Análise microbiológica e imunologica do fluido gengival e proteoma salivar de individuos com Sindrome de Down com doença periodontal

Pós-graduação em Odontologia - FOAR

Análise da relação desempenho/custo de alguns coletores solares comerciais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Dentina humana e bovina: estudo comparativo das propriedades físicas e características da hibridização de sistemas adesivos convencionais ou grander modificados: análise em mev

A adesão longitudinal continua a representar um dos maiores desafios da Odontologia moderna. Uma nova proposta para o estabelecimento do equilíbrio da adesão aos tecidos dentários surge, baseada na observação dos resultados obtidos com a tecnologia Grander para revitalização da água. Objetiva-se com o estudo verificar a influência dessa tecnologia nas propriedades físicas de dois sistemas adesivos (convencional e autocondicionante) à partir da medição da tensão superficial e do ângulo de contato; e avaliar a formação e a qualidade da camada híbrida em dentina humana e bovina. A tensão superficial de quatro diferentes líquidos (água, Single Bond- 3M, Primer do Clearfil SE Bond -Kuraray, e Bond do Clearfil SE-Kuraray), foi medida antes e após a modificação pelo procedimento Grander em aparelho goniômetro (Ramé-hart). O ângulo de contato com três substratos distintos (placa de titânio, dentina humana e dentina bovina), foi medido para os quatro líquidos também antes e após a modificação pelo procedimento Grander, também em goniômetro. A formação e qualidade da camada híbrida, foi avaliada em MEV, a partir da confecção de corpos de prova dos substratos humano e bovino, devidamente embutidos, preparados em lixas de variada granulação até a exposição de dentina, submetidos ao procedimento adesivo (SB ou CSEB) normal ou grander modificado, recebendo ao final dupla camada de resina composta Z250-3M, fotopolimerizada por 40s. Após armazenamento em estufa bacteriológica por 24h, os procedimentos para análise ao MEV foram realizados (fixação, desidratação, secagem e metalização). A estatística de Análise de Variância ANOVA e Teste de Tukey 5% revelou que: houve redução estatisticamente significante da tensão superficial para todos os líquidos Grander modificados; houve redução estatisticamente... (Resumo completo, clicar acesso eletrônico abaixo)

Doença periodontal em cães

Periodontal disease affects the periodontum which are tissues that support and protect the tooth and are composed by the gingiva, alveolar bone, cementum and periodontal ligament. Lesions in the periodontum have as main etiologic agent the presence of plaque or biofilm, which is formed in 24 hours and, basically, it consists of microorganisms surrounded by some bacteria rich matrix products and salivary glycoproteins. Gingivitis is the first clinical manifestation of periodontal disease and it is reversible if the etiologic agent (plaque) is removed. However, if it is not treated or controlled, it will lead to an irreversible periodontitis, and even evolve into alveolar bone, tissue destruction and, eventually, tooth loss

Determinação dos esforços em lajes pelo métodos dos elementos de contorno

Through deductions and formulations of the equations governing the behavior of plates elastic and thin based Kirchhoff theory, it is evident that it is justifiable to the complication of the numerical methods considering the complexity of the equations that describe the physical behavior of these elements and obtaining analytical solutions for specific situations. This study is directed to the application of the numerical method which is based on discretizations to the simplest elements which results in the reduction of data to be processed from. The numerical method in question is the Boundary Element Methods (BEM), as the name suggests, the discretizations are only the edges of the elements. The BEM converts the complex integral equations, in sums of functions that reduce the unknowns at the nodes that define the ends of discrete elements, obtaining internal values to elements using interpolation functions. Confirming the need and usefulness of the BEM, apply, then the foundations necessary to the specific cases of Civil Engineering where traditional methods do not provide the desired support, leaving in question the security situations and economics of the projects

Planejamento, síntese e avaliação da capacidade de doação de óxido nítrico de novos derivados antiinflamatóios

A formação do trombo arterial, composto predominantemente por plaquetas, se dá sob condições de estresse de cisalhamento elevado, nos locais de lesão aterosclerótica vascular e fluxo sanguíneo perturbado e tem como consequência diminuição ou obstrução do calibre dos vasos dos diferentes órgãos podendo levar a eventos isquêmicos. As doenças cardiovasculares são consideradas as principais causas de morte no mundo. Nesse contexto, estima-se que a aterosclerose/aterotrombose seja a causa primária de doença arterial coronariana e acidente vascular cerebral representado mais de 50% das causas de mortes em países ocidentais . É sabido que a aterosclerose, primeiro evento que predispõe à aterotrombose, é considerada um processo inflamatório crônico, e que a utilização de antiinflamatórios não esteroidais (AINEs) COX-1, melhor estabilizam a estrutura da placa ateromatosa impedindo o rompimento e a consequente formação do trombo. Neste contexto, no presente trabalho foram obtidos de novos candidatos a fármacos com propriedades doadoras de NO e antiagregantes plaquetárias, através da estratégia de hibridação molecular dos AINEs contendo uma subunidade doadora de óxido nítrico, representada pelos furoxanos, e espaçada por uma subunidade N-acil hidrazônica. Dessa forma, a inibição da síntese de tromboxanos associada à doação de óxido nítrico permitiu atuação nas plaquetas através de um mecanismo múltiplo de ação com fins de diminuição da agregação plaquetária. Os produtos intermediários e finais apresentaram bons rendimentos e foram caracterizados por técnicas analíticas as quais predisseram que as estruturas propostas foram obtidas. Todos os compostos se como doadores de óxido nítrico. Os compostos 1a e 3a apresentaram atividade analgésica superior a dipirona, utilizada como controle. No ensaio de agregação plaquetária ―in vitro‖... (Resumo completo, clicar acesso eletrônico abaixo)

Determinação dos tipos de resistência de genótipos de soja ao ataque de Spodoptera cosmioides (Walker, 1858) (Lepdoptera: Noctuidae)

The aim of this work was to evaluate the types of resistance of soybean genotypes to the attack of Spodoptera cosmioides (Walker, 1858), under laboratory conditions. Plants of the soybean genotypes, IAC 100, Dowling, PI 227687, PI 274454, BR 16, IGRA RA 626 RR, PI 227682, BRSGO 8360, IGRA RA 516 RR e P 98Y11 RR, were cultivated in vases and placed in a greenhouse in order to have their leaves used afterwards in free-choice and no-choice no-preference for feeding tests and evaluation of the biological parameters of S. cosmioides fed on the genotypes. For free-choice no preference for feeding test, 10 leaf discs were prepared and placed in Petri dishes equidistantly among themselves, and then two recently-hatched caterpillar per genotype were release in the center of the plate. The same test was performed for third instar larvae, so that one caterpillar per genotype was used. In non-choice test, only one genotype was used in each Petri dish, where two recently-hatched or one third instar caterpillars were released, respectively. For both tests, the attractiveness was assessed at 1, 3, 5, 10, 15, 30, 60, 120, 360, 720 and 1440 minutes after the release of the insects. In addition, the leaf area consumed was evaluated. Randomized blocks design and completely randomized design were used for free-choice and non-choice tests, respectively, with 10 replications. In biology test, recently-hatched larvae were transferred to Petri dishes with leaves of the genotypes, evaluating the period of larvae, pupae and overall (larvae + pupae), viability of larvae, pupae and overall, weight of 12 days-old larvae and 24 hours-old pupae and longevity of the adults. Completely randomized design was used for this test, with 30 replications. Genotypes IGRA RA 516 RR and IGRA RA 626 RR were the least and the most consumed by recently-hatched larvae of S. cosmioides, respectively, in non-choice non-preference for feeding test. Genotypes PI 274454 and PI 227687 were...

Caracterização de Bacteriófagos Infectando Isolados Clínicos de Pseudomonas aeruginosa Armazenados em uma Coleção de Cultura

To isolate, to concentrate and to purify bacteriophages from isolates of P. aeruginosa; To observe the capacity of bacteriophages to infect isolates of P. aeruginosa susceptible and multiresitant to antimicrobial; To caractherize bacteriphages by electronic microscopy techniques. 10 isolates of Pseudomonas aeruginosa from LEMC culture collection were submitted to the experiments of ideal temperature for the lyse region appearance in the MaConkey culture plate and 2 extraction methods for the concentration of the phages, clorophorm (Silankorva) and filtration plus centrifugation (Bergan). Three infected clinical isolates of multiresistant P. aeruginosa an one susceptible isolate ( PA01) were evaluated by 3 transmission electron microscopy techniques to caractherize phages morphologically (“on grid”, “on drop” and direct extraction from the lyse region of the culture plate). The ideal temperature to obtain lyses region was 37°C. The stock solutions, obtained through the methodologies of Sillankorva and Bergan, had satisfactory results in infecting the multiresistant isolate and the negative control. Among the 3 techniques of electronic microscopy tested the direct from the lyse plate was the best to obtain the micrography of the phages

Análise das propriedades físico-mecânicas de painel particulado de eucalipto composto por três camadas com duas variações de pressão

The research aimed to produce sheets of particles with waste processing of Eucalyptus sp bonded with urea-formaldehyde and evaluate the effect of pressure variation in the quality of the boards produced. To do so, the Boards made were divided into two treatments depending on the pressing pressure of 30 to 40 kgf / cm². Once pressings, climatized, the particleboards have been sectioned in test samples, and underwent physical-mechanical tests for determining density, swelling and water absorption, modulus of rupture and elasticity in static bending and internal linking. The particleboards pressed at 40 kgf / cm ² showed the best results

Avaliação experimental de medidas de aceleração

Acceleration is a key parameter for engineering and is becoming increasingly important because of the need for companies to become more competitive in the market. Both applying new technologies to their products and optimizing their process lines with predictive maintenance and robotic automation. This study aims to analyze the quality of the signals obtained from a capacitive accelerometer. To do that a test rig was mounted, which consist of a shaker, fed by a signal generator, a linear potentiometer and a capacitive accelerometer; for the signal acquisition was used a acquisition board and the Labview software, in order to integrate twice the signal from the accelerometer and compare it with the sign of the potentiometer. This work also demonstrates the impact of acquired signal processing as well as techniques of pre and post processing of signal via software GNU/Octave

Estudo de placas elásticas pelo metodo dos elementos de contorno

Este trabajo tiene como objetivo principal oferecer una herramienta alternativa para la resolución de placas finas, presentes en edifícios, relacionadas con los métodos de cálculo adquiridos durante la universidad, calculo a través de tablas con pocas condiciones de controno. El método utilizado es el Método de los elementos de contorno que discretiza la placa en partes finitas, aproximando los resultados obtenidos a valores reales. En este trabajo se ha utilizado el programa de ordenador Placas2.for (TAGUTI,Y. 2010) basado en el Método de los elementos de contorno para la resolución de las placas finas con varias condiciones de contorno geométricas y de cargas

Avaliação de momentos fletores em estruturas de fundação tipo radier em concreto armado

It aims the comparison of these moments between an analytical plates theory and a computational numerical simulation. It is accented the details of studies about analytical theory as well the process, step by step, of a program that has as an influence the method of finite elements. The theory of plates has an extremely importance when it is talked about slabs and it takes as a base some fundamental hypotheses (that the middle point of the plate is considered flat and under formable) the points that are normal in relation to the middle surface is not considered because of its intensity that is irrelevant in comparison to the rest. The computational programs offer good results when they are applied in a correct way and, it resolves numerous functions in a short period of time. The objective is to highlight the importance of bending moments, its points of maximum and minimum, that has the objective of realize a good reinforcement sizing for a reinforced concrete. Furthermore, it can propitiate an economy in places that is demanded a small quantity of steel, before dimensioned for a load that is distributed in all the surface of the plate, at the same intensity

Detecção da produção de Biofilme em Staphylococcus aureus e Estafilococos Coagulase-negativa isolados de recém-nascidos

Uma coleção de 50 amostras de Staphylococcus aureus e 50 de estafilococos coagulase-negativa (ECN) isoladas de recém-nascidos (RN) da unidade neonatal do Hospital das Clínicas da Faculdade de Medicina de Botucatu foram estudadas quanto à produção de biofilme. Para isto foi utilizada a técnica de PCR na detecção dos genes icaA, icaC e icaD e os métodos fenotípicos de aderência em placa de poliestireno, aderência em tubo de borossilicato e método do Agar Congo Vermelho (CRA). Dos 50 S. aureus estudados, 100% foram positivos para a produção de biofilme pela PCR, 98% pelo método do tubo, 100% pelo método da placa de poliestireno e 98% pelo CRA. Já das 50 amostras de ECN, 94% foram positivas pela PCR, 76% pelo método do tubo, 82% pelo teste da placa e 74% pelo CRA. Feita a comparação dos métodos utilizados, tendo por referência o padrão-ouro (PCR), foi possível observar que o método que melhor se correlacionou com o padrão-ouro, foi o método da aderência em placa de poliestireno, apresentando melhor sensibilidade e especificidade para ambas as espécies

Plano de iluminação externa da UNESP Campus Itapeva com base em LED e energia solar

This work presents the development of the External Lighting Plan UNESP in the Itapeva Campus based LED and Solar Energy. Firstly it was made a collection of data from measurements of the local transit through the Google Earth 6 software and divide the local in sectors, and then perform an analysis of characteristics and age of the site. With these data it was possible to determine the average luminance the place, in30 lux. After these procedures was possible to determine the type of sets that would perform the role of bridge lighting the kit chosen was the 20/20 Sun LED manufacturer, since it contains the luminaire with the solar panel to the pole. Therefore we determined the number of poles for each sector, whichwas72in total and. After the determination of the location of each point lighting

Processo de esmerilhamento, polimento e caracterização de um Shear Plate

Shearplate is an optical glass plate having two flat surfaces and a small angle between them. The use of a high quality shear plate is essential to implement shear interferometric technique . The shear interferometry is a technique used to evaluate the light beam collimation. In order to guarantee the shearplate quality , the complete manufacturing process must be thoroughly monitored. In the manufacturing process, the first step consisted of the glass selection. The selected glass has been submitted to the process of cutting, gluing, chamfering, grinding and polishing. Each phase has been strictly monitored. The quality of the final result depends extremely on an appropriate starting condition, which arises from the grinding process, as the polishing process only recovers the brightness of the part, acting on a small scale on the wearing off of the part, as well as not changing the structured obtained in the grinding process. Respecting all stages of the manufacturing process, the quality of the part has evolved to a good result. The best result obtained showed PV distance of 162 nm, slightly less than λ / 4. This result is significant because the dimensions of the piece with respect to the dimensions of the polisher what interferes directly in the results. The closer are the dimensions of piece and the dimensions of the polisher, the greater the difficulty in controlling the propagation of errors