Dosimetria Física e Controle de Qualidade em Radioterapia

Radiotherapy is a multidisciplinary speciality which uses complex equipment and radiation sources for delivery of treatment, using high-energy ionizing radiation to treat cancer at several stages of complexity. Since radiation therapy is a technique which involves a precalculated radiation dose, it shall be established quality assurance programs that provide an efficient and safety treatment. The International Commission on Radiation Units and Measurements (ICRU) report No. 50 has recommended dose uniformity between 5% of the prescribed dose throughout the region of interest. This is one of the most primordial points that justify the importance of a suitable attendance of the equipments quality and performance. For quality control, the medical physicist will be involved with establishing and running a Quality Control Program (QCP). He must adapt or develop the procedures of equipment acceptance and commissioning, besides verifying the use of principles and accepted protocols of national and international reports to assure the correct quality, quantity, and placement of radiation during the performance of a radiological procedure, establishing adequate protocols to ensure accurate patient dosimetry. This present work consists of a description of the activities carried through the Sectors of Radiation Therapy of the Hospital of Clinics of the Campinas State University (Unicamp), particularly in the implementation of the Quality Control Program

Controle de qualidade em radioterapia: dosimetria de fótons em acelerador linear – Mevatron MXT

The treatment of a tumor with ionizing radiation is an ongoing process with well differentiated stages. These ones include the tumor diagnosis and location, the decision on the treatment strategy, the absorbed dose planning and calculation, the treatment administration, the absorbed dose verification and the evaluation of results in short and long terms. The quality of a radiotherapy procedure is closely linked to factors that may be classified as clinical, such as the diagnosis, the tumor location, the treatment strategy chosen and the continuous treatment reassessment; dosimetric or physical, such as the uncertainty in the dose calculation, its optimization and verification, the suitability of the equipment to provide a radiation beam consistent with the treatment planning; finally, others which are related to the practical application of radiotherapy treatment and the handling of the patient. In order to analyze the radiotherapy quality, one should realize that the three aspects (medical, physical or dosimetric and practical application) should be considered in a combined way. This means that numerous actions of the radiotherapists, medical physicists and technicians in radiotherapy should be held jointly and their knowledge level will significantly affect the treatment quality. In this study, the main physical parameters used in dosimetry are defined as well as determined experimentally for a linear accelerator Mevatron - MXT. With this, it is intended to provide recommendations for the physical aspects of Quality Assurance (QA) in the radiotherapy treatments, and these will usually be applied by professionals in Medical Physics. In addition to these instructions, it is recommended that additional texts are prepared to address in detail the clinical aspects of the treatments QA

Aplicação dos conceitos de RCM e a ferramenta FMEA no aumento de confiabilidade em equipamentos de uma indústria química

The growing demand for quality at competitive prices and fast production process put to the test function in the industrial Maintenance. The need for equipment with high availability to fit this fierce competitiveness makes maintenance becomes essentially reliable. Despite this current context, many companies still have an old view of maintenance, focused only on corrective services, and proposals for change are often neglected due to the sense of urgency day to day. Thus, this study aims to demonstrate through theoretical applicability of simple tool, but of great value in increasing reliability within the maintenance sector of an industry, applying the concepts of Reliability Centered Maintenance – RCM and Analysis tool Failure Modes and Effects – FMEA in equipment of a chemical company directly involved in the manufacturing process of the brake fluid, which this product is used in vehicles around the country. That way, you can identify the types, occurrence and criticality of each failure and evaluate assertively decision making for each device, avoiding unnecessary downtime and potential failures of the same

Identificação de causas especiais no processo que aumentam a ocorrência de poro na solda de tubos de aço: aplicação etapas definir, medir e analisar do DMAIC

This work covers the methodology Six Sigma with the application of the steps Define, Measure and Analyze a company of steel tubes, with the objective of identify special causes in the process that drives the creation of the pore defect in the solder. It is highlighted the fact that this work is the base of an continuous upgrade project that aims in eliminating the occurrence of this defect. The motivation is given to the necessity of improving the productivity of the factory, considering that the defect occurs at random and your causes are unknown. This way, it was defined that the problem to analyze, measured the capability of the process in DPMO and analyzed with the aid of graph by attribute P. The results show the process that present special cases, as well as the process considered ideal, This way it was stated that in this work, the processes destabilized and the controlled, allowing a comparison of the characteristics for the elaboration of concise action plans to eliminate the defect. The project must follow the steps Upgrade and control the methodology Six Sigma, in order to ensure success in his execution, aiming to amplify the competitive edge of the business

Indicadores de qualidade na educação básica: uma discussão a partir dos documentos Indicadores de qualidade na educação da ação educativa e Indice de desenvolvimento da educação básica (IDEB), do MEC

O presente trabalho tem como finalidade discutir o conceito de qualidade em educação a partir dos indicadores propostos pelo Ministério da Educação e Cultura (MEC) e pela Ação Educativa, através da conceituação da ideia de indicadores de qualidade em educação e seus objetivos; da definição o percurso histórico do conceito de indicadores de qualidade em educação e da análise dos indicadores de qualidade em educação propostos pelo documento da Ação Educativa e do MEC, além de analisar formas de avaliação da qualidade da educação propostas pelas duas instituições. Esta pesquisa de natureza qualitativa se constituiu de uma pesquisa qualitativa envolvendo pesquisa bibliográfica e analise documental acerca do tema “Indicadores de Qualidade na Educação Básica”. Para tanto, a presente pesquisa buscou utilizar-se das publicações oficiais como “Indicadores de Qualidade em Educação”, da Ação Educativa e o “Índice de Desenvolvimento na Educação Básica”, do MEC, como fonte documental. A etapa seguinte envolveu o levantamento e seleção das informações relevantes para o tema proposto nesta pesquisa, evidenciando os dados relativos a critérios, formas de aplicação e metodologia usados nos documentos pelas instituições acima citadas que tratam da questão da qualidade em educação no país. A análise dos documentos mostra diferentes formas de avaliação da qualidade da educação, envolvendo quesitos quantitativos como as médias obtidas nas disciplinas de português e matemática, ou ainda, a partir da participação da própria comunidade escolar

Aplicação dos conceitos da ecologia de paisagem para a definição de hotspots de conservação e de conectividade entre o Complexo Cantareira e Nazaré Paulista

The Atlantic Forest biome, reduced to 12% of its original coverage, holds a significant portion of brazilian biodiversity, with high levels of endemism. Among the few remaining areas of the Atlantic, there is the region between the Complex of Cantareira and the municipality of Nazaré Paulista, which will be the object of study of this work. Using the concepts of Landscape Ecology, and analysis of thematic maps, this study aims to characterize the region in a ecologically scaled perspective, identifying two types of hotspots: i) for conservation and ii) for maintain habitat connectivity. Concepts of Landscape Ecology as landscape structure, patches, matrix, corridors (structural and functional) and connectivity, as well as their effects on local biodiversity was adopted and applied in the study region. We also analyzed the effects of roads, hydrographic system, Permanent Protection Areas (PPAs), and Conservation Units for flora and fauna maintenance at regional scale. This allowed us to define strategies and priority areas for the conservation and restoration of forest fragments of Atlantic Forest remnants within the study region. This study generated relevant knowledge for a better planning the region in order to create best conditions for the maintenance of regional biodiversity, and consequently, allowing to improve the quality of life for local population

Estudo da tecnologia RFID e sua aplicação na gestão de estoques

Due to the need of more agility, dynamism and reliability in stock management, the market has turned its attention to RFID, which offers a practical solution and live up to the big corporations' expectations. The search for continuous improvement establishes a direct link with RFID, for its technology offers accurate real time information in any monitored given place. RFID is a radio frequency communication technology. A reader communicates to a tag through waves. This tag can be active, with a battery, or passive, in which its power is supplied by currents induced by the field variation it is exposed to. The RFID technology has a well defined basic principle, but there are many constructive ways of implementing it. The adaptability as well as the flexibility regard to the several kinds of stock in industry, reaching their particular needs. RFID can lower maintenance costs in stock by collecting data more accurately, lowering human error and optimizing the item handling at its reception, exit and while it is inside the company. This paper presents an example of RFID technology applied in a company's stock management. It is possible to prove that there are, in fact, great advantages in implementing this technology, as it creates the opportunity for continuous improvement in stock management, with better application of material, labour and quality tools, since the data collected through an automatized process using RFID are more reliable and dynamic

Aplicação do método desirability para otimização de processo com múltiplas respostas

Currently, the competition between organizations in the pursuit of consumer preference has become increasingly fierce. In addition, consumers have become increasingly demanding due to high speed with which innovations occur, leaving the companies meet and sometimes surpass those expectations In this context, there is the necessity to use methods as mathematical models capable of dealing with the optimization of multiple responses simultaneously. In this context, this study presents an application of techniques of Design of Experiment in a machining process of a NIMONIC 80 alloy, a “superalloy” that has thermal and mechanical properties that make its machining difficult and in order to do this, the Desirability Function was used. As they are determining conditions in the machining capability of the alloy, the roughness and the cutting length were considered as variable settings, and the factors that can influence them are cutting speed, feed rate, cutting depth, inserts type and lubrication. The analysis of the result pointed out how was the influence of all factors on each response and also showed the efficiency and reliability of the method

Estudo da utilização do balanced scorecard na gestão da qualidade e excelência operacional aplicadas a projetos de engenharia em sistemas de potência

The expansion of the electrical system is currently a subject of great importance to the development of Brazil. For its realization, large projects are needed, requiring large-scale investment and realization processes of great complexity. Thus, this type of project has a high strategic importance for the performance of companies that conduct. Seeking a way to determine a method to align traditional practices for measuring quality to the corporate strategic needs, this work is the study of the use of the balanced scorecard methodology, applying quality management and operational excellence, with a focus on projects in power systems. We analyzed some cases of successful application of the methodology in business segments in the next study, culminating in a proposed model of the method

Otimização da extração alcalina com peróxido de hidrogênio em seqüência de branqueamento com aplicação de baixo fator kappa

The new market, focused on sustainability and other environmental concerns, refers to innovations that seek alternative forms of production. In pulp and paper bleaching alternative reagents are studied, for example, hydrogen peroxide, in partial substitution of chlorine dioxide in order to reduce the formation of organochlorines. In this context, this study examined the burden of hydrogen peroxide (H2O2) on alkaline extraction stage (stage Ep) required for the bleaching of pulp with eucalyptus kraft pulp, pre-oxygen delignified to obtain equivalent brightness at 90 ± 0.5% ISO, as well as its effect on quality of pulp produced. The pulp was bleached by the sequence D(Ep)DP, with the application of factor kappa of 0.14 and varying the concentration of hydrogen peroxide in Ep stage three, five, seven and nine kilograms of reagent per ton of pulp absolutely drought. The final P stage was optimized with the use of six, nine and twelve pounds of hydrogen peroxide per ton of absolutely dry pulp to achieve the required brightness. The quality of the pulp produced was analyzed based on the kappa number, the brightness and the viscosity. The methods were performed according to standards set by the standard TAPPI (Technical Association of the Pulp and Paper Industry). The best result was obtained using the following D0Ep(7)D1P(6), which showed a viscosity of 19.9 cP, 89.6% ISO brightness, consumption of 94.9 kg / t of reagents and reagent costs of US$ 28.15, because it showed better pulp quality for a lower cost compared to the others. It was found that the greater the amount of hydrogen peroxide in alkaline extraction, the lower the kappa number and increased the amount of residual hydrogen peroxide. The higher the charge of hydrogen peroxide in Ep stage, the lower the need for hydrogen peroxide in the final P stage, reducing the cost of bleaching

A aplicação da teoria do lean seis sigma na prestação de serviços no setor agrícola

This thesis aims to analyze the applicability of Lean Six Sigma and DMAIC to improve processes focused on agriculture. We discuss the origins of each system separately, Lean Manufacturing, the Toyota plants in Japan, and Six Sigma, by Motorola in the U.S., and then appears to merge them and can meet their complementarities and synergy between their tools. Finally, we describe a case study focused on the harvesting department, applicable to all types of manuals crops, covering the production of fruits, vegetables and greens. This study shows the ability to reduce costs, increase productivity and elimination of defects that the methodology developed with the fusion of Lean Manufacturing with Six Sigma allows

Estudo de caso: aplicação do método DMAIC-White Belt- na redução de latas amassadas em uma produção de leite em pó

This work consists of the implementation of the steps Define, Measure , Analyze , Improve and Control ( DMAIC ) to develop a Six Sigma project in an industry the food industry. The objective was to demonstrate a potential for reducing the occurrence of crushed cans in potting milk powder industry in a White Belt project. The food industry accounts for about 9 % of Brazil's gross domestic product ( GDP ), generating thousands of jobs . Among the major sectors of the food industry is the manufacturing sector of milk , occupies approximately 10 % of the total turnover of the food industry . Brazil is considered today one of the eight largest producers of milk powder in the world. The milk powder is packed , mostly for aluminum cans that are lined internally with varnishes and other materials to protect the milk of metals from aluminum. When the cans are dented food protection is compromised and may lead ingestion causing dis-eases such as botulism. Aiming to solve the problem of dented cans methodology was used as a case study with a quantitative approach through the DMAIC method. Some quality tools used in each step of the project as brainstorming , cause and effect diagram , flowchart , ef-fort and impact matrix, 5W1H , among other Pareto diagram is presented . A survey about the disposal of cans in the company verifying a mean loss and, from this histor-ical , a goal loss was calculated was performed . With the target set we calculated the annual saving design . During application of DMAIC was found that the highest rate of loss occurred in transportation between the factory and the factory that fills cans milk . Several actions were taken to resolve problems that resulted in dented cans and the first two months of phase control it was found that the smaller losses calculated target resulting in a saving for the company. The short time of implementa-tion of the Improve phase did not allow a more detailed a ...

Desenvolvimento e validação do método de difusão em ágar para quantificação de fluconazol cápsulas e aplicação em estudos de estabilidade

O fluconazol é um antifúngico de amplo espectro indicado para o tratamento de infecções fúngicas sistêmicas e superficiais. A determinação da potência dos antimicrobianos é importante no controle e na garantia da qualidade das preparações farmacêuticas e faz-se necessário o desenvolvimento de procedimentos práticos e econômicos que possam ser validados e aplicados no doseamento desses fármacos. Dentre os ensaios microbiológicos, os mais comumente empregados são o de difusão em ágar e o turbidimétrico. O objetivo deste trabalho foi desenvolver e validar métodos microbiológicos para determinação da potência do fluconazol cápsulas. O método de difusão em ágar foi desenvolvido empregando ágar Sabouraud e Candida albicans ATCC 64548 como micro-organismo teste. Foi utilizado o delineamento 3 x 3, segundo preconiza a Farmacopeia Brasileira (2010). A validação do método demonstrou linearidade entre o diâmetro dos halos de inibição e o logaritmo da concentração numa faixa de 25,0 a 100,0 µg/mL. Os resultados foram precisos, com desvio padrão relativo igual a 6,15%, e exatos, com intervalo de tolerância de 97,30%, dentro dos limites permitidos. O método foi aplicado ainda em estudos de estabilidade, nas condições de estresse calor úmido, em câmara climática a 40 ºC e 75% de umidade relativa por 90 dias; calor seco, em estufa a 60 ºC por 66 dias e fotodegradação, em câmara espelhada com luz UVC por 66 e 180 dias. Os valores de teor médio calculados foram de 30,27% para calor úmido; 27,72% para calor seco; 33,29% para fotodegradação durante 66 dias e 25,00% para fotodegradação durante 180 dias

Dinâmica folicular ovariana e bases para a aplicação das biotécnicas da reprodução em bovinos

In the last years Brazil has achieved a leading position in worldwide cattle breeding. This country is consolidating the practice of an intensive and technical level cattle breeding, due to greater emphasis on reproductive efficiency and genetic improvement. The attention given to reproductive efficiency became to enhance the genetic improvement process, by exploiting the full reproductive potential of the animals. The biotechniques applied to reproduction arised to expand the reproductive potential for greater economic return. Are the most important reproductive biotechniques the FTAI and in vivo and in vitro embryo production for embryo transfer. Different hormonal treatments are consolidating to interfere with normal physiology in order to achieve the desired goals. The FTAI works to increase the reproductive rates of cattle through pre-booked artificial insemination in all the females in reproduction, without the need for estrous detection. The in vivo and in vitro embryo production aims to distribute the genetics of males and females genetically improved by transferring their embryos to genetically inferior females. Superovulation treatments designed to prevent the mechanism of dominance, which results in many follicles ovulating simultaneously for in vivo embryo production. To the in vitro embryo production, the technique of ovarian puncture guided by transvaginal ultrasound allows to aspirate a number of quality oocytes. The application of biotech is based on knowledge of the female and ovarian reproductive physiology and knowledge of their acting in different breeds and environments.

Estudo da influência da aplicação do fluido de corte no torneamento da liga de alumínio AA7075

One of the ways to minimize the effects of unproductive time caused by tool wear can be achieved by introducing an efficient system of lubrication and cooling in the process. However, in the last decade the research had the goal to restrict the maximum use of refrigerants and / or lubricants in metal-mechanical production. The important factors that justify this procedure include the operational costs of production, ecological issues, and the legal requirements of environmental conservation and preservation of human health. The purpose of the proposed work is the study of machining by turning with the focus on the influence caused by the application of cutting fluid in several ways of application (abundant and MQF) and also by comparing the results obtained by machining without the presence of fluid . For this purpose, the turning tests are conducted using an aluminum alloy (AA 7075). The response variables to be analyzed were obtained from the roughness (Ra and Ry), the stresses presented (VB) and their progression in relation to the cutting length achieved, the type of chip formed, in addition to changes in the degree of finish (roughness) presented by the turned parts. The results of this study should provide more detailed information about the actual influence of cutting fluids in turning this alloy, which are characterized by high rates of deformation when the formation of damaging your chip machining and also the quality of surface generated. Therefore, it is expected to provide subsidies to promote the optimization of machining this alloy making the most of the role of cutting fluid