Estudo de cerâmicas avançadas para fins de blindagem balística

The research involving new materials has always been considered as a differential in the development of a technology company. This occurred naturally since ancient times, often motivated by reasons of a certain age, where the most common material used was also the name of your time and may be cited as an example the Bronze Age, and later was the Iron. Currently, the use of firearms are they used in resolving conflicts between countries, or a more equivocal, as an instrument of social banditry make innovations in the area of shielding welcome, whether for personal use, in the form of vests or vehicle such as cars, tanks and even aircraft. In this context, is a Silicon Carbide Ceramic, with low density and high hardness. Thus, the aim of this study is the evaluation and comparison of these materials, seeking to improve their properties by means of additives such as boron and silicon metal and amorphous YAG. For this work, the specimens were pre-shaped by means of uniaxial later to be referred for isostatic pressing and sintering. The maximum percentage for each additive was 5%, except for the YAG whose percentage was 8.2% (mass percentage). All compositions were subjected to the same tests (x-ray diffraction, apparent density, optical microscopy, Vickers hardness, scanning electron Microscopita), so that one could draw a comparison between the materials under study, samples that showed better mechanical properties and micro structural, related here by hardness testing and microscopy (optical and SEM) were the silicon carbide doped with YAG and alumina samples, demonstrating the potential of these materials for ballistic protection. Other compositions have high porosity, which is highly undesirable, since in order to harmful influences on the mechanical properties discussed below

Propriedades físico-químicas e mecânicas, potencial bioativo e caracterização da interface dentina-cimento de cimentos endodônticos experimentais à base de cimento Portland associados à radiopacificadores micro e nanoparticulados

Pós-graduação em Odontologia - FOAR

Efeito da utilização de substitutos de gordura em queijos light

Cheeses are known to be sources of calcium, phosphorus and protein, important nutrients for a suitable nutrition. However, certain cheeses imply the ingestion of large amounts of fats, which can cause the development of coronary heart and carcinogenic diseases. Although consumers are aware of the necessity of reducing the fats intake, they are still not pleased with the quality of light cheeses available on the market, because the partial or total fat removal provides some undesirable changes, especially regarding to the product texture and flavor. In order to offer products nutritionally adequate and palatable, alternatives have been developed to improve the characteristics of light cheeses. Such alternatives include the use of fat substitutes, those additives that improve the functional and sensory characteristics of cheeses with reduced fat. Fat substitutes composed of proteins, carbohydrates and lipids, or a combination of them, help the retention of moisture and eliminate the undesirable characteristics of fat reduced-cheeses. In this context, this review aims at reporting the innovations and trends on the use of fat substitutes to produce light cheeses.

Caracterização de cerâmicas a base de nitreto de silício para aplicações estruturais

The need for development of new materials is a natural process in the companies’ technological point of view, seeking improvements in materials and processes. Specifically, among the materials, ceramic exhibit valuable properties, especially the covalent ceramics which have excellent properties for applications which requires the abrasion resistance, hardness, high temperatures, resistence, etc. being a material that has applications in several areas. Most studies are related to improvement of properties, specially fracture toughness that allows the expansion of its application. Among the most promising ceramic materials are silicon nitride (Si3N4) which has excellent properties. The goal of this work was the development and caracterization of Si3N4-based ceramics, doped with yttrium oxide (Y2O3), rar earth concentrate (CTR2O3) and cerium oxide (CeO2) in the same proportion for the evaluation of properties. The powders' mixtures were homogenized, dried and compressed under pressure uniaxial and isostatic. Sintering was carried out in 1850 ⁰C under pressure of 0,1MPa N2 for 1 h with a heating rate of 25 ⁰C / min and cooling in the furnace inertia. The characterizations were performed using Archimedes principle to relative density, weight loss by measuring before and after sintering, phase analysis by X-ray diffraction, microstructure by scanning electron microscope (SEM), hardness and fracture toughness by the method Vickers indentation. The results obtained showed relative density of 97-98%, Vickers hardness 17 to 19 GPa, fracture toughness 5.6 to 6.8 MPa.m1/2, with phases varying from α-SiAlON and β-Si3N4 depending the types of additives used. The results are promising for tribological applications and can be defined according to the types of additives to be used

Estabilização de enzimas: uma abordagem

Enzyme stabilization is one critic point in basic and applied enzymology. The increasing interest in applying enzymes in industrial processes has fostered the search for biocatalysts with new properties or extreme stability. Enzyme stabilization can be achieved by different methods: isolating enzyme variants from organisms living in appropriate extreme environments (extremozymes), by protein engineering, chemical modification, use of additives, immobilization. This brief review aims to give a better understanding of those methods employed for enzyme stabilization.

Electrical Properties at Grain Boundaries Influenced by Cr3+ Diffusion in SnO2.ZnO.Nb2O5-Films Varistor Prepared by Electrophoresis Deposition

SnO2-based varistors are strong candidates to replace the ZnO-based varistors due to ordering fewer additives to improve its electrical behavior as well as by showing similar nonlinear characteristics of ZnO varistors. In this work, SnO2-nanoparticles based-varistors with addition of 1.0 %mol of ZnO and 0.05 %mol of Nb2O5 were synthesized by chemical route. SnO2.ZnO.Nb2O5-films with 5 μm of thickness were obtained by electrophoretic deposition (EPD) of the nanoparticles on Si/Pt substrate from alcoholic suspension of SnO2-based powder. The sintering step was carried out in a microwave oven at 1000 °C for 40 minutes. Then, Cr3+ ions were deposited on the films surface by EPD after the sintering step. Each sample was submitted to different thermal treatments to improve the varistor behavior by diffusion of ions in the samples. The films showed a nonlinear coefficient (α) greater than 9, breakdown voltage (VR) around 60 V, low leakage current (IF ≈ 10-6 A), height potential barrier above 0.5 eV and grain boundary resistivity upward of 107 Ω.cm.

Percepção de risco sanitário na bovinocultura de corte no estado de São Paulo

Pós-graduação em Medicina Veterinária - FCAV

Uso de probiótico e óleos essenciais na ração sobre a microbiota intestinal, atividade de enzimas digestivas e a expressão de genes relacionados aos processos de digestão e absorção de nutrientes em frangos

Pós-graduação em Zootecnia - FCAV

Parâmetros genéticos para integridade óssea do fêmur e estudo da associação dos genes runx2 e tnfs11 em frangos de corte

Pós-graduação em Genética e Melhoramento Animal - FCAV

Calcium silicate-based cements associated with micro-and nanoparticle radiopacifiers: physicochemical properties and bioactivity

The aim of this study was to evaluate the physicochemical properties and bioactivity of two formulations of calcium silicate-based cements containing additives (CSCM) or resin (CSCR), associated with radiopacifying agents zirconium oxide (ZrO2) and niobium oxide (Nb2O5) as micro- and nanoparticles; calcium tungstate (CaWO4); and bismuth oxide (Bi2O3). MTA Angelus was used as control. Methods. Surface features and bioactivity were evaluated by scanning electron microscopy and the chemical composition by energy dispersive X-ray spectrometry (EDS-X). Results. CSCM and CSCR presented larger particle sizes than MTA. Hydroxyapatite deposits were found on the surface of some materials, especially when associated with the radiopacifier with ZrO2 nanoparticles. All the cements presented calcium, silicon, and aluminum in their composition. Conclusion. Both calcium silicate-based cements presented composition and bioactivity similar to MTA when associated with the radiopacifiers evaluated.

Aditivos alternativos aos antibióticos promotores de crescimento no desempenho de frangos de corte sob desafio sanitário

Pós-graduação em Zootecnia - FCAV

Probiótico e ácidos orgânicos na alimentação inicial de frangos de corte: Desempenho zootécnico, morfometria e microbiologia intestinal

Pós-graduação em Ciência e Tecnologia Animal - FEIS

Nanotubos óxidos aplicados a resinas compostas fotoativadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Lipases microbianas: produção, propriedades e aplicações biotecnológicas

Conselho Nacional de Desenvolvimento Científico e Tecnológico(CNPq)

Uso de extratos vegetais, vitaminas e sua associação sobre o desempenho, temperamento e qualidade de carne de bovinos nelore confinados com dieta de alto grão

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)