Upconversion fluorescence spectroscopy of Er3+/Yb3+-doped heavy metal Bi2O3-Na2O-Nb2O5-GeO2 glass

Upconversion fluorescence emission of Er3+/Yb3+-doped Bi2O3-Na2O-Nb2O5-GeO2 heavy metal glass samples excited at 1.06 mu m is experimentally investigated. The results reveal the existence of intense emission bands centered around 520, 545, and 655 nm. The germano-niobate based host glass presents high transparency in the region of 400-2700 nm, the capability of incorporating high dopant concentrations, high melting temperature, and large resistance to atmospheric moisture. The observed intensity of the green fluorescence emission, suggested that the niobium based host glass material plays an important role in the efficiency of the upconversion process. Emission lines centered at 425, 483, 503, 608, and 628 nm were also observed. (C) 1997 American Institute of Physics.

Prediction of occurrences of diverse chemical classes in the Asteraceae through artificial neural networks

The training and the application of a neural network system for the prediction of occurrences of secondary metabolites belonging to diverse chemical classes in the Asteraceae is described. From a database containing about 604 genera and 28,000 occurrences of secondary metabolites in the plant family, information was collected encompassing nine chemical classes and their respective occurrences for training of a multi-layer net using the back-propagation algorithm. The net supplied as output the presence or absence of the chemical classes as well as the number of compounds isolated from each taxon. The results provided by the net from the presence or absence of a chemical class showed a 89% hit rate; by excluding triterpenes from the analysis, only 5% of the genera studied exhibited errors greater than 10%. Copyright (C) 2004 John Wiley Sons, Ltd.

Placentation in cloned cattle: Structure and microvascular architecture

To elucidate the morphological differences between placentas from normal and cloned cattle pregnancies reaching term, the umbilical cord, placentomes and interplacentomal region of the fetal membranes were examined macroscopically as well as by light and scanning electron microscopy. In pregnancies established by somatic nucleus transfer (NT), the umbilical cord and fetal membranes were edematous. Placentomal fusion was common, resulting in increased size and a decreased number of placentomes. Extensive areas of the chorioallantoic membrane were devoid of placentomes. An increased number of functional or accessory microcotyledons (< 1 cm) were present at the maternally oriented surface of fetal membranes. Extensive areas of extravasated maternal blood were present within the placentomes and in the interplacentomal region. The crypts on the caruncular surface were dilated and accommodated complexes of more than one primary villus, as opposed to a single villus in non-cloned placentae. Scanning electron microscopy of blood vessel casts revealed that there was also more than one stem artery per villous tree and that the ramification of the vessels failed to form dense complexes of capillary loops and sinusoidal dilations as in normal pregnancies. At the materno-fetal interface, however, the trophoblast and uterine epithelium had normal histology. In conclusion, the NT placentas had a range of pathomorphological changes; this was likely associated with the poor clinical outcome of NT pregnancies. (c) 2007 Elsevier B.V. All rights reserved.

Artrópodes associados ao excremento de aves poedeiras

A research about arthropode fauna in laying hen excrement was carried out in a poultry house in the State of São Paulo, from January 2001 to December 2002. The objective was to verify the frequency of Diptera and Coleoptera collected by Berlese funil and flutuation methods, and to show correlation between the collect methods and sazonality possible in the currents seasons. A total of 29,499 insects were collected from seventy five collects, being 16,702 Diptera (six families) and 12,797 Coleoptera (four families). Some arthropodes presented direct relation with the collect method, the seasons of the years and the rainfall precipitation, with significant increase in the number of insects collected in certain periods of the year.

Phytoseiid mites (Acari: Phytoseiidae) found in soil and litter from Atibaia, State of São Paulo, Brazil, with description of two new species

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Short-Term Effects of Using Pedometers to Increase Daily Physical Activity in Smokers: A Randomized Trial

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

On non-linear W-infinity symmetry of generalized Liouville and conformal Toda models

Invariance under non-linear Ŵ∞ algebra is shown for the two-boson Liouville type of model and its algebraic generalizations, the extended conformal Toda models. The realization of the corresponding generators in terms of two boson currents within KP hierarchy is presented.

Postharvest conservation of 'Tommy Atkins' mango fruit influenced by gamma radiation, wax, hot water, and refrigeration

It was aimed to extend the postharvest conservation of 'Tommy Atkins' mango fruits harvested in break maturity stage. Fruits were submitted at the following treatments: hot water treatment (55°C for 5 minutes) and benomyl 1,000 mg.L-1; irradiation with 0,8 or 1,0 kGy; irradiation associated at carnaúba wax; and control. The fruits were stored at 10°C and 85 - 90%RH during 21 days, and then removed to ambient temperature (25,7±0,7°C and 87,1±2,2%RH). Through the storage time, the evolution of fresh weight, color, rottenness, total soluble solids (TSS), total titratable acidity (TTA), and TSS/TTA ratio were measured. 'Tommy Atkins' mango fruits can have shelf life notably increased, when they were submitted to hot water treatment (55°C for 5 minutes) or γ radiation (0,8 and 1,0 kGy), associated with carnaúba wax application, before cold storage. These treatments increased the fruit resistance at refrigerated storage, and improved shelflife after transferring to ambient temperature.

Diagnósticos e intervenções de enfermagem aos pacientes em terapia anticoagulante.

Patients under treatment with oral anticoagulants present specific needs for which nursing care plays an important role, especially to prevent complications. The present review was carried out aiming at discussing nursing diagnoses for these patients by using the system of the North American Nursing Diagnoses Association--NANDA. Diagnoses for such patients depict the risk of bleeding and rethrombosis almost always due to the ineffective control of the therapeutic regimen and the deficit in the volume of fluids during active bleeding. Also, nursing interventions and assessment criteria are proposed for such conditions. The authors see the team's preparation to deal with such therapy as relevant for successful assistance.

Effect of microwave treatments on dimensional accuracy of maxillary acrylic resin denture base

Microwave energy has been used as an alternative method for disinfection and sterilization of dental prostheses. This study evaluated the influence of microwave treatment on dimensional accuracy along the posterior palatal border of maxillary acrylic resin denture bases processed by water-bath curing. Thirty maxillary acrylic bases (3-mm-thick) were made on cast models with Clássico acrylic resin using routine technique. After polymerization and cooling, the sets were deflasked and the bases were stored in water for 30 days. Thereafter, the specimens were assigned to 3 groups (n=10), as follows: group I (control) was not submitted to any disinfection cycle; group II was submitted to microwave disinfection for 3 min at 500 W; and in group III microwaving was done for 10 min at 604 W. The acrylic bases were fixed on their respective casts with instant adhesive (Super Bonder®) and the base/cast sets were sectioned transversally in the posterior palatal zone. The existence of gaps between the casts and acrylic bases was assessed using a profile projector at 5 points. No statistically significant differences were observed between the control group and group II. However, group III differed statistically from the others (p<0.05). Treatment in microwave oven at 604 W for 10 min produced the greatest discrepancies in the adaptation of maxillary acrylic resin denture bases to the stone casts.

Saponinas triterpênicas de Tocoyena brasiliensis Mart. (Rubiaceae)

The present communication reports the isolation and identification of four triterpenoid saponins from the chloroform extract of the leaves of Tocoyena brasiliensis: 3-O-β-D-quinovopyranosyl quinovic acid, 3-O-β-D- quinovopyranosyl cincholic acid, 3-O-β-D-glucopyranosyl quinovic acid and the 28-O-β-D-glucopyranosyl ester derivative of quinovic acid as binary mixtures, respectively. From the ethanol extract a flavonoid identified as ramnazin-3-O-rutinoside was obtained. The structures of these compounds were assigned by data analysis of ID and 2D NMR spectrometry and comparison with data recorded in the literature for these compounds.

Investigação soroepidemiológica de leptospirose canina na área territorial urbana de Botucatu, São Paulo, Brasil

Leptospirosis was seroepidemiologically investigated in 775 dogs from Botucatu, state of Sao Paulo, in blood samples collected during the annual anti-rabies vaccination campaign. The samples were collected from 14 out of the 45 vaccination stations geographically distributed in five different municipal districts, with a territorial urban area of 31Km2. Samples were taken from 449 males and 326 females; 564 were of undetermined breed, and 211 were pedigree animals; ages ranged from 3 months to 20 years. Diagnosis included the microscopic serum agglutination tests using 12 Leptospira spp serovars. Serological results and epidemiological variables were compared using Goodman and chi-square tests, with χ=0.05. There were 119 (15.3%) positive samples for 11 serovars; the most important was canicola with 48 (40.3%), followed by pyrogenes 41 (34.5%). Statistical analysis showed significant difference for: breed, 17.7% positive in undetermined breeds and 9.0% in pedigrees; and sex, 18.4% positive in males and 11.0% in females. There was no statistically significant difference in relation to age with uniform distribution of positives.

The reproductive biology and cycle of Rioraja agassizi (Müller and Henle, 1841) (Chondrichthyes: Rajidae) in southeastern Brazil, SW Atlantic Ocean

Specimens of Rioraja agassizi were collected at Guarujá pier, São Paulo State, Brazil, from March 2005 to March 2006. A total of 275 males were captured. Based on the analysis of the clasper length, gonad weight, clasper gland length, alar thorns and lobule diameter, the size-at-maturity was estimated to be 32 cm. There were 1049 females in the record. Size-at-maturity was calculated in 40 cm. Sexual resting females were observed. Gonadosomatic and hepatosomatic indexes varied significantly in both sexes throughout the year. However, ovulation, egg-laying and presence of sperm in the seminal vesicle were observed all year round. For this reason, an annual cycle with at least one peak in the sexual activity is proposed for this species.

Turning of compacted graphite iron using commercial tiN coated Si 3N4 under dry machining conditions

Due to their high hardness and wear resistance Si3N4 based ceramics are one of the most suitable cutting tool materials for machining hardened materials. Therefore, their high degree of brittleness usually leads to inconsistent results and sudden catastrophic failures. Improvement of the functional properties these tools and reduction of the ecological threats may be accomplished by employing the technology of putting down hard coatings on tools in the state-of-the-art PVD processes, mostly by improvement of the tribological contact conditions in the cutting zone and by eliminating the cutting fluids. However in this paper was used a Si3N4 based cutting tool commercial with a layer TiN coating. In this investigation, the performance of TiN coating was assessed on turning used to machine an automotive grade compacted graphite iron. As part of the study were used to characterise the performance of cutting tool, flank wear, temperature and roughness. The results showed that the layer TiN coating failed to dry compacted graphite iron under aggressive machining conditions. However, using the measurement of flank wear technique, the average tool life of was increased by VC=160 m/min.The latter was also observed using a toolmakers microscope and scanning electron microscopy (SEM).