351 resultados para Trapas estruturais (Geologia do petróleo)


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The mining research is a complex activity, which should preferably involve the combination of direct and indirect techniques of geological research. The increasing demand for base metals in domestic and international markets provide the revaluation of mineral occurrences, which can be converted into deposits and mines. This paper presents the results of the application of geophysical methods of electric resistivity and induced polarization in main foliation parallel to the arrangement of the area, in a deposit of oxides and hydroxides in massive and disseminated ores, docked in gneisses and quartzites, located in the municipality of Itapira, in the North of the State of São Paulo in Brazil. Inversion models indicate the predominance of high cargabilidade that partially coincide with low resistivity values. Integration of geophysical data made possible the drafting of sections of electric walking with cross-checking distance x depth, for detailing your target. The integrated analysis of geophysical and geological structural data leads to the conclusion that the primary mining suffers structural control with the regional foliation in ores

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The area where the study was conducted is located in the central-western state of Goias. It geologically inserts the northern portion of the Greenstone Belt of Faina which belongs to the Archean terranes that fits in Brasília Fold Belt and Tocantins Structural Province. This region is known for its greenstone lode gold potential and it was heavily exploited by pioneers and prospectors, leaving many records for where they have been through. Preliminary work done by Orinoco Brasil Mineração in their required areas at the region showed that the environment is promising for gold mineralization and that the ore is controlled by structures. Therefore the objectives of this work were the geological and structural mapping in semi detail scale to improve geological, stratigraphic and structural controls present attributing possible ore understanding. With the development of the work there were recognized on the desktop three structural domains separated by a thrust fault. For each domain were discriminated the geological units ranging in gneisses, quartzites formed from coarse sediments arcoseanos, and schists. By mapping structures there were found five deformation phases, Dn-2, Dn-1, the Dn event that generated the main foliation (Sn) in high representation and two post-stages Dn with brittle late manifestations. The detail mapping of the Rattlesnake Gallery showed that the mineralized quartz vein is consistent with axial-plane foliation Sn-2 belonging to the oldest deformation Dn-2 phase and that the high grade is distributed in the hinge region folds of the same phase

Relevância:

20.00% 20.00%

Publicador:

Resumo:

On the grounds of the great advances achieved over recent years, the process HF/ERW (High-Frequency/Electric Resistance Welding)welded pipe have played an active role in the oil and gas industry for deep water applications, at high and extremely low temperatures, under high pressure and in highly corrosive environments, gradually replacing manufactured pipes by other processes. However, studies have shown that defects in the welded joints are a the leading causes of pipelines failures, which has required the determination of toughness values in this region, in compliance with the strict recommendations of the codes and standards with manufacturers and construction companies, on the oil and gas sector. As part of the validation process required toughness values, this research project focuses on a microstructural analysis in HF / ERW tubes microalloyed, steel grade API 5CT P110, designed to explore oil and gas in deep waters, the subject of strategic relevance to the country because of the recent discoveries in the Santos mega fields: Tupi and Libra (pre-salt). In this scientific work will be presented and discussed the results of mechanical tensile and Charpy, a few CTOD tests curves (showing the trend of toughness values to be obtained), and the microstructures of the base material obtained by optical microscopy, with special emphasis on the formation of nonmetallic inclusions in the welded joint

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In engineering, for correct designing the structural components required for cyclical stresses, it is necessary to determine a limit of resistance to fatigue, which is the maximum amplitude of the applied tension under which the fatigue failure does not occurs after a certain number cycles. The marine environment is hostile, not only by the high pressure, corrosion, but also by low temperatures. Petrol Production units, composed of the risers (pipelines connecting the oil well to the ship), are dimensioned to remain installed for periods of 20 up to 30 years, and must therefore be prepared to support various efforts, such as tidal, wind currents and everything that is related. This paper focuses on a study on the fatigue behavior of microalloyed steel, API 5L Grade X70, used to transport oil and gas by pipelines. For analysis, we obtained the curves S-N (stress vs. number of cycles) using laboratory data collected from cylindrical longitudinal and transverse specimens used in axial fatigue test in accordance with ASTM E466. The tensile tests and microhardness were performed to characterize the mechanical properties of the samples, and it was found that the values meet the specifications of the standard API 5L. To characterize microstructurally the material, it was also made a metallographic analysis of the steel under study, and the origin of the fatigue crack was investigated with the support of a scanning electron microscope (SEM).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In order to enable the reuse of the large surplus volume of petroleum produced water for irrigation of crops inedible, the quality evaluation of this water is very important. This work aimed to evaluate the effectiveness of the diffusive gradient in thin films technique (DGT) for the determination of labile Cu (II), Mn (II) and Zn (II) in petroleum produced water destined to reuse in agriculture. Samples were collected at the exit of the wastewater treatment plant (WWTP) (after separation oil/water and flotation) of a Petrobrás onshore production region. Basically, the laboratory experiments with DGT devices involved the evaluation of the behavior of the main variables of the technique for determination of analytes in the samples (diffusion coefficients, immersion time, fractionation of organic and inorganic species, and performance of diffusion gels with different porosities, among others). Also, experiments were conducted based on the solid phase extraction (SPE) protocol with Chelex- 100 resin using previously established protocols to support the study. During the project the possibility of in situ immersions in water treatment plants was evaluated. The DGT technique presented satisfactory results for determination of Mn in produced water, and can be used for in situ determinations. However, the results obtained for Cu and Zn show the need of additional studies

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Os efluentes de indústrias, como refinarias e petroquímicas, frequentemente contém elevadas concentrações de substâncias tóxicas, dentre elas, os compostos fenólicos. Estas substâncias, mesmo em pequenas quantidades, afetam as propriedades organolépticas da água, além de que durante o processo de cloração da água potável, podem ser transformadas em clorofenóis e policlorofenóis, pela reação com o cloro, formando substâncias com características carcinogênicas. Neste sentido, o refino do petróleo produz grande variedade de poluentes cujas propriedades modificam-se em função dos processos utilizados. Os fenóis são compostos tóxicos, com características fungicida e desinfetante, sendo tóxico para a maioria dos microrganismos, além de apresentarem ação de carcinogenicidade, mutagenicidade e serem recalcitrantes, acumulam-se nos corpos receptores, gerando danos à saúde e à vida aquática. No entanto, embora o fenol possua ação bactericida, alguns microrganismos adquiriram a habilidade de se adaptar e utilizar este composto como fonte de carbono e energia. O presente trabalho pretendeu selecionar linhagens bacterianas, a partir do efluente de uma refinaria de petróleo, da região de Paulínia – SP, que sejam capazes de utilizar altos teores de fenóis como fonte de carbono e energia para seu crescimento e desenvolvimento, a fim de serem aplicadas nas estações de tratamento de efluentes industriais, com foco nas refinarias de petróleo. Foram isoladas 3 linhagens a partir das amostras enriquecidas do efluente da refinaria e, após os ensaios, constatou-se que 1 linhagem apresentou resistência à concentração de fenol de 1.000 mg.L-1. Os ensaios de biodegradação e crescimento em fenol como única fonte de carbono, demonstraram que estas linhagens são capazes de biodegradar aproximadamente 20% do fenol disponível no meio, no período de 24 horas. A quantificação do fenol residual foi realizada em...

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The Aquidauana Formation is characterized by sandstones of variable granulation, mudstones and diamectites abundant in clay, typical colors like brick red (vermelho tijolo) of glacial, fluvial and lacustrine origin. It’s chronostratigraphic equivalent to the Itarará group from the Neo Carboniferous age, that under the exploratory view, such units represent important intervals in the basin, occurring together with them minerals as well as energy resources as petroleum, underground water and coal – what requires a great paleogeography and stratigraphy knowledge for its exploration. By gathering information from the columnar sections of the area, it was possible to characterize the sedimentary facies, the stacking pattern as well as the association. It was also made an attempt of stratigraphic correlation, which showed great difficulties since glacial environments present a great lateral discontinuity of the facies besides the complex relationship process of formation. As a result, it was obtained 8 sedimentary facies, the lateral and vertical relations and genesis process. It is proposed that the sedimentary environment in the study area is the fluvio glacial, characterized by alluvial systems formed by defrosted water which transport the sediments that are deposited in plains in front of the glacier (distal outwash). Petrographic thin section analysis showed that the transportation process was ineffective. The grains present punctual to lobular contacts, characterizing good porosity and permeability to the rock, varying these qualities according to more or less existence of matrix. The presence of Iron Oxide deposited between the recrystallization border and feldspathic mineral indicates that this rock has possibly presented a primary rubefaction, intensified by alkaline fluid percolation

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The area of this work is located along the Northern portion of the Pelotas´s basin. The onshore region extends from the Southern portion São Paulo State to the North of Rio Grande do Sul State, with a total area of 440 530 km ². The objective of the research is to characterize the main geological structures of the outcropping basement in the Paraná Basin and its correlation with the offshore portion of the Pelotas Basin. The characterization was performed through the integration of surface (SRTM images and outcrops) and subsurface data (seismic data and well logs), the method includes the use of remote sensing techniques and seismic interpretation. The main structures to be analyzed are the Tibagi Lineament and the “Torres Syncline in order to verify its influence on the geological evolution and deformation of the basin. As result, it was identified the continuity of the both structures inside the offshore basin (Pelotas Basin); but only the Tibagi Lineament represents an important structural feature in the offshore basin. In this sense, the Tibagi lineament shows a NW-SE direction along the both basins (Pelotas and Paraná) and it is defined by drainages and relief on the continental portion. It was classified as a graben structure limited by normal faults and it also was verified a trend of faults inside the lineament that cuts all the sedimentary package of Itararé Group from Paraná Basin. The Torres syncline is a structure that connects the arches of Ponta Grossa and Rio Grande, showing NW-SE orientation and a low angle dip in the NW direction. Its projection into the Pelotas Basin was not recognized by the methods applied in this work, because a preliminary analyze indicates that its projection corresponds to a structural high inside the Pelotas Basin

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The oil market is not a common market, and its complexity increases dramatically when considering the strategic and geopolitical involved, thus resulting in large uncertainties and concerns. The attempt to control prices has always been a challenge for the major world powers, since the increase in oil prices benefits the exporting countries, but harms importers, especially those regarded as less developed. Understand and try to predict some strategies adopted up the oil crises is one of the main points of the research, in order to demonstrate how economics can be used as an instrument of power and domination between nations, and how plans and strategies and rearrangements of supply and demand favor the growth of this economy, especially in the current period, with the new Brazilian oil era, beginning with the discovery of pre-salt, amid a context of growing need for the use of oil and its derivatives

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Acoustic communication is essential in mammals and has three main functions: acquisition of information about the environment, intraspecific communication and detection of predators and prey. Studies indicate that the introduction of sounds produced by anthropogenic activities such as military exercises, use of sonar and activities related to the extraction of oil and natural gas can cause interference in cetacean communication. Recently, the discovery of pre-salt tends to increase these activities. After a decade since the launch date of IBAMA`s licensing and before the imminent increase in exploration activities in Brazil, it is essential to conduct studies to monitor closely the impact of this type of activity on the marine ecosystem. Thus, this study aims to identify potential impacts that the process of oil and natural gas exploration and production might have on the communication of baleen whales. Data from literature on bioacoustics and ecology of these animals were linked with technical-scientific data regarding this type of activity. 310 documents related to the topic were analyzed. Among them only 81 documents are of academic origin, and the others mostly action plans and reports from government agencies. 80% of the documents do not have any species as a focus, and in the remaining 20%, 17% were focused on the Greenland Whale (Balaena mysticetus) and 22% on the gray whale (Eschrichtius robustus). The main impacts identified in this study were the increased frequency and amplitude of vocalization, reduction or cessation of more elaborate songs and masking problems

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O presente estudo investigou aspectos estruturais (florística e fitossociologia) e ecológicos (síndromes de dispersão e classes sucessionais) de um hectare de Floresta Ombrófila Densa Submontana, localizada no Núcleo Picinguaba, município de Ubatuba, São Paulo, com objetivo de analisar a similaridade da área com outros levantamentos sob mesma fisionomia e avaliar o estágio sucessional da mata para o trecho considerado. A área estudada (Parcela C) compõe uma das parcelas amostrais do Projeto Temático “Composição florística, estrutura e funcionamento da Floresta Ombrófila Densa dos Núcleos Picinguaba e Santa Virgínia do Parque Estadual da Serra do Mar” do Programa BIOTA-FAPESP. O levantamento compreendeu todos os indivíduos arbóreos com DAP ≥ 4,8 totalizando 1.246 indivíduos. Foram encontradas 131 espécies distribuídas em 38 famílias. O índice de diversidade de Shannon foi de H’= 3, 981 nat.ind.-1 e o índice de equitabilidade de Pielou foi de J’ = 0,815. A família Myrtaceae se destacou com a maior riqueza de espécies (36), seguida de Fabaceae (12) e Rubiaceae (11) que registrou, ainda, a maior quantidade de indivíduos, com 225 plantas. O maior valor de importância foi anotado para Euterpe edulis (6,95%) abrangendo 9,95% do total de indivíduos registrados. As espécies, subseqüentes, mais abundantes foram Mollinedia schottiana (7,54%), Coussarea meridionalis (5,86%), Bathysa mendoncaei (5,54%) e Guapira opposita (2,80%). A área apresentou elevada dominância de espécies zoocóricas (86% das espécies classificadas) e não pioneiras (74%), indicando um estágio avançado de sucessão da área analisada. Os padrões estruturais e ecológicos encontrados para a comunidade investigada apóiam os conceitos de alta diversidade florística e sugerem intrínsecas relações entre planta e animais em Florestas Atlânticas

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This research presents a study of structural complexes formed between the bothropstoxin BthTX-I and PrTX-I and phospholipase A2 (PLA2s) inhibitor 12- methoxy-4-methyl-voachalotine (MMV) of Tabernamontana catharinensis and rosmarinic acid (Cv-RA) of Rosmarinus officinalis. For both were used cocrystallization experiments with the toxins and inhibitors. In the future, the experimental three-dimensional structures of these complexes will be obtained through the technique of crystallography. Simultaneously, construction occurred in silico of inhibitors Cv-RA and MMV and attempts of docking between these binders and protein structures. These theoretical data provide important information regarding the nature of interactions between inhibitors, toxins and structural changes induced by the protein molecule inhibitors. Therefore, the acquisition of this information has great value to identification, characterization and development (drug design) of compounds with great potential for biotechnology and drug use. Considering further and more relevant aplications, these compounds could be used to control symptoms in many cases of ophidic poisoning and also in combating of pathological processes (degenerative inflammatory diseases and auto-immune diseases, Alzheimer's disease, schizophrenia, among others) whose causes are related to molecules belonging to the same groups of proteins which are classified bothropstoxin that were studied in this project

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The Santos Basin is located in the Brazilian continental margin and includes the coast of Santa Catarina, Paraná, São Paulo and Rio de Janeiro states. Its northern limit is the Campos Basin through the High of Cabo Frio and the southern one with the Pelotas Basin through the Platform of Florianópolis, totaling an area of approximately 350,000 square kilometers in a water depth of 3,000 m. The Paranapanema Lineament has WNW / ESE direction, and extends from the area filled by the Paraná Basin, on the border between the states of Sao Paulo and Parana, lasting up to near the ocean floor along with the fracture zone of Rio de Janeiro. The Capricorn Lineament is a feature inherited from the separation between the continents of Africa and South America, and is the main structural feature NW / SE of the Santos Basin center-south region. These two structures together with other ones with continental origin may be associated with structural features in the sediments from the Santos Basin. This work aims to characterize the structures operating in the central portion of the Santos Basin based on subsurface data in the offshore area (2D seismic) together with data from the surface of the continental basement in a way to correlate the Santos Basin structures with the continental regional traits. This data interpolation showed that the structural features of the continent operates on the submerged zone, the seismic sections show these structural trends for the Paranapanema Lineament / Fracture Zone of Rio de Janeiro, Capricorn Lineament and two fault zones that exhibit structures typical of a transfer zone

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In civil engineering, a structure is the whole sustainment of a construction and, thus, it is important that it remains intact throughout its lifetime. An engineering construction must last for decades without losing its functionality. However its purpose may be altered and several times the original structure does not meet the new needs of use. Still, in new buildings, the functionality is altered due to possible flaws in execution and the structure, invariably does not reach the desired solicitation needs. In cases like this, the commonly adopted solutions are, basically, the demolishment followed by the reconstruction of the desired mold or the structural reinforcement. This second option, for long years, has not been put to practice due to certain factors such as the high costs for its implantation, use of inadequate reinforcement execution techniques, and the culture of people involved in the area regarding its use and, in this case, the option would always be the reconstruction. Thoughtout the years, some techniques were developed to allow the execution of structural reinforcements with low costs and in efficient ways. An interesting, fast, efficient and economical technique is the structural reinforcement through metal sheets put together with epoxy resin that can be applied in beams, slabs and pillars. In the present work the different behavior of beams reinforced with this technique. Steel is a very recommended material for these reinforcements due to its characteristics related to traction, compression and the effectiveness of the technique related to its cost. For the attachment the epoxy resin is recommended, since it allows the joining of two materials, in this case, steel and concrete. The efficiency of this union is so considerably high that it rarely produces any flaws in adherence and, normally, when it happens it is due to problems in the execution process, not in the union of materials