293 resultados para degradação de herbicidas
Resumo:
Currently the use of pesticides in agriculture is widespread due to their high effectiveness in combating pests, weeds and diseases leading to better productivity and economical performance in agricultural area. The use of pesticides affects the whole world and their use is often performed in an improper and indiscriminate way and for long periods. Several studies have been carried out in order to verify the presence of pesticides in nature, with worrying results. The presence of higher levels of pesticides and their degradation products in soil and surface and groundwater have indicated increasing contamination. Among the most widely used pesticides, herbicides are present and among these trifluralin has occupied an important place due to its widespread use; it is an herbicide originated from benzene derivatives belonging to dinitroanilines family; it is classified as belonging to group C, being possibly carcinogenic for humans, present a high persistence in soil as a result of its low mobility and therefore may affect local edaphic fauna. Diplopods belong to a group of invertebrates considered important in the soil dynamics; due to their close contact with it, these animals can be used as bioindicators of substrates toxicity. This study aimed to expose diplopod specimens of the species R. padbergi to different concentrations of trifluralin and therefore it was mounted five bioassays containing soil from the site where animals were collected (control group) and the same soil mixed to different concentrations of trifluralin herbicide (concentration recommended for agriculture use, that is, the dose recommended by the producer 0.0534g/m2, double, haft and quarter of this dose), animals were exposed for 7 and 90 days. During the entire period of exposure (90 days), it was observed that the number of animals in the control bioassay remained stable until the 5th week, presenting only... (Complete abstract click electronic access below)
Resumo:
With the increasing demand for electricity, the retraining of transmission lines is necessary despite environmental restrictions and crossings in densely populated areas to build new transmission and distribution lines. Solution is reuse the existent cables, replacing the old conductor cables for new cables with higher capacity power transmission, and control of sag installed. The increasing demand for electrical power has increased the electric current on the wires and therefore, it must bear out temperatures of 150°C or more, without the risk of the increasing sag beyond the established limits. In the case of long crossings or densely populated areas, sag is due to high weight of the cable on clearance. The cable type determines the weight, sag, height and the towers dimensions, which are the items that most influence the investment of the transmission line. Hence, to reduce both cost of investment and maintenance of the line, the use of a lighter cable can reduce both number and the height of the towers, with financial return on short and long term. Therefore, in order to increase the amount of transmitted energy and reduce the number of built towers and sag, is recommended in the current work substitute the current core material (steel or aluminium) for alternatives alloys or new materials, in this case a composite, which has low density, elevated stiffness (elasticity module), thus apply the pultruded carbon fiber with epoxy resin as matrix systems and perform the study of the kinetics of degradation by thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC), according to their respective standards
Resumo:
In most brazilian cities, urban growth has occurred without adequate planning. Consequently, portions of the city were being occupied, often areas unfit for use and occupation of land, causing risks to local residents and decline of urban environmental quality. One of the most frequent problems is the riverbank occupation, causing the deforestation of the riparian vegetation. Given the above, this paper aimed to map the urban sprawl of Rio Claro/SP, as well as riparian vegetation in the vicinity of Corumbataí in the area including the urban area. For this purpose, GIS techniques were used in order to prepare the thematic map of urban expansion, as well as a map of the riparian vegetation through interpretation of aerial photographs in the environment of ARCGIS. From the maps, an analysis of “Plano Diretor” was made in order to verify if the current occupation of urban land meets the stipulations of this legal instrument
Resumo:
A produção de lixo pela humanidade é inevitável, porém, o destino dos residuos sólidos e seu acondicionamento inadequado têm trazido graves problemas ambientais. Dentre os resíduos sólidos, os plásticos merecem destaque, pois cresceram significativamente em uso e descarte, totalizando 20% do volume mundial de lixo. Isto decorre de algumas das propriedades destes materiais, como durabilidade, resistência, leveza e baixo custo de produção. Nas grandes cidades brasileiras, 7% do lixo produzido correspondem a produtos de plástico em filme, geralmente usado em aplicações de curta duração, como o polietileno. Este material persiste no ambiente por décadas, sendo, portanto, resistente à degradação. Diversos destinos podem ser tomados pelo resíduo de polietileno descartado, como a deposição em lixões e aterros sanitários, incineração, reciclagem e biodegradação. A biodegradação pode ser definida como a degradação catalisada por atividade biológica, levando, no final do processo, à mineralização e/ou formação de biomassa. Na natureza, a destruição destes materiais se dá, na verdade, por meio da “degradação ambiental”, na qual atuam sinergeticamente a biodegradação, a fotooxidação, a termo-oxidação e a hidrólise. Neste sentido, desde os anos 1970, diferentes formulações foram propostas para otimizar a susceptibilidade do PE à degradação ambiental. Sabe-se que o PE está sujeito a sofrer mudanças quando exposto à luz ultravioleta e/ou ao calor, e que estas modificações podem alterar a resposta dos microrganismos no processo de biodegradação. Desta forma, este estudo analisou as modificações ocasionadas por tratamentos com luz ultravioleta, calor e exposição ao sol, bem como a resposta da microbiota natural do solo a estes tratamentos, através de análises de espectroscopia... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
O provável fator de início de tradução 5A (eIF5A) é altamente conservado de arqueas a mamíferos e sofre uma modificação pós-traducional única e essencial chamada hipusinação. Este fator já foi relacionado ao transporte nucleocitoplasmático, à degradação de mRNA e à proliferação celular. Dados recentes restabelecem uma função para eIF5A na tradução e sugerem a sua atuação na etapa de elongação ao invés de início, como originalmente proposto. Uma vez que o envolvimento de eIF5A com a degradação de mRNA ainda não foi elucidado, tornou-se interessante estudar qual a natureza desta relação. O metabolismo de mRNA é um processo complexo que envolve as etapas da tradução, repressão da tradução e degradação de mRNA. Na primeira parte deste trabalho, foi avaliada a existência de interação genética sintética entre os mutantes tif51A-1 e tif51A-3 e mutantes de fatores envolvidos com a repressão da tradução e/ou degradação de mRNA. Foi revelada uma supressão parcial do fenótipo de termossensibilidade com nocautes dos genes SBP1, DHH1 e PAT1, que codificam fatores ativadores da remoção do capacete de metilguanosina e repressores da tradução. Por outro lado, uma interação sintético doente (“synthetic sick”) entre os mutantes tif51A-1 e xrn1Δ foi observada.Os dados obtidos reforçam o envolvimento de eIF5A com a elongação da tradução, mostram que o efeito de eIF5A na degradação de mRNA é secundário e sugerem uma função para eIF5A como ativador da tradução. Na segunda etapa são apresentados os resultados do rastreamento de supressores extragênicos do mutante tif51A-1 através de deleções genômicas induzidas por transposon. Foram rastreados aproximadamente 2,2x105 transformantes... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
The objective of the present work was to investigate the potential of cyanobacteria isolated from different environments in decolorizing eleven different types of textile dyes. For inoculum preparation 50 ml of BG-11 medium were used for the cyanobacteria Leptolyngbia CENA103, Leptolyngbia CENA104 and Phormidium autumnale UTEX1580 and 50 ml of SWBG-11 medium for Phormidium sp., Leptolyngbya sp. and Synecochoccus sp. Test tubes containing 10 ml of liquid medium and 0.02% of each dye (remazol, indigo blue, indanthrene blue RCL, drimaren blue CL-R, dispersol blue C-2R, drimaren red CL-5B, dispersol red C- 4G, indanthrene red FBB, drimaren yellow CL-R, palanil yellow 3G and indanthrene yellow 5GF) were inoculated with cyanobacteria. A spectrophotometer was used to verify the maximum absorbance of each dye and the percentage of decolorization and also thin layer chromatography (TLC). The results showed that all the tested cyanobacteria were capable to remove more than 50% of some dyes. The present study confirmed the capacity of cyanobacteria in decolorize and possibly degrade structurally different textile dyes, suggesting the possibility of their application in bioremediation studies. The data are promising, and will lead to further studies of dye degradation and its toxicicity.
Resumo:
Pós-graduação em Agronomia (Produção Vegetal) - FCAV
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento em Pesquisa (CNPq)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Química - IQ
Resumo:
Pós-graduação em Agronomia - FEIS
Resumo:
This study aimed to evaluate the force degradation of synthetic elastics over time using dynamic biomechanical tests in order to find clinical parameters of what size of elastic and frequency of exchange should be used in orthodontic therapy. It was used 240 elastics of Dental Morelli, sizes 1/8", 3/16", 1/4 "and 5/16", medium force, divided in four groups. In each group was measured forces at different times, from immediate to 72 hours after immersion in water at 37°C and incubated stretched to 600% of its initial inner diameter. Tensile tests were performed on a universal testing machine EMIC DL2000 submerged in distilled water maintained at 37°C. Data were analyzed using SPSS version 16.0, by the Analysis of Variance (One-Way) with Tukey´s post test. There was a greater increase in pattern of force decay of immediate measurement until 24 hours in all sizes of synthetic elastics, from which it was observed a decrease in force progressively smaller, with the exception of 5/16´´ elastic with a maximum force decay occurred at 12h. It was concluded that: the elastic synthetic Dental Morelli suffered significant force degradation over time, with reduction of approximately 70% of the initial force during 24 hours of stretching, followed by a progressively smaller decrease; the amount of stretch for a ideal force in intermaxillary therapies depends on the distance between the points of attachment of elastic, being necessary to consult the tables to choose the size, force and frequency of replacement.