268 resultados para Pulverização e polvilhação na agricultura


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to build and validate a low cost reduced-scale wind tunnel for drift evaluation on pesticide application technology. The work was carried out at the NEMPA - Núcleo de Ensaio de Máquinas e Pneus Agroflorestais (NEMPA), FCA/UNESP, Departamento de Engenharia Rural, Botucatu/SP, Brazil. The wind tunnel main characteristics were an open circuit and a closed working section with a fan blowing air into the tunnel. Screens were fitted downstream after the fan in order to stabilize the air flow on the working section. The tunnel was built with 3.0 mm eucalyptus hardboard, with a total length of 4.8 m and a squared section of 0.56 m. The air flow was provided by a 180 W axial fan. The system was adjusted and calibrated to provide a laminar and stable flow at 2.0 m s-1. Validation studies were carried out by using a Teejet XR 8003 flat fan nozzle at 200 kPa (medium droplets) to apply a spray solutions containing water plus a food dye (Blue FDC) at 0,6% m v-1 mixed with two adjuvants: a polymer based anti drift formulation at 0,06% m v-1 and a sodium lauryl ether sulfate based surfactant at 0,2% v v-1. After a 10-second application the drift was collected on nylon strips transversally fixed along the tunnel at different distances from the nozzle and different high from the bottom part of the tunnel. Drift deposits were evaluated by spectrophotometry. The wind tunnel had low levels of turbulence and high repeatability of the data, which means that the flow was uniform and able to be used for carrying out measures to estimate drift. The validation results showed that the tunnel was effective to enable comparative drift measurements on the spray solution used in this work making possible the evaluation of drift risk potential under those spray technologies. The use of an adjuvant based on a polymer reduced the amount of drift from the nozzle compared to the surfactant.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to evaluate the influence of fine and medium droplets in the performance of flutriafol and thiophanate methyl + flutriafol for the control of Asian Soybean Rust (Phakopsora pachyrhizi Sydow & Sydow). The experiment was a 2 x 2 factorial design (2 droplet sizes x 2 fungicides) resulting in four treatments with six replications. The experimental area was set up with 24 plots (50 x 21 m). In each plot there was a central assessment area with 10 x 20 m. To the each plot there was a non-treated area placed in opposed direction to the wind. The evaluations of rust control were made by of the calculation of incidence (percentage of plants with rust), severity (level of infection), defoliations and soybean yield. The results were analyzed by the calculation of the confidence interval at 90%. The study was set up in curative control conditions with average infestation of 68.6%, average severity in the lower part of the canopy was of 35.9% and on the upper parte it was 4.57%. The results of severity, defoliation and productivity did not show statistical difference among the treatments. However, it was observed that in general there was tendency of better results with the application of flutriafol alone comparing with thiophanate methyl + flutriafol, since there was a small difference between two commercial products in the flutriafol active ingredient content (62.5 g ha-1 to the flutriafol alone and 60 g ha-1 to the thiophanate methyl + flutriafol). There was no statistical difference between fine and medium droplets. This fact can be explained by the characteristics of systemic action of the flutriafol and by the type of control made (curative). The flutriafol, being a systemic fungicide is less sensitive to the better coverage provided by the smaller droplets and, on the curative control, the amount of product deposited can became more import than coverage, mainly on the superior part of the leaves. These leaves are healthier than the inferior leaves that in general are the first to become completely compromised by the rust, losing importance to the plant. By this reason, medium droplets appear to have offered similar performance even not offering advantages in the leaf coverage. This fact may become important because in the practical side of the use of medium droplets, since this may increase the amount of time to spray, mainly because the fine and very fine droplets have more limitations related to drift and evaporation.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to evaluate the evolution of calibration and maintenance practices for crop sprayers on soybean production areas in Brazil, in the 2006 and 2007 seasons, based on the Project IPP data. Therefore, the evaluation covered issues related to calibration, maintenance condition and the main components of 103 sprayers distributed in the following states: Rio Grande do Sul (35), Paraná (60), and, Mato Grosso do Sul (8). The evaluations were done at the rate of one sprayer per farm. The most frequent problems were related to the pressure gauge, spray leaks and calibration errors greater than 50% of the desired volume rate. The analysis of the application rate showed a tendency for the farmers to apply volume rates below the desired value. In 2006 the errors of the application rate were significant, with 70.4% for Rio Grande do Sul State, 74.5% for Paraná State and 37.5% for Mato Grosso do Sul State. In 2007 there was a reduction of errors, with averages of 50.0% for Rio Grande do Sul and 66.7% for Paraná. In general terms, the results showed improvements on the use, maintenance and calibration processes for crop sprayers on the areas covered by the Project IPP, with reductions on average indexes for calibration errors, leaks and bad tips, among other issues.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present study had as objectives to verify the effect of rainfastness of different flutriafol formulations, in laboratory conditions, applied on soybean plants with and without the oil adjuvant in the spray solution, as well as to verify the influence of the oil on the droplet spectrum. The experiment considered ten spray solutions related to five treatments containing flutriafol (four formulations of flutriafol and a flutriafol mixture with tebuconazole), all applied with and without mineral oil. Particles size analysis were based on the determination of the droplet spectrum, medium volumetric diameter and the amount of droplets below 100 μm. All the solutions were sprayed with Teejet XR 11001 (fine droplets). Droplet spectrum was determined in a direct way by diffraction of laser (Malvern Mastersizer S®, version 2.15). Confidence interval at 90% degree was used to compare the mean data. The results showed that the addition of mineral oil in the solutions provided tendencies of larger medium volumetric diameter, smaller amount of droplets below than 100 µm and better uniformity of the droplet spectrum. All of the solutions with the addition of mineral oil presented larger adhesion and/or absorption of the fungicide on the plants in comparison with the solutions without oil. The increase of the time between the application and the rain, caused reduction of the fungicide removal, independently of the rain intensity. The increase of the amount of rain didn't change the relative behavior among the solutions; however, this larger amount of rain caused larger fungicide removal along the time. It was observed significant removal of flutriafol by the rain up to 48 hours after the spray application.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to evaluate the quality of spray droplet spectrum on coffee tree, by using different equipments and syrup volumes. The experiment was set up in a coffee farm, Acaiá variety, Campos Gerais city, MG, Brazil. The treatments were three syrup volumes (150, 300 and 600 L/ha). The lower volume was sprayed with the pneumatic sprayer Martignani, Whirlwind B612 Autonom-Trac mode, and the other volume rates using the conventional hydraulic sprayer to coffee tree. It was possible concludes that the spray volume can be reduced in applications on coffee tree using the pneumatic sprayer.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Geografia - IGCE

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Desde o momento em que o homem passou a aglomerar-se em centros urbanos e formar as cidades, trouxe consigo ainda algumas das práticas que realizava no ambiente rural. Ainda que limitado pela disponibilidade de espaço nas cidades, o hábito de cultivar plantas ornamentais, comestíveis e medicinais, acompanhou o homem, e hoje, mesmo nos maiores centros urbanos pode-se encontrar diversas experiências dessas práticas. O interesse de órgãos públicos, privados e universidades por esse assunto vêm crescendo nas ultimas décadas, nas quais, cada vez mais, percebe-se a urgência de melhorar a qualidade socioambiental nos centros urbanos. A agricultura urbana e periurbana (AUP) tem se mostrado uma ferramenta muito eficaz para lidar com difíceis desafios das grandes cidades, como a gestão dos resíduos sólidos, da escassez de água, da insegurança alimentar e nutricional de populações marginalizadas, da diminuição da biodiversidade, da exclusão social e da má qualidade de vida, entre outras. A AUP mostra-se, além de tudo, muito versátil, podendo ser realizada em diversos contextos ambientais e sociais. Nesse trabalho, compilamos uma série de artigos e textos já publicados sobre esse tema, apresentando os principais conceitos envolvidos. Através de revisão bibliográfica sistematizamos informações teóricas recolhidas e disponibilizando-as de forma sucinta e clara, para que projetos nesse ramo tenham acesso a esse compilado. Inicialmente, agrupamos os referenciais teóricos sobre agricultura urbana a partir do conceito que a define como objeto de estudo. No segundo capítulo abordamos a relação entre as práticas de AUP e a Ecologia, buscando compreender a influência que essas práticas têm no ambiente urbano. No terceiro e último capítulo discutimos o papel que algumas instituições têm para o bom desenvolvimento de iniciativas em AUP. Ao longo dos três capítulos, apresentamos exemplos práticos que ocorrem no Brasil...

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This monograph is part of the works developed in the Scientific Initiation aimed at updating and improving the Atlas of Brazilian Agrarian Question - AQAB. For pioneering and scope of work-matrix, the objective this first part focused on the development of issues related to agricultural production, being drawn maps with data from the Municipal Agricultural Production-PAM 2012; Municipal Livestock Research-PPM 2012; Production of Vegetable Extraction and Forestry-2012, all analyzed from bibliographic review and joint interpretation of tables and graphs. Pari passu, this topic allowed the development of studies on peasant farms, because they are correlated subjects. Peasant farmers produce large portion of the food served to the population. Its features are its mode of production in the field, the way in which the activities take place within the family, the struggle for their social reproduction and by the earth, the practice of polyculture, preservation of the environment and the genetic diversity of species. The surplus production is sold on the market to meet other family demands unmet by production on their properties. We understand that both terms; Peasant or Farmer, refer to the same subject, but with different interpretations of their way of social reproduction and market relations...

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC