Early Permian post-glacial bivalve faunas of the Itarare Group, Parana Basin, Brazil: Paleoecology and biocorrelations with South American intraplate basins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Projeto de um transdutor binocular utilizando extensometria e aplicação na pesagem rodoviária

With the passage of time, the variety of companies from each branch has gradually grown throughout the country. As a consequence, the logistics to attend to such demand has grown in the same proportion. One factor to highlight about this rapid growth is the increase of freight vehicles roaming the roads, often carrying loads over the limit established by law. At first it may seem that this would not bring any problem, however, note that an excessive number of overloads ends up deteriorating the asphalt, causing ondulations, potholes and other imperfections on the roads, which can cause accidents. In addition, the money spent for the maintenance of the roads is high. Thinking about it, it was established by law a regulation that restricts the weight limit for these vehicles, through axle weighing, subject to a fine. With this control the road floor is preserved for longer, requiring less maintenance expenses. The weighing stations use load cells to display the inferred weight, these cells use strain gages in its construction. The following work presents a methodology to dimension a binocular load cell, its main elements and its dimensioning. Showing how different materials can affect the dimensioning, so that can work satisfactorily. It also presents an overview of how are the parameters for weighing, and fines

Análise de características físicas de agregados de resíduos de construção e demolição, para fins de pavimentação

This work presents the results obtained in analyzes of aggregates from construction and demolition waste produced by the plant of the City of Guaratinguetá. Using this data and comparing with the specifications of NBR 15115, it was found that the materials do not possess the requisite minimum characteristics to be utilized as a basis for low-pavement traffic. In order to identify the main reasons of the material does not fit in the standard, we used the data obtained in a study conducted by Professor. Dr. Luiz Eduardo de Oliveira at the plant of the company AB Environmental Solutions Ltd., located in Pindamonhangaba. With different characteristics, the aggregates from construction and demolition waste produced by this plant showed the possibility of using pavements. The use of these residues in paving reduces the impact on the environment caused by construction.

Dimensionamento de pavimentos flexíveis para aeroportos

This work discusses the design of flexible pavements for airports, with the aid techniques and tools necessary for the calculation and design critical aircraft as the Boeing 777-300ER. Also discussed the layers that make up the pavement, the materials used and the method used for design pavement (FAA method)

Estudo sobre o potencial de alguns latossolos da região do Vale do Paraíba, estado de São Paulo, para uso em camadas estruturais de pavimentos de baixo volume de tráfego

The main purpose of this research is to raise, through lab rehearsals, the geometric properties of some oxisols from the region of Vale do Paraíba as well as comparing them to demands prescribed by Technical Specifications ESP08/05 of the Road Department of the State of Paraná, for sub-base or fine grained lateritic soil base (SAFL) and in the Technical Specification ET-DEP00/006 of the Road Department of the State of São Paulo (DER/SP) for subbase or crushed stone base. According to the results that were obtained it will be feasible to appraise the usage of these sorts of soils in structure layers of low-weight traffic pavements

Aplicação de sistema de gestão da qualidade na execução de obras de pavimentação asfáltica, baseado nas diretrizes da ABNT NBR ISO 9001:2008

This work brings to its content proposed deployment of a system of quality management in paving asphalt based on the elaboration of a basic training to meet those entering this area of civil engineering at a technical manual for the implementation of major services running on paving of roads. The training was designed to serve both those entering the field of asphalt paving, synthesizing the complex processes involved in paving services and providing an overview of the steps in implementation thereof, as well as entrants must meet the enterprise user of this system, providing them an idea of the method used by the company designing the paving of roads. The technical manual presented in turn, has 8 (eight) of the main services components of a work of paving, which are: Mobilization and Maintenance of construction site, Regularization and subfloor preparation, execution or sub-base BGS base (graded gravel plain), Execution of sub-base or base BGTC (graded gravel treated with cement), Implementation of subbase or base Macadam hydraulic Priming bituminous waterproofing, asphalt binder Priming and finally the execution flexible pavement - HMA (hot milled asphalt concrete). These services are presented in the form of IT-Education work, this seven items are presented that guide the performance of services, thus providing overall guidelines to perform the services described in it. The development of IT's was based on experiences in day-to-day paving near the theoretical precepts presented in the literature, so the conditions specified in these documents aim to always guide the implementation of services in general, giving the process a versatility major operation, as this work takes into account the dynamics of such services, as well as the variety of their execution according to local conditions and specified in the project. So in general we can say that this ... (Complete abstract click electronic access below)

Qualidade da construção civil de estrutura de concreto armado, alvenaria de vedação e revestimento externo de obras verticais

The main purpose of this research is to raise, through lab rehearsals, the geometric properties of some oxisols from the region of Vale do Paraíba as well as comparing them to demands prescribed by Technical Specifications ESP08/05 of the Road Department of the State of Paraná, for sub-base or fine grained lateritic soil base (SAFL) and in the Technical Specification ET-DEP00/006 of the Road Department of the State of São Paulo (DER/SP) for subbase or crushed stone base. According to the results that were obtained it will be feasible to appraise the usage of these sorts of soils in structure layers of low-weight traffic pavements

Algumas metodologias de avaliação para pavimentos de baixo volume de trafego

This work has as objective, show and compares some of several evaluation methods of pavements, based in the rules and researches realized by another authors, with focus on low traffic volume pavements, which are generally more economic flexible pavements subjected to low loads. Were addressed structure evaluation methods and superficial evaluation methods applied to that kind of pavement, exposing of clearly the procedures to be performed, the advantages and disadvantages, as well the results obtained in the execution of each one of these. This theme was chosen by the widespread use of this type of pavement in the road network of the country and the fact that there is no still a culture of the practical of evaluation nor technical knowledge on the part of municipal governments that are usually responsible for these roads. This study also aims to guide the process of maintenance preventive or recuperative, as they are often made improvements that do not actually solve the real problem of the roads

Estudo da influência da adição de resíduos de óleo em concretos para aplicação em pavimentos

Pós-graduação em Engenharia Civil - FEIS

Land use and thermal comfort in the county of Ourinhos, SP

This study aims to analyze the thermal comfort in urban areas for different land uses. The ENVImet microclimatic model has been used for urban boundary layer simulation, providing the following thermal comfort indexes: PMV (Predicted Mean Vote) and PPD (Predicted Percentage of Dissatisfaction). The chosen area covers the central area in the city of Ourinhos, located in southeastern Brazilian city, with subtropical climate. Four simulations were accomplished: an area with real buildings and vegetation on site, a “grassy” area where buildings have been replaced by grass in the central area, another grassy area, known as “grass/tree”, with additional trees in, and a final area called “Park” also grassy, where trees were added all over the area. The structures which showed thermal comfort within the ISO 7730 standards were the grassy area with no trees at 9 a.m., and a paved area, as well as the park area at 3 p.m. Other situations have presented values of PMV and PPD off the limits required by the rules; they were very close to those values. The only point that presented a far cry from the comfort required was the spot in the asphalt at 9 a.m. The other situations showed PMV and PPD values not far from the limits of comfort. Only the point on the asphalt showed values far from the limit of comfort at 9 a.m.