Variação na estrutura da vegetação de duas cultivares de Panicum maximum jacq. (colonião e tabiatã) submetidas a diferentes tipos de manejo. Composição em proteína bruta e digestibilidade In vitro da matéria seca

This work was carried out at FCAV-UNESP, Campus of Jaboticabal, Brazil, to study the effects of nitrogen fertilization (0 and 50 kg N/ha/cut), three sucessive periods of growth (December 21st 1987, January 25th 1988 and February 29th 1988)) and three cutting ages (28, 35 and 42 days) on composition in crude protein and in vitro dry matter digestibility of two cultivars of Panicum maximum Jacq. i.e., Coloniao and Tobiata. Plants were harvested in five vertical layers above soil level (0-20, 20-40, 40-60, 60-80 and over 80 cm). The samples were divided in: green leaves, green stems and dry material. Generally, values of in vitro dry matter digestibility and the levels of crude protein of both cultivars were greater in the higher layers of the vegetation, with a decrease, however, for the other layers and more advanced phases of plants development, mainly with no N fertilization.

Uso de indicadores para estimar fluxos de matéria seca ileal em eqüinos fistulados

This experiment was carried out with six half-bred Bretao-Campolinacolts with ileum fistulated to evaluate the difference in the ileum dry matter flow estimated by chromic oxide, cellulose, NDF, lignin and fecal lignin through the collection of ileum samples digesta at 28 h intervals, totalizing six samples per animal, starting at 10:00 a.m. The animals were fed ad libitum with the following diets: R1: clephantgrass, R2: elephantgrass plus ground corn, and R3: elephantgrass plus ground corn plus soybean meal. The data was statistically described, based on the coefficient of variation. The values of dry matter prececal digestion coefficients were, respectively, for diets 1, 2 and 3, at six schedules, for cellulose (-16.4; 21.4 and 6.6%), NDF(-34.7; 28.8 and -12.8%), to lignin (-51.5; -5.1 and -25.7%), in two schedules for cellulose (-13.4; 25.6 and 21.5%), fecal lignin (-37.1, 16.6 and -6.4%) and chromic oxide (-219.3, 36.4 and 9.5%). The coefficients of variation were, respectively, for the diets i, 2 and 3, at six schedules, for cellulose (148.3; 107.5 and 522.7%), NDF (95.4; 80.9 and 314.3%), lignin (210.2; 752.3 and 209.6%), at two schedules for cellulose(148.5; 80.7 and 70.0%), fecal lignin, (262.4; 177.9 and 723.5%) and chromic oxide (141.1; 158.9 and 473.4%). In diet i, the ileum dry matter now were over estimated for all markers, showing that chosen collection lime to estimate the flows were not adequate. Based on the coefficient of variation of the diets 2 and 3, the cellulose at two schedules was the most marker indicator to determine the ileum dry matter flow.

Determination of soybean seed respiration rate by the titulation method

This trial was carried out under laboratory conditions, with three lots of Iguacu soybean seeds, to determine the respiration rate by the titulation method. A randomized complete block design was used, with four repetitions, each one of them with 50 seeds and a control without seeds for each lot. The seeds were placed in gerbox with 40 mi of KOH 0.1N, on distilled water wet blotting paper for fixing the CO2 produced by seeds respiration. The material was placed in germinator at constant 25 degrees C for 16, 24 and 48 hours. After these periods, the titulation of the fixative solution was performed with HCl 0.1N to check the respiration rate. The most deteriorated seeds were those that presented the highest respiration rates, which were measured in mg of CO2/g of dry matter, when compared with the most vigorous lots. The titulation method was suitable for the evaluation of soybean seed respiration rate because the final results separated the lots in three different quality levels that were compatible with the results obtained from the accelerated aging and emergence.

Efeito da calagem sobre a produção de matéria seca de três gramíneas forrageiras

A greenhouse investigation was carried out to study the effects of liming on the dry matter (DM) production of the grasses Brachiaria brizantha (Hoscht.) Stapf. cv. Marandu, Andropogon gayanus Kunth cv. Planaltina and Panicum maximum Jacq cv. Aruana, cultivated on a Dark-Red Latosol, medium texture. The liming levels were obtained through the addition of carbonates in a Ca:Mg ratio of 4:1, necessary to increase the degree of base saturation (V%) to the following values; 4% (control), 20%, 36%, 52%, 68% and 84%. During the experimental period (180 days), four cuts were done to determine the DM production. The results indicated that the DM production was increased (P<0,05) with the liming-levels increased to the three grasses. Panicum maximum cv. Aruana yielded the lower DM quantity, but it presented a better response to liming. The inverse was observed in relation to A. gayanus. The data allowed to conclude that the DM production increased by liming and when the V% level was lower than 50%, it will be increased to 70% for establishment.

Validação de métodos para determinação do teor de 3-hidroxibutirato e 3-hidroxivalerato em polímero biodegradável

The efficiency of two methods for determining 3-hydroxybutyrate and 3-hydroxyvalerate content in the biopolymer (poly(3-hydroxybutyrate-co-3-hydroxyvalerate) has been evaluated. Both methods are based on (a) the hydrolysis of polymers, (b) the esterification with methyl (method A) and isoamilic alcohol (method B) and (c) analysis of the esters by gas chromatography using flame ionization detection (GC-FID). After optimization of the analytical conditions, the main validation parameters (linearity, quantification limit, detection limit, recovery, sensitivity and precision) were determined showing that both analytical procedures can be applied to control the process of poly(3-hydroxybutyrate) production. However, method B gives better analytical results than method A and has the advantage of not using chlorinated solvents.

Determinação da lixiviação de potássio através das superfícies adaxial e abaxial das folhas

Estudou-se a lixiviação (leaching) de potássio em folhas destacadas de várias plantas através das superfícies adaxial e abaxial sob luz e obscuridade. Os resultados indicam que no lado mais rico em estomatos a lixiviação é maior tanto na luz como na obscuridade, embora as diferenças sejam bem mais acentuadas na obscuridade.

Decomposição de argilas em forno de microondas e determinação simultânea dos seus constituintes principais por espectrometria de emissão óptica em plasma indutivamente acoplado

ANALYSIS OF CLAYS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY AFTER CLOSED-VESSEL MICROWAVE-ASSISTED ACID DECOMPOSITION. In this work a closed-vessel microwave-assisted acid decomposition procedure for clays was developed. Aluminum, Ca, Fe, K, Mg, Na, Si, and Ti were determined in clay digestates by inductively coupled plasma optical emission spectrometry. The most critical parameter for total decomposition of clays was the composition of the reagent mixture. The applied power and the heating time exerted a less critical influence. Best decomposition conditions were attained using a reagent mixture containing 4 mL aqua regia plus 3 mL HF and the heating program was implemented in 12 min. The accuracy of the results was demonstrated using two standard reference materials and a paired t-test showed a good agreement between determined and certified values at a 95% confidence level.

Determinação bromatológica de Pleurotus ostreatus cultivado em resíduos de diferentes cultivares de bananeira

The objective of this work was to evaluate the nutritional composition (raw protein, ether extract, raw fiber, FDA, FDN and ash) of the POS 09/100 strain of Pleurotus ostreatus grown in three combinations of residues (pseudo-stem, leave and pseudo-stem + leaf) and four banana tree cultivars (Thap maeo, Prata ana, Pelipita and Caipira). The basidiomata harvested were submitted to dehydration in a forced ventilation stove with temperature adjusted to 40 degrees C until reaching constant weight, being then grinded in a knife mill. The method proposed by Kjeldahl (1883) was used to determine total nitrogen. The Weende method (AOAC, 1997) was employed to determine crude fiber, acid-detergent fiber (ADF) and neutral detergent fiber (NDF). According to the results obtained, crude protein, ash, ADF and NDF contents varied with the kind of residue and banana tree cultivar; the substrate prepared with leaves of banana tree (Prata Ana cultivar) yielded the highest crude protein (35.4%) and ash (6.7%) contents in the basidiomata of P. streams; the substrate prepared with pseudo-stein of banana tree (Prata Ana cultivar) provided the highest ADF (31.6%) and NDF (41.9%) contents in the basidiomata of P. ostreatus. Ether extract and crude fiber contents of P. ostreatus didn't vary in function of the treatments, with averages of 2.45 and 11.27%, respectively.

Adubação nitrogenada e idade de corte na produção de matéria seca do capim-elefante no Cerrado

The objective of this study was to investigate the effect of the application of N fertilizer and the cutting age on the dry biomass production of elephant grass. The experiment was performed with the variety Paraiso and planted in a Ferralsol in 2008 in the district of Gurupi (State of Tocantins). Four different rates of urea application were tested (0, 50, 100 and 150 kg ha(-1)) and harvests were made at 120, 150 or 180 days after germination (DAG) of the setts. The dry matter and total N accumulation were evaluated. Dry matter production increased with dose of N, the greatest effect being observed at 180 DAG. There was a linear increase in dry matter (R-2 = 0.75**) and N accumulation (R-2 = 0.96**) permitting a productivity of 34 t ha(-1) of dry matter and an accumulation of 471 kg N ha(-1). The N utilization efficiency (biomass production per unit of applied N) increased with plant age. The higher efficiency of N use favored the quality of biomass production for energy production owing to the higher fibre content.

Análise físico-química e composição nutricional da matéria prima e de substratos pré e pós cultivo de Pleurotus ostreatus

The aim of the present study was to carry out the physical, chemical and nutritional analyses of the alternative substrates formulated from wood and agroindustrial residues of the Amazon for Pleurotus ostreatus (Jacq.:Fr.) Kummer cultivation. The determination of C, N, pH, humidity, soluble solids, protein, fat, total fiber ash, carbohydrates (total and available) and energy were carried out. The substrates were formulated from sawdust of Simarouba amara Aubl. (marupa), Ochroma piramidale Cav. ex. Lam. (pau de balsa) and from the stein of Bactris gasipaes Kunth (pupunheira palm tree), and from Saccharum officinarum L. (sugar cane bagasse). The results demonstrated that the nutritional composition of the substrate is variable and the improvement of the quality of the spent substrate (energy and protein increment) promoted by the metabolism of the fungus during the cultivation, contributed for a more nutritive substrate than the initial one, which could be used as a compost for Agaricus sp. cultivation, as organic fertilizer and for bioremediation for contaminated soils.

Determinação da relação central. Estudo sobre as posições laterais da mandíbula, em relação à linha mediana facial, em função de dois métodos para esta determinação.

The authors studied the lateral positional desviations of the mandible, in relation to the facial median line in 30 (thirty) full edentulous patients, with the purpose to verify the influence of the unstrained guided (chinpoint guidance) and deglutition methods for the determination of centric relation. According the results obtained they conclude that the unstrained guided method produced a mandibular lateral desviation with a mean value of the 0.752 mm and in the deglutition method the mean value observed was 1.109 mm. The statistical analysis of the results revealed for the unstrained guided method a proportion of the points to the right and left of the median line not statistically significant, while for the deglutition method the difference was statistically significant at a level of 5%.

Avaliação tardia da função renal em doentes com paracoccidioidomicose tratados com anfotericina B por meio da determinação do ritmo de filtração glomerular com EDTA Cr51

A late survey of the renal function was performed in eighteen patients with paracoccidioidomycosis treated with amphotericin B, according to the glomerular filtration rate (RFG). The method was compartment analysis by single injection using EDTA Cr51, determined by its 'half biological life' and dosages of blood urea nitrogen and creatinine. The patients were seventeen males and one female. They were from 22 to 76 years old. Ten of these patients received 2 g of amphotericin B and eight of them received 4 g. There were no expressive difference between the two groups, taking into account age, dose in mg/kg of weight/day, time of conclusion of the treatment, urea, creatinine, glomerular filtration was smaller than the normal, and average of the half biological life of the EDTA Cr51 was large than the normal. The achieved results permitted us to consider that the amphotericin B determines deficit of renal function. However, by the present study, it hasn't been possible to affirm if the modifications are definitive.

Determinação de dureza de ligas de cobre, na forma como são recebidas e após a fundição, em função das técnicas de fusão.

It was evaluated the Vickers hardness of five high-copper casting alloys, in their original package form and after casting, according to the casting method used. That way, ten ingots, supplied by the manufacturers of each alloy, were included in self-curing acrylic resin, polished, numerated and submitted to Vickers hardness test at load of 200 g during 30 seconds. Afterwards the numerated ingots were removed from the acrylic resin and five of those were cast in an electrical casting machine and the other five in a centrifugal casting machine with an air/gas torch. The specimens obtained were included in self-curing acrylic resin, polished and submitted to Vickers hardness test. As a result it was verified that there is a variation of hardness among the alloys tested, and the use of the electrical casting machine produced lower hardness values than those produced when used the centrifugal casting machine with an air/gas torch. Also, there is a decrease of hardness of the cast alloys when they are tested in their original form and after casting.