Fixation of autogenous bone grafts with ethyl-cyanoacrylate glue or titanium screws in the calvaria of rabbits

This study compared the fixation of autogenous onlay bone grafts with cyanoacrylate glue (Super Bonder) and with titanium screws. Twenty rabbits underwent bilateral parietal ostectomies. Bone segments were fixed anteriorly to the resulting bone defect. In group I, the grafts were fixed with 4 min long, 1.5 mm diameter screws; in group II, adhesive was used. The animals were killed after 5, 15, 30, 60 and 120 days. Histomorphometric analysis was used to quantify the maintenance of the graft area. Discrete areas of inflammatory reaction were seen in both groups after 5 days and for group II after 15 days. After 30 days, new bone formation was seen at the interface of the grafts. After 120 days, the graft was incorporated into the host bed in group I and partially incorporated in group II. There was a significant statistical difference regarding the mean graft areas between 15 and 120 days (p < 0.001) and between fixation methods (p < 0.002). Fixation with adhesive promoted a significantly greater area of bone graft than screw fixation, independent of time period. The adhesive was biocompatible, presented similar stability to the screw and maintained the bone area, although there was a delay in graft incorporation.

Effect of dentin conditioning time on nanoleakage

Objectives: To study the nanoleakage pattern in the dentin hybrid layer by using different dentin adhesives. The null hypotheses tested in this study were: 1) dentin conditioning time does not affect nanoleakage within the hybrid layer; 2) the type of dentin adhesive used does not affect nanoleakage. Methods: Standardized Class V cavities were prepared in 30 intact human molars on the buccal and lingual surfaces. The specimens were randomly assigned to 2 total-etch dentin adhesives (OptiBond SOLO Plus [OPS, Kerr] and One-Step [ONS, BISCO Inc]) and 2 self-etch dentin adhesives (Clearfil SE Bond [CSE, Kuraray] and Adper Prompt L-Pop [APL, 3M ESPE]). The specimens were etched or conditioned for 15 seconds, 30 seconds or 60 seconds. Upon restoration of the Class V cavities with the proprietary resin composite, the specimens were isolated with nail polish except for a 2.0-mm rim around the restoration, and they were immersed in 50 wt% ammoniacal silver nitrate solution (pH=9.5) for 24 hours followed by 8 hours of immersion in photo-developing solution to reduce the silver ions to metallic silver. The specimens were fixed, dehydrated and processed for FESEM and TEM. Silver penetration was measured along the cervical wall, and data were analyzed with Kruskal-Wallis non-parametric tests at a significance level of 95%. Results: There were no statistically significant differences among the experimental groups for the factor conditioning time (p>0.926). There were significant differences for the variable dentin adhesive (p<0.0001). The least amount of nanoleakage within the hybrid layer occurred with CSE, while ONS resulted in the greatest penetration of silver ions. The adhesives OPS and APL ranked in the intermediary subset. Under TEM, all adhesives resulted in some degree of nanoleakage within the hybrid layer. Both spotted/reticular and water-tree nanoleakage patterns were observed. Significance: Longer conditioning times did not increase nanoleakage within the hybrid layer. Nanoleakage varied with the type of adhesive used.

Evaluation of marginal microleakage in Class II cavities: Effect of microhylolrid, flowable, and compactable resins

Objective: the goal of the present study was to evaluate the microleakage on the cementum/dentin and enamel surfaces in Class 11 restorations, using different kinds of resin composite (microhybrid, flowable, and compactable). Method and materials: Forty human caries-free molars were extracted and selected. Eighty Class 11 standardized cavities were made in the cervical wall at the cementoenamel junction (CEJ) and at the mesial and distal surfaces. The teeth were divided into four groups: G1 - adhesive system + microhybrid resin composite Z100; G2 - adhesive system + compactable resin composite Prodigy Condensable; G3 - adhesive system + flowable resin composite Revolution + Z1 00 resin composite; G4 - adhesive system + Revolution fluid resin + compactable resin composite Prodigy Condensable. The adhesive system used in this study was Scotchbond Multi-Purpose Plus. The specimens were thermocycled in baths of 5degreesC and 55degreesC for 1,000 cycles and immersed in 50% silver nitrate solution. The specimens then were sectioned and evaluated on degree of dye penetration. Results: the results were evaluated using the nonparametric Kruskall-Wallis test, which showed a statistically significant difference between groups G1 and G4, G2 and G4, and G3 and G4. Conclusions: None of the materials was able to eliminate the marginal microleakage at the cervical wall; the application of a low-viscosity resin composite combined with a compactable resin composite significantly decreased the microleakage.

Assessing the surface roughness of a posterior resin composite: effect of surface sealing

This study assessed the in vitro influence of surface sealing on the surface roughness of a posterior resin composite before and after tooth-brushing. Thirty. specimens (13 nun diameter x 1 mm high) were fabricated from Filtek-P60 resin composite and randomly assigned to three groups (n=10): a non-sealed control and two groups sealed with one of the tested materials-a surface-penetrating sealant (Protect-it!-PI) and a one bottle adhesive system (Single Bond-SB). The samples were subjected to a surface roughness reading to determine the initial roughness, then submitted to simulated toothbrushing with 35,600 cycles for 100 minutes. Specimens were then cleaned and a post-abrasion surface roughness reading accomplished. Means (pm), recorded before (B) and after (A) toothbrushing, and standard deviations were: Control-(B): 0.032 (+/-0.005), (A): 0.054 (+/-0.005); PI-(B): 0.034 (+/-0.005), (A): 0.060 (+/-0.034); SB (B): 0.031 (+/-0.004), (A): 0.047 (+/-0.007). Data were tabulated and submitted to two-way ANOVA. No statistically significant difference was observed when the control and experimental groups were compared. However, a significant difference (p<0.05) was found between the measurements performed before and after toothbrushing. Based on these results, it may be concluded that using either a surface penetrating sealant or a one bottle adhesive system did not provide the optimization of superficial integrity. The use of a dentifrice and toothbrush resulted in significant alterations to the surface smoothness of the resin composite.

Fracture resistance of bleached teeth restored with different procedures

This study evaluated the fracture resistance of teeth submitted to internal bleaching and restored with different non-metallic post. Eighty mandibular incisors were endodontically treated and randomly divided in 10 groups (n = 8): G1- restored with composite resin (CR), G2- CR + fiber-reinforced composite post (FRC, Everstick post, Sticktech) cemented with resin cement self-etch adhesive (RCS, Panavia F 2.0, Kuraray), G3- CR + FRC + self-adhesive resin cement (SRC, Breeze, Pentral Clinical), G4- CR+ glass fiber post (GF, Exacto Post, Angelus) + RCS, G5- CR + GF + SRC. The G6 to G10 were bleached with hydrogen peroxide (HP) and restored with the same restorative procedures used for G1 to G5, respectively. After 7 days storage in artificial saliva, the specimens were submitted to the compressive strength test (N) at 0.5 mm/min cross-head speed and the failure pattern was identified as either reparable (failure showed until 2 mm below the cement-enamel junction) or irreparable (the failure showed <2 mm or more below the cement-enamel). Data were analyzed by ANOVA and Tukey test (α = 0.05). No significant difference (p < 0.05) was found among G1 to G10. The results suggest that intracoronal bleaching did not significantly weaken the teeth and the failure patterns were predominately reparable for all groups. The non-metallic posts in these teeth did not improve fracture resistance.

Accuracy of Digital Images in the Detection of Marginal Micro leakage: An In Vitro Study

Purpose: To evaluate the accuracy of Image Tool Software 3.0 (ITS 3.0) to detect marginal microleakage using the stereomicroscope as the validation criterion and ITS 3.0 as the tool under study.Materials and Methods: Class V cavities were prepared at the cementoenamel junction of 61 bovine incisors, and 53 halves of them were used. Using the stereomicroscope, microleakage was classified dichotomously: presence or absence. Next, ITS 3.0 was used to obtain measurements of the microleakage, so that 0.75 was taken as the cut-off point, and values equal to or greater than 0.75 indicated its presence, while values between 0.00 and 0.75 indicated its absence. Sensitivity and specificity were calculated by point and given as 95% confidence interval (95% CI).Results: The accuracy of the ITS 3.0 was verified with a sensitivity of 0.95 (95% CI: 0.89 to 1.00) and a specificity of 0.92 (95% CI: 0.84 to 0.99).Conclusion: Digital diagnosis of marginal microleakage using ITS 3.0 was sensitive and specific.

Release and diffusion of hydroxyl ion from calcium hydroxide-based medicaments

The release and diffusion of hydroxyl ions (OH-) of calcium hydroxide (Ca(OH)2)-based intracanal medications may be affected by the association with other substances. The aim of this study was to evaluate the diffusion of OH- ions through root dentin by the medications: G1, Ca(OH)2/saline; G2, Calen; G3, Calen/camphorated p-monochlorophenol (CMCP); and G4, Calen/0.4% chlorhexidine (CHX). Root canals from bovine teeth were prepared in a standardized manner. A cavity until dentin was prepared in the middle third of the root surface of each specimen. The external surface of the root was made impermeable using a layer of adhesive, except the prepared cavity. The root canals were filled with different medications, and teeth were individually stored in flasks containing 10 ml distilled water at 37 degrees C. The water pH was measured at 1, 3, 7, 14, 21, 30, and 60 days. Data obtained were subjected to anova and Tukeys tests. Increase in pH was observed at 3 days for Calen/CHX and from 7 to 14 days for the other mixtures. Calen paste promoted pH increase up to 21 days. Calen/CMCP had the highest pH up to 21 days, and all groups had similar results at 30 days. At 60 days, the greatest pH values were observed for Calen/CMCP and Calen alone. All different formulations of Ca(OH)2-based medications tested release hydroxyl ion that can diffuse through the dentin.

THE EFFECT of IMMEDIATE DENTIN SEALING on THE MARGINAL ADAPTATION and BOND STRENGTHS of TOTAL-ETCH and SELF-ETCH ADHESIVES

Statement of problem. Sealing ability and bond strengths of total-etch and self-etch dentin adhesives used for immediate dentin sealing have not been assessed and established.Purpose. The purpose of this study was to determine the effectiveness of immediate dentin sealing (IDS) using total-etch or self-etch dentin adhesives on microleakage and microtensile bond strength.Material and methods. Twenty recently extracted molars were selected, and standard MOD inlay preparations were made with the gingival margins located below the cemento-enamel unction. The teeth were assigned to 4 experimental groups (n=5) according to the indirect composite restoration cementation technique used: (1) immediate dentin sealing with Adper Single Bond (TEBI); (2) conventional adhesive cementation technique using Adper Single Bond (TEAI); (3) immediate dentin sealing using Adper Prompt L-Pop (SEBI); or (4) conventional adhesive cementation technique using Adper Prompt L-Pop (SEAI). The restored teeth were thermal cycled 1,000 times between 5 degrees and 55 degrees C and then immersed in 50% ammoniacal silver nitrate. Three specimens per restoration were evaluated for microleakage, according to predefined scores, and submitted to Friedman's test (alpha-.05). The specimens were then sectioned to obtain 0.8 +/- 0.2-mm-thick sticks (with n ranging from 32 to 57 specimens) and submitted to microtensile bond strength (mu TBS) testing. The obtained data were submitted to 2-way ANOVA test (alpha=.05).Results. None of the experimental groups demonstrated complete elimination of marginal microleakage. There were significant differences in microleakage of the tested adhesives (P>.001). IDS microleakage scores were similar to those obtained using the conventional cementation technique (CCT) for both adhesives. The highest mean bond strengths were obtained with TEBI (51.1 MPa), whereas SEAI showed the lowest mean bond strengths (1.7 MPa). IDS resulted in significantly higher bond strengths than CCT (P<.001).Conclusions. Total-etch and self-etch adhesives have a significant effect on IDS. IDS resulted in high bond strengths for both adhesives; however, the microleakage was similar to that obtained with CCT (J Prosthet Dent 2009;102:1-9)

Comparative scanning electron microscopic study of the effect of different dental conditioners on dentin micromorphology

This study evaluated comparatively by scanning electron microscopy (SEM) the effect of different dental conditioners on dentin micromorphology, when used according to the same protocol. Forty dentin sticks were obtained from 20 caries-free third human molars and were assigned to 4 groups corresponding to 3 conditioners (phosphoric acid 37%, Clearfil SE Bond and iBond) and an untreated control group. After application of the conditioners, the specimens were immersed in 50% ethanol solution during 10 s, chemically fixed and dehydrated to prepare them to SEM analysis. In the control group, dentin surface was completely covered by smear layer and all dentinal tubules were occluded. In the phosphoric acid-etched group, dentin surface was completely clean and presented exposed dentinal tubule openings; this was the only group in which the tubules exhibited the funnel-shaped aspect. In the groups conditioned with Clearfil SE Bond primer and iBond, which are less acidic than phosphoric acid, tubule openings were occluded or partially occluded, though smear layer removal was observed. SE Bond was more efficient in removing the smear layer than iBond. In the Clearfil SE Bond group, the cuff-like aspect of peritubular dentin was more evident. It may be concluded all tested conditioners were able to change dentin morphology. However, it cannot be stated that the agent aggressiveness was the only cause of the micromorphological alterations because a single morphological pattern was not established for each group, but rather an association of different aspects, according to the aggressiveness of the tested conditioner.

Regulador vegetal e bioestimulante na indução floral do maracujazeiro-amarelo em condições de entressafra

O objetivo do trabalho foi avaliar o efeito de regulador vegetal e de bioestimulante na indução floral do maracujazeiro-amarelo em condições não-indutivas, em Araguari-MG. Foram identificados e podados 12 ramos terciários por parcela (02-04-05), sendo 6 deles expostos de um lado da espaldeira, com luminosidade predominante pela manhã e 6 do outro lado da espaldeira, com luminosidade à tarde. O delineamento experimental foi em parcelas subdivididas, com 7 tratamentos principais (parcelas): 0mg L-1 (testemunha); 100mg L-1; 200mg L-1 e 300mg L-1 de regulador vegetal GA3 (i.a.); 2,08 mL L-1; 4,17mL L-1 e 6,25mL L-1 de bioestimulante Stimulate® (i.a.), em duas aplicações foliares (09-04-02 e 09-05-02), acrescidas de espalhante adesivo Silwett® a 0,05%. Além desses, foram utilizados 2 tratamentos secundários (subparcelas): exposição dos ramos à luminosidade da manhã e da tarde, com 4 repetições de 3 plantas por parcela. Cada subparcela foi um dos dois lados da espaldeira. As médias foram comparadas pelo teste de Tukey, a 5% de probabilidade. Realizou-se, aos 75 dias, a avaliação nos dois lados da espaldeira do comprimento dos ramos e entrenós, número de nós, de folhas e de botões florais. As variáveis estudadas não foram influenciadas pelo uso de GA3 e Stimulate®, no entanto houve diferença quando os ramos ficaram expostos à luminosidade da manhã em relação àqueles com luminosidade à tarde.

Effect of Baccharis dracunculifolia DC (Asteraeeae) extracts and its isolated compounds on macrophage activation

Baccharis dracunculifolia D.C. (Asteraceae), a shrub which grows wild in Brazil, is the main botanical source of Brazilian green propolis. Since Brazilian propolis shows an immunomodulatory activity, the goal of this work was to evaluate the action of B. dracunculifolia extracts and some of its isolated compounds on reactive oxygen intermediate (H2O2) production by macrophages obtained from male BALB/c mice. The results showed that the leaf (Bd-L) (25, 50, and 100 mu g mL(-1)), leaf rinse (Bd-LR) (25 mu g mL(-1)), and the root (Bd-R) (25 mu g mL(-1)) extracts enhanced H2O2 release by macrophages. A phytochemical study of the root and leaves of B. dracunculifolia was carried out. The chromatographic fractionation of Bd-R, using several techniques, afforded the isolation of baccharis oxide (1), friedelanol (2), viscidone (11), 11-hydroxy-10,11-dihydro-euparin (12), and 6-hydroxy-tremetona (13), while Bd-LR gave the following isolated compounds: baccharis oxide (1), friedelanol (2), isosakuranetin (3), aromadendrin-4'-methyl ether (4), dihydrocumaric acid (5), baccharin (6), hautriwaic acid lactone (7), hautriwaic acid acetate (8), drupanin (9), and cumaric acid (10). Among the isolated compounds, baccharis oxide (1) and friedelanol (2) increased H2O2 production at a concentration of 1001,M. This is the first time that the presence of compounds 7, 8, 12, and 13 in B. dracunculifolia has been reported. Based on these results it is suggested that the crude extracts and some isolated compounds from B. dracunculifolia display an immunomodulatory action.

Follicular epithelium, theca and egg envelope formation in Serrasalmus spilopleura (Teleostei, Characiformes, Characidae)

The follicular epithelium and theca of oocytes in Serrasalmus spilopleura differentiates during the initial primary growth phase. The follicular cells are squamous and the thecal cells are disposed in two layers. During the secondary growth phase, follicular cells become cuboidal, acquire characteristics typical of protein- or glycoprotein-producing cells, and show dilated intercellular spaces. Formation of the egg envelope in S. spilopleura begins in the previtellogenic oocytes as a layer of amorphous electron-dense material is laid down on the oolemma. During vitellogenesis, another layer of electron-dense material appears beneath the first layer. Also during this phase, a layer of amorphous, less electron-dense material is formed adjacent to the follicular epithelium. The secondary egg envelope appears at the postvitellogenic phase and is composed of a filamentous and undulant material. The morphology of the egg envelopes in S. spilopleura reflects not only its oviparous nature but also the fact that its eggs are adhesive.

Ultrastructure of Giardia duodenalis trophozoites group from hamster: some relevant aspects

Throphozoites of Giardia duodenalis group obtained from fragments or scratched of hamster's mucosa were examined by transission electron microscopy. The fine structure of the trophozoites are presented and comapred with those described for other animals. Some of the trophozoites present the cytoplasm full of glycogen, rough endoplasmic reticulum-like structures and homogeneous inclusions not enclosed by membranes, recognized as lipid drops, which had not been observed in Giardia from other animals. The adhesive disk is composed of a layer of microtubules, from which fibrous ribbons extend into the cytoplasm; these ribbons are linked by layer of crossbridge filaments that shows an intermediary dense band, described for the first time in this paper. The authors regard this band as the result of the cross-bridge filaments slinding in the medium region between adjacent fibrous ribbons, and suggest a contractile activity for them. The role of the adhesive disk on the trophozoite mechanism of attachment to host mucosa is also discussed.

Structure determination of a tetrahydro-beta-carboline of arthropod origin: A novel alkaloid-toxin subclass from the web of spider Nephila clavipes

The orb-web spiders are polyphagous animals in which the web plays a very important role in the capture of preys; oily droplets usually cover the capture-web of the spider Nephila clavipes and seem to be of great importance for prey capture. The knowledge of the chemical composition of these droplets is necessary to understand the function of this adhesive material in web mechanics and prey capture. A novel subclass of spider toxins, tetrahydro-beta-carboline, was identified among the weaponry of compounds present inside of oily droplets. This type of alkaloid is not common among the natural compounds of spider toxins. Apparently, when the prey arthropods get caught by the spider web, their bodies are covered with many adhesive oily droplets, which disrupt delivering the tetrahydro-beta-carboline to the direct contact with the prey integument. Toxicity assays demonstrated a potent lethal effect of the alkaloid toxin to the spider preys; topical applications of the teirahydro-beta-carboline at first caused clear signs of neurotoxicity, followed by the death of preys. The structure of the major component, a tetrahydro-beta-carboline, among the alkaloid toxins was elucidated by means of UV spectrophotometry, ESI mass spectrometry, H-1-NMR spectroscopy, and high-resolution mass spectrometry. The structure of the natural toxin was determined as 1-(2-guanidinoethyl)-1,2,3,4-tetrahydro-6-hydroxymethyl)-beta-carboline; the investigation of the pharmacological properties and neurotoxic actions of this compound may be used in the future as reference for the development of new drugs to be applied at level of pest control in agriculture.

The chelation of metal ions by the acylpolyamine toxins from the web-spider Nephilengys cruentata: effects in the intoxication/detoxification of preys

Orb-web-spiders present a series of different strategies for prey capture, involving the use of different types of silk for web building, the use of adhesive traps in the webs, the secretion of toxic compounds to the spider's preys in the adhesive coating of the capture web and the biosynthesis of a wide range of structurally related acylpolyamine toxins in their venoms. The polyamine toxins usually block neuromuscular junctions and/or the central nervous system (CNS) of Arthropods, targeting specially the ionotropic glutamate receptors; this way these toxins are used are as chemical weapons to kill / paralyze the spider's prey. Polyamine toxins contain many azamethylene groups involved with the chelation of metal ions, which in turn can interact with the glutamate receptors, affecting the toxicity of these toxins. It was demonstrated that the chelation of Ni+2, Fe+2, Pb+2, Ca+2 and Mg+2 ions by the desalted crude venom of Nephilengys cruentata and by the synthetic toxin JSTX-3, did not cause any significant change in the toxicity of the acylpolyamine toxins to the model-prey insect (honeybees). However, it was also reported that the chelation of Zn+2 ions by the acylpolyamines potentiated the lethal / paralytic action of these toxins to the honeybees, while the chelation of Cu+2 ions caused the inverse effect. Atomic absorption spectrometry and Plasma-ICP analysis both of N.cruentata venom and honeybee's hemolymph revealed that the spider's venom concentrates Zn+2 ions, while the honeybee's hemolymph concentrates Cu+2 ions. These results are suggesting that the natural accumulation of Zn+2 ions in N. cruentata venom favors the prey catching and/or its maintenance in the web, while the natural accumulation of Cu+2 ions in prey's hemolymph minimizes the efficiency of the acylpolyamine toxins as killing/paralyzing tool.