Using of model updating considering damped frequency response function

The search for better performance in the structural systems has been taken to more refined models, involving the analysis of a growing number of details, which should be correctly formulated aiming at defining a representative model of the real system. Representative models demand a great detailing of the project and search for new techniques of evaluation and analysis. Model updating is one of this technologies, it can be used to improve the predictive capabilities of computer-based models. This paper presents a FRF-based finite element model updating procedure whose the updating variables are physical parameters of the model. It includes the damping effects in the updating procedure assuming proportional and none proportional damping mechanism. The updating parameters are defined at an element level or macro regions of the model. So, the parameters are adjusted locally, facilitating the physical interpretation of the adjusting of the model. Different tests for simulated and experimental data are discussed aiming at defining the characteristics and potentialities of the methodology.

Features of dielectric response in PMN-PT ferroelectric ceramics

In this paper, electrical and structural properties were reported for pyrochlore free (1-x)[Pb(Mg1/3Nb2/3)O-3] - xPbTiO(3) (PMN-PT) (with 35 mol% PbTiO3) ceramics obtained from fine powders. Dielectric studies were focused on the investigation of the complex dielectric permittivity (epsilon '-i epsilon '') as a function of frequency and temperature. The effects of the dc applied electric field on dielectric response were also investigated. Results revealed a field dependence dielectric anomaly in the dielectric permittivity curves (epsilon(T)) in the low dc electric field region, which in turn prevails in the whole analysed frequency interval. To the best of our knowledge, these properties for the PMN-PT ceramic system have not been reported before as in this work. The results were analysed within the framework of the current models found in the literature.

Comparison among three approaches for evaluation of sexual precocity in Nellore cattle

Restricted breeding seasons used in beef cattle produce censored data for reproduction traits measured in regard to these seasons. To analyze these data, adequate methods must be used. The objective of this paper was to compare three approaches aiming to evaluate sexual precocity in Nellore cattle. The final data set contained 6699 records of age at first conception (AFC14) (in days) and of heifer pregnancy (HP14) (binary) obtained from females exposed to the bulls for the first time at about 14 months of age. Records of females that did not calve in the following year after being exposed to a sire were considered censored (77.5% of total). The models used to obtain genetic parameters and expected progeny differences (EPDs) were a Weibull mixed and a censored linear model for AFC14 and threshold model for HP14. The mean heritabilities obtained were 0.76 and 0.44, respectively, for survival and censored linear models (for AFC14), and 0.58 for HP14. Ranking and Pearson correlations varied (in absolute values) from 0.54 to 0.99 (considering different percentages of sires selected), indicating moderate changes in the classification. Considering survival analysis as the best selection criterion (that would result in the best response to selection), it was observed that selection for HP14 would lead to a more significant decrease in selection response if compared with selection for AFC14 analysed by censored linear model, from which results were very similar to the survival analysis.

Effects of two chronic stress models on ligature-induced periodontitis in Wistar rats

Objectives: The present study aims at comparing the effects of physical and variable chronic stress on ligature-induced periodontitis in rats.Design: Forty-eight adult Wistar rats were randomly assigned to four groups (n = 12): physical stress, variable stress, positive control and negative control. The models of physical stress were immobilization and immobilization associated with exposure to cold. The models of variable stress were exposure to intermittent light, 24 h isolation, oral cavity examination, crowded environment, smell of blood and noise. After 10 days of physical or variable stress animals underwent experimental induction of periodontal disease in one oral side. Positive control also underwent experimental induction of periodontal disease on the 10th day. Negative control did not receive any type of intervention. At the end of the experimental period (60 days), all animals were euthanized. After routine laboratory processing, images of the histological sections were digitised and submitted to histometric measurement using two parameters: histologic attachment loss and bone loss.Results: Histological attachment loss and bone loss were greater (p < 0.05) in the physical stress group than in the other groups (variable stress, positive and negative control groups). on the non-periodontitis side, these same histological parameters did not significantly differ amongst groups.Conclusions: Physical stress negatively modulated the response pattern to experimentally induced periodontitis in rats. (C) 2011 Elsevier Ltd. All rights reserved.

pH-cycling models for in vitro evaluation of the efficacy of fluoridated dentifrices for caries control: strengths and limitations

Despite a plethora of in situ studies and clinical trials evaluating the efficacy of fluoridated dentifrices on caries control, in vitro pH cycling models are still broadly used because they mimic the dynamics of mineral loss and gain involved in caries formation. This paper critically reviews the current literature on existing pH-cycling models for the in vitro evaluation of the efficacy of fluoridated dentifrices for caries control, focusing on their strengths and limitations. A search was undertaken in the MEDLINE electronic journal database using the keywords "pH-cycling", "demineralization", "remineralization", "in vitro", "fluoride", "dentifrice". The primary outcome was the decrease of demineralization or the increase of remineralization as measured by different methods (e. g.: transverse microradiography) or tooth fluoride uptake. Inclusion of studies, data extraction and quality assessment were undertaken independently and in duplicate by two members of the review team. Disagreements were solved by discussion and consensus or by a third party. One hundred and sixteen studies were included, of which 42 addressed specifically the comparison of dentifrices using different pH-cycling models. The other studies included meta-analysis or reviews, data about the effect of different fluoride sources on de-remineralization, different methods for analysis de-remineralization and chemical variables and characteristics of dental hard tissues that might have influence on de-remineralization processes. Generally, the studies presented ability to detect known results established by clinical trials, to demonstrate dose-related responses in the fluoride content of the dentifrices, and to provide repeatability and reproducibility between tests. In order to accomplish these features satisfactorily, it is mandatory to take into account the type of substrate and baseline artificial lesion, as well as the adequate response variables and statistical approaches to be used. This critical review of literature showed that the currently available pH-cycling models are appropriate to detect dose-response and pH-response of fluoride dentifrices, and to evaluate the impact of new active principles on the effect of fluoridated dentifrices, as well as their association with other anti-caries treatments.

Some practical advice on polynomial regression analysis from blocked response surface designs

It is often necessary to run response surface designs in blocks. In this paper the analysis of data from such experiments, using polynomial regression models, is discussed. The definition and estimation of pure error in blocked designs are considered. It is recommended that pure error is estimated by assuming additive block and treatment effects, as this is more consistent with designs without blocking. The recovery of inter-block information using REML analysis is discussed, although it is shown that it has very little impact if thc design is nearly orthogonally blocked. Finally prediction from blocked designs is considered and it is shown that prediction of many quantities of interest is much simpler than prediction of the response itself.

Cytokine production in experimental paracoccidioidomycosis of murine selected lineages for acute inflammatory response (air)

Paracoccidioidomycosis is a systemic human mycosis caused by Paracoccidioides brasiliensis (P. brasiliensis), an imperfect dimorphic fungus whose conidia are its infective form. Mice genetically selected for maximum (AIRmax) and minimum (AIRmin) acute inflammatory response were used as experimental paracoccidioidomycosis models. The animals were intraperitoneally inoculated with P. brasiliensis (strain 18) and killed 6, 12 and 24 hours or 3, 7 and 14 days after infection. In these periods, fragments from their spleen, liver and lung were removed for evaluation of the infection level by fungal cells, assessment of macrophagic activity by peritoneal and splenic macrophages - through the determination of nitric oxide (NO) concentrations and production of pro- and anti-inflammatory cytokines of lung and spleen homogenate supernatants. In the present study, it was observed that AIRmax lineages presented greater control of the infectious process than the AIRmin ones. Regarding NO production, AIRmax animals produced more metabolites in late periods, what may help control the infectious process. Concerning cytokine production, it was observed that the production of INF-gamma, TNF-alpha, IL-1, IL-6, IL-8 and IL-12 were increased in AIRmax lineages in most analyzed organs and periods, thus contributing to the greater resistance exhibited by such lineages against infection, except for IL-4 and IL-10 that showed decreased production in AIRmax lineage, reproducing its suppressive biological effect. From these results, it was observed that the AIRmax lineage was more effective in controlling the infectious process, with an important involvement of the analyzed cytokines. These findings are probably related to the genetically selected factors involved in the acute inflammatory response.

Recovery from Strongyloides venezuelensis infection in Lewis rats is associated with a strong Th2 response

P>In this study, we investigated the characteristics of the infection and subsequent immunity induced by Strongyloides venezuelensis in Lewis rats. Animals were infected with 4000 L3 of S. venezuelensis and number of eggs per gram of faeces indicated an acute phase around day 8 and a recovery phase around day 32 after infection. A strong Th2 polarization during recovery phase was ascertained by a significant increase in IgG1 and IgE compared with that in the acute period. A shift in the cytokine profile confirmed these findings. A predominant production of IFN-gamma during the acute phase was followed by IL-10 production during recovery. Together these findings show that experimental infection of Lewis rats with S. venezuelensis presents a kinetics of parasite establishment and immunity similar to that described in other models of helminthic infection.

Optimisation of a continuous flash fermentation for butanol production using the response surface methodology

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mechanisms of insulin secretion in malnutrition: modulation by amino acids in rodent models

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relation of pretreatment sequence diversity in NS5A region of HCV genotype 1 with immune response between pegylated-INF/ribavirin therapy outcomes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Application of abrupt cut-off models in the analysis of the capacitance spectra of conjugated polymer devices

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Germination response of Hylocereus setaceus (Salm-Dyck ex DC: ) Ralf Bauer (Cactaceae) seeds to temperature and reduced water potentials

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Image analysis for assessing broiler breeder behavior response to thermal environment

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dynamic viscosity of binary and ternary mixtures containing poly(ethylene glycol), potassium phosphate, and water

Dynamic viscosity of binary mixtures of poly(ethylene glycol) molar mass 1500 da + water, potassium phosphate + water, and ternary mixtures of poly(ethylene glycol) molar mass 1500 da + potassium phosphate + water were determined at 303.15 K Binary and ternary mixture viscosities showed a direct logarithm-type relation with the increase of poly(ethylene glycol) and potassium phosphate contents. The models used for viscosity correlation gave a good fit to the experimental data.