículo+moela, segmentos do intestino delgado e saco vitelino) foi estudado entre o 17º e 21º dias de incubação (Experimento 1). Nas 24 h pós-eclosão foi pesquisado o efeito da presença ou não de alimento no lúmen intestinal sobre a utilização das reservas do saco vitelino (Experimento 2). Os achados deste trabalho mostraram que, ao contrário do embrião, o desenvolvimento do intestino delgado e o peso do saco vitelino não sofreram influência da idade das matrizes. Na fase pós-eclosão, na ausência de alimento, o desenvolvimento do intestino delgado foi maior nas matrizes com 60 semanas, sendo dependente do crescimento do jejuno. A presença do alimento no lúmen teve influência na utilização das reservas do saco vitelino apenas nas matrizes com 30 semanas de idade. Os resultados deste experimento mostraram que a idade da matriz é importante fator no desenvolvimento do trato gastrointestinal do embrião, sendo fator relevante no crescimento pós-ecloão dos pintos.

Canción popular, nacionalismo, consumo y política en Chile entre los años 40 y 60

Popular urban music is a typically modern cultural event. Its production, distribution and consumption occurred during the process of urbanization of Chile and in a period of growing availability of technological resources. The broadcasting by the mass media allowed popular urban music to reach a larger audience than the local public. Therefore it did not take long time for popular urban music to become a means of cultural homogenization within the parameters of the market system of production and distribution of music, in Chile. This article aims to map the connections between folk music and popular music, with the formation and consolidation of a consumer market for music in Chile. Besides it considers the use of popular music in the forfties and the sixties as a political tool by different groups of the Chilean society, during a time when arts were considered within the controversies about the national identity that arose in different Latin American countries.

Adsorption of copper(II) and cobalt(II) complexes on a silica gel surface chemically modified with 3-amino-1,2,4-triazole

The isotherms of adsorption of MX2 (M = Cu2+, Co2+; X = Cl-, Br-, ClO4) by silica gel chemically modified with 3-amino-1,2,4-triazole (SiATR) were studied in acetone and ethanol solutions, at 25 degrees C. The 3-amino-1,2,4-triazole molecule, covalently bound to the silica gel surface, adsorbs MX2 from solvent by forming a surface complex. At low loading, the electronic and electron spin resonance spectral parameters indicated that the Cu2+ complexes have distorted tetragonal symmetry. The CoX2 (X = Cl-, Br-) analogues exhibit a distorted-tetrahedral geometry, whilstthe (SiATR)mCo)ClO4)(2) complex has a tetragonally distorted octahedral geometry, with four equatorial nitrogen atoms around the cobalt. (C) 1998 Elsevier B.V. B.V. All rights reserved.

Voltammetric Studies of Cobalt Hexacyanoferrate Formed on the Titanium (IV) Phosphate Surface and its Application to the Determination of Sulfite

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prevalence of deep vein thrombosis and pulmonary embolism in superficial thrombophlebitis of the lower limbs: prospective study of 60 cases

Aim. Superficial thrombophlebitis (ST) ascending the lower limbs is a common disease, which may be associated with deep vein thrombosis (DVT) and pulmonary embolism (PE). The aim of this study was to investigate the prevalence of DVT and PE as complications of ascending ST of the lower limbs in the great saphenous vein (GSV) or SSV (SSV) and probable risk factors.Methods. For this study 60 consecutive patients were enrolled with ascending ST of the GSV or SSV, seen between 2000 and 2003 at a public hospital in Botucatu, SP, Brazil. All patients were assessed clinically, by venous Duplex scanning of the lower limbs to confirm ST and test for DVT, and by means of pulmonary scintigraphy to test for PE.Results. In 13 ST cases (21.67%) there was concomitant DVT and 17 ST patients (28.33%) also had PE. Eleven patients had a clinical status suggestive of DVT, but only in eight of these (61.5%), this clinical diagnosis was confirmed. Fourteen patients had a clinical status suggestive of PE, and this diagnosis was confirmed in six cases (35.30%). ST patients who also had DVT and/or PE were given anticoagulant treatment with heparin and warfarin. None of the variables studied was predictive of DVT or PE (P>0.05). However, the presence of varicose veins reduced the risk of patients having DVT (relative risk=9.09; 95%CI:1.75 - 50.00 and P=0.023).Conclusion. The prevalence rates of PE (28.3%) and DVT (21.6%) were elevated in this sample of ascending ST cases, indicating a need for detailed assessment of patients for signs of these complications, including for therapeutic management decision making. [Int Angiol 2009;28:400-8]

Edema de Reinke: estudo da imunoexpressão da fibronectina, da laminina e do colágeno IV em 60 casos por meio de técnicas imunoistoquímicas

Edema de Reinke é doença crônica da laringe na qual a camada superficial da lâmina própria é expandida por muco espesso conferindo-lhe aspecto gelatinoso. Relaciona-se ao tabagismo e acomete, preferencialmente mulheres, as quais apresentam a voz mais grave. Suas características histológicas nem sempre conseguem diferenciá-lo das demais lesões benignas da laringe, havendo necessidade de técnicas histológicas adicionais. OBJETIVOS: Estudar a imunoexpressão da fibronectina, do colágeno IV e da laminina no edema de Reinke por meio de técnicas imunoistoquímicas. Estudo prospectivo. MATERIAL E MÉTODOS: Blocos histológicos de 60 casos cirúrgicos de edema de Reinke foram resgatados, submetidos a novos cortes e às reações imunoistoquímicas para fibronectina, laminina e colágeno IV pelo método da Avidina Biotina Peroxidase. Todos os pacientes eram fumantes e adultos, sendo 50 mulheres e 10 homens. RESULTADOS: As análises da imunoexpressão da fibronectina, do colágeno IV e da laminina foram mais expressivas no endotélio dos vasos (68,33%, 76,66%, 73,33%, respectivamente), e menos relevantes na membrana basal (25,0%, 5,0% e 3,3%, respectivamente). CONCLUSÕES: No edema de Reinke, a imunoexpressão da fibronectina, da laminina e do colágeno IV na membrana basal não apresentam relevância, havendo predomínio desses anticorpos no endotélio do vasos.